Gun and Game Forums - View Single Post

MAX7.62 · 05-19-2005, 08:39 AM

The safety lever is on the lower which is part if the original rifle. Normally Century uses longer pins to prevent the lever from going to the "rock & roll" position, is this FAL a Century built rifle or a kit gun built on a Century reciever by someone else?
Basically the forward position is for full auto - if all the parts are there. Most all FAL variants have the same safe, semi, auto positions except for the Israeli pattern rifles. Just to be "safe" for compliance purposes, I would suggest getting a semi only safety lever which has a "cam" on top to prevent the lever from being switched to the auto position.

05-19-2005, 08:39 AM	#2
MAX7.62 Senior Member Join Date: Mar 2002 Location: Classified Posts: 934	The safety lever is on the lower which is part if the original rifle. Normally Century uses longer pins to prevent the lever from going to the "rock & roll" position, is this FAL a Century built rifle or a kit gun built on a Century reciever by someone else? Basically the forward position is for full auto - if all the parts are there. Most all FAL variants have the same safe, semi, auto positions except for the Israeli pattern rifles. Just to be "safe" for compliance purposes, I would suggest getting a semi only safety lever which has a "cam" on top to prevent the lever from being switched to the auto position. __________________ The Second Amendment, it ain't about DUCK HUNTING! I feel more like I do now that I did when I first got here!