Building an X39 Mauser?

BattleRifleG3 · 10-04-2005, 01:44 AM

Due to the shortage of non-corrossive 8x57mm, and my girlfriend's love for all things Mauser, I'm thinking of the economy of rebarreling a Mauser in X39. Wondering what would be the easiest and most cost effective way to do it.

Or would I be better off going with 308, as the barrels are probably easier to find and that's about all it would need compared to the X39?

myarmor · 10-04-2005, 05:22 AM

I think it would be a killer project. Though like you said unless you go for custom barrel, Be hard pressed to find a barrrel already chambered for it. Very cool idea, suprised I didn't think about it.

Big Dog · 10-04-2005, 12:39 PM

BRG3, over on Gunboards, one of the admins, either Vic or Tuco, showed a pic of his project rifle. He used an SKS barrel, mounted in an Italian Carcano action! The boltface is so close, it required very little modification.
This might be the way to go . . .

BattleRifleG3 · 10-04-2005, 06:06 PM

Hmm, does sound like a good idea. I was assuming the Mauser bolt face would be ok, but perhaps the Carcano one would be better. Guess I could afford to do some research.

rebel727 · 10-04-2005, 07:45 PM

Being a rimmed cartridge it will require a good bit of bolt face and extractor work to use the x39 in an 8mm Mauser. The .308 however needs only a barrel change. Everything else matches up.

Snakebite · 10-04-2005, 10:01 PM

BRG, I guess I'll go the obvious way and save you a bunch of money.

RELOAD the 8mm with non corrosive stuff and keep as is. One great round, no modification and you can tailor make it for your needs.

But, if was going to rebarrel, it would be the .308

BattleRifleG3 · 10-04-2005, 10:48 PM

Quote:

Originally Posted by rebel727

Being a rimmed cartridge it will require a good bit of bolt face and extractor work to use the x39 in an 8mm Mauser. The .308 however needs only a barrel change. Everything else matches up.

Um, X39 is rimless. Rim is slightly smaller, but not much.

myarmor · 10-04-2005, 11:29 PM

perhaps this is the perfect time to rebarrel a Mosin action

What about an Enfield? The Carcanos are cheap but the ammo is outrageous. All the more reason to convert one I guess. A Mauser action would be really long too, but I am sure it can be done like BigDog said with the SKS barrel....that's incrediabily interesting to me, what a cool project.

rebel727 · 10-05-2005, 07:58 AM

Quote:

Originally Posted by BattleRifleG3

Um, X39 is rimless. Rim is slightly smaller, but not much.

My bad, was thinking of 7.62x54 Russian

BattleRifleG3 · 10-06-2005, 01:22 AM

Enfield barrels are the right bore diameter. All it needs is the barrel turned back and rechambered. There's a company doing these called "Special Interest Arms" calling them the Enfield K.

Johan Malan · 10-06-2005, 12:10 PM

Your girlfriend rocks!! Battle rifle! Mauser fan me'self.
Have you tried European ammo makers for 8mm Try Norma

BattleRifleG3 · 10-06-2005, 12:28 PM

I think there's a portugese brand that's the cheapest so far. $10 a box of 20.

Vintovki · 10-07-2005, 06:20 PM

Personally I don't see the corrosive ammo as a hinderance. Proper cleaning after the shooting session assures clean bores. I'd rather put my money into inexpensive corrosive ammo and clean the firearms properly, the money you save over the cost of rebarreling will offset the cost of building a pink elephant.

lefty o · 10-08-2005, 01:21 AM

$10 for 20rnds- sheesh. reloading is the answer. lefty's super hotrod 8x57 mauser using a decent hornady bullet costs just under $6 for 20rnds. with a lower grade bullet and a little less powder(no fun in that), im sure i could come in for about 5.25 a box. get a set of 8x57 dies and go to town reloading.

