| | |||||||
| Notices |
| View Poll Results: would you buy a Polish Makarov 64 ? | |||
| yes | | 10 | 58.82% |
| no | | 7 | 41.18% |
| Voters: 17. You may not vote on this poll | |||
| | Thread Tools |
| | #1 |
| Guest
Posts: n/a
|
Polish Makarov 64 9MM Makarov Caliber (9x18) $139.95 ( 2 or more... $129.95 ea.) (two free spare mags! Makes your pistol cost only $119.00!) Unissued… Beautiful… and NEVER imported to the U.S. before! These are very rare pistols and are sure thing for collectors. These are new condition pistols in powerful 9x18 caliber. RETAIL: $279.00 #SHG-P64 NOT FOR SALE IN CALIFORNIA from http://www.southernohiogun.com/surplushandguns.html |
| |
| | #2 |
| Guest
Posts: n/a
|
Type: Double Action Calibers: 9x18 Makarov Weight unloaded: 635 g Length: 155 mm Barrel length: 85 mm Capacity: 6 rounds The P-64 pistol (official designation 9 mm pistolet wz. 1964) has been developed in Poland during late 1950s and early 1960s, as a compact and lightweight replacement for Tokarev TT pistols, manufactured in Poland under soviet license. Following the Soviet road, Poland replaced the powerful 7.62x25mm ammunition with less powerful, but still effective 9x18 Makarov ammunition. P-64 has been used by both Polish military and police, and still could be found in holsters of some Polish police officers. In military service it has been superceded in mid-1980s by the P-83 pistol. The P-64 was small and light enough for a pocket or a concealed carry sidearm, but it has too small magazine, and too heavy trigger pull to be considered as a valuable service pistol. The severe felt recoil also did not helped to establish popularity for this gun. P-64 is a blowback operated, semi-automatic weapon, made almost entirely of steel. P-64 is hammer fired, with double-action trigger and decocking safety, mounted at the left side of the slide. Safety features also include loaded chamber indicator in the form of a small pin, which protrudes from the back of the slide, above the hammer, when chamber is loaded with cartridge. Trigger guard is a separate unit, which is hinged to the frame and served as a disassembly lever when pulled down. Single stack magazine contains only 6 rounds, and magazine release catch is located at the bottom of the grip. |
| |
| | #3 |
| Senior Member Join Date: Mar 2002 Location: Texas
Posts: 1,879
|
ppk clone
__________________ Submitted with respect to all |
| | |
| | #4 |
| Guest
Posts: n/a
| I have been looking for a makarov but I can't find one, might have to settle for one of these |
| |
| | #5 |
| Guest
Posts: n/a
|
The P-64 appeared on the US surplus market in 2004 on the heels of the Makarov pistol. With the Bulgarian Makarovs having largely dried up, distributors often labeled these a "Polish Makarovs". In fact, they are nothing alike except that they are chambered in 9x18 Makarov. While more compact than the Makarov, they are not nearly as shootable as the Makarov largely due to its horrendously heavy double-action trigger pull. Still, they are worth considering as part of a 9x18 Makarov collection. :target: |
| |
| | #6 |
| Senior Member Join Date: Mar 2002 Location: Texas
Posts: 1,879
|
Bullet Proof you should get one but just know it is not a true PM thereare plenty makerovs around, why cany you find one? go to gun broker.com
__________________ Submitted with respect to all |
| | |
| | #7 |
| Guest
Posts: n/a
| I looked at one today..just doesn't feel right in my hand |
| |
| | #8 |
| Senior Member Join Date: Mar 2002 Location: Texas
Posts: 1,879
|
which the PM or the polish thing The one I have seen looked awfully small for a 9mm mak cartrige ill bet it is a bear to shoot straight. that is why I cant go with a smaller CCW I refuse to pack a pistol I cant fire accurately. the ppk's are just too small for my big mits a j frame smith is also very hard for me to shoot accurately I need a bigger handle but hey you may like it fine.
__________________ Submitted with respect to all |
| | |
| | #9 |
| Senior Member Join Date: Apr 2002 Location: Buckeye Arizona
Posts: 156
|
It sure ain't a Makarov!!
__________________ I traded my manners for a handgun!!!!! :assult: |
| | |
| | #10 | ||
| Guest
Posts: n/a
| Quote:
Quote:
| ||
| |
| | #11 |
| Member Join Date: Apr 2005 Location: Louisiana
Posts: 21
|
trigger pull can be fixed by changing springs only6.00 from makorov.com VIET NAM VETS MC FOREVER GUMBO1 |
| | |
| | #12 |
| Registered User Join Date: Jan 2006 Location: California
Posts: 1
|
Dogonneit I really need to get out of california! 1 coqui |
| | |
| | #13 |
| Super Moderator ![]() |
for the same money you could get a new Bersa
__________________ "Homeland Security is the responsibility of an armed citizen" ME http://webpages.charter.net/s.s.v/ |
| | |
| | #14 | |
| Senior Member | Quote:
__________________ Spocrest Out!.......... | |
| | |
| | #15 | |
| Senior Member Join Date: Apr 2002 Location: Buckeye Arizona
Posts: 156
| Quote:
The P64 is more of a PPK clone. The only thing it shares with the PM is caliber. This resulted from the Soviet standardization within the Warsaw Pact nations. Members could adapt the PM or develop their own, but it had to be in 9mm Mak caliber. The Hungarian PA63 is an example of this. East Germany and Bulgaria adapted and produced the PM. China adapted it as well. It has now been learned that Estonia also imported, from the Soviet Union, the PM for it's use. Hungary and Poland developed their own pistols chambered for the Soviet round. Czechoslovakia produced the Vz82, also in 9mm Makarov. I'm not sure what Yugoslavia used.
__________________ I traded my manners for a handgun!!!!! :assult: | |
| | |