10-04-2005, 01:44 AM	#1
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401 Images: 13	Building an X39 Mauser? Due to the shortage of non-corrossive 8x57mm, and my girlfriend's love for all things Mauser, I'm thinking of the economy of rebarreling a Mauser in X39. Wondering what would be the easiest and most cost effective way to do it. Or would I be better off going with 308, as the barrels are probably easier to find and that's about all it would need compared to the X39? __________________ Trust is earned, not... GIVEN away. - Worf

10-04-2005, 12:39 PM	#3
Big Dog Moderator Join Date: Mar 2002 Location: Tallahassee, Florida Posts: 10,214	BRG3, over on Gunboards, one of the admins, either Vic or Tuco, showed a pic of his project rifle. He used an SKS barrel, mounted in an Italian Carcano action! The boltface is so close, it required very little modification. This might be the way to go . . . __________________ Moderator of: AR15/M16, M14/M1A, New/Beginning Shooters and Militaria/Collectables.

10-04-2005, 06:06 PM	#4
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401 Images: 13	Hmm, does sound like a good idea. I was assuming the Mauser bolt face would be ok, but perhaps the Carcano one would be better. Guess I could afford to do some research. __________________ Trust is earned, not... GIVEN away. - Worf

10-04-2005, 07:45 PM	#5
rebel727 Senior Member Join Date: Mar 2005 Location: Heidelberg, Mississippi Posts: 1,547	Being a rimmed cartridge it will require a good bit of bolt face and extractor work to use the x39 in an 8mm Mauser. The .308 however needs only a barrel change. Everything else matches up. __________________ North-1 South-0 HALFTIME!

10-06-2005, 01:22 AM	#10
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401 Images: 13	Enfield barrels are the right bore diameter. All it needs is the barrel turned back and rechambered. There's a company doing these called "Special Interest Arms" calling them the Enfield K. __________________ Trust is earned, not... GIVEN away. - Worf

10-04-2005, 05:22 AM	#2
myarmor Senior Member Join Date: Jul 2004 Location: Southwest ,VA Posts: 1,147	I think it would be a killer project. Though like you said unless you go for custom barrel, Be hard pressed to find a barrrel already chambered for it. Very cool idea, suprised I didn't think about it.

10-04-2005, 10:01 PM	#6
Snakebite Senior Member Join Date: Mar 2002 Location: Tucson, Mexico Posts: 1,839	BRG, I guess I'll go the obvious way and save you a bunch of money. RELOAD the 8mm with non corrosive stuff and keep as is. One great round, no modification and you can tailor make it for your needs. But, if was going to rebarrel, it would be the .308

10-04-2005, 11:29 PM	#8
myarmor Senior Member Join Date: Jul 2004 Location: Southwest ,VA Posts: 1,147	perhaps this is the perfect time to rebarrel a Mosin action What about an Enfield? The Carcanos are cheap but the ammo is outrageous. All the more reason to convert one I guess. A Mauser action would be really long too, but I am sure it can be done like BigDog said with the SKS barrel....that's incrediabily interesting to me, what a cool project.

10-06-2005, 12:10 PM	#11
Johan Malan Senior Member Join Date: Aug 2005 Location: Saskatchewan Canada Posts: 302	Your girlfriend rocks!! Battle rifle! Mauser fan me'self. Have you tried European ammo makers for 8mm Try Norma

10-06-2005, 12:28 PM	#12
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401 Images: 13	I think there's a portugese brand that's the cheapest so far. $10 a box of 20. __________________ Trust is earned, not... GIVEN away. - Worf

10-07-2005, 06:20 PM	#13
Vintovki Senior Member Join Date: Dec 2004 Posts: 139 Images: 3	Personally I don't see the corrosive ammo as a hinderance. Proper cleaning after the shooting session assures clean bores. I'd rather put my money into inexpensive corrosive ammo and clean the firearms properly, the money you save over the cost of rebarreling will offset the cost of building a pink elephant. __________________ "Quemadmoeum gladius neminem occidit, occidentis telum est." - Seneca

10-08-2005, 01:21 AM	#14
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,806	$10 for 20rnds- sheesh. reloading is the answer. lefty's super hotrod 8x57 mauser using a decent hornady bullet costs just under $6 for 20rnds. with a lower grade bullet and a little less powder(no fun in that), im sure i could come in for about 5.25 a box. get a set of 8x57 dies and go to town reloading.