| well, the fluid that is used is 1part white vinegar 1 part ammonia and 2 parts water. i used 2 c-cell batteries and an old stainless steel cleaning rod.and some wire. i put electrical tape around the end of the rod until it was the right diameter to plug the barrel at the muzzle.then i put a couple wraps of tape about every 12in. or so ,so that the rod does not touch the barrel. the rod MUST not touch barrel!then use baster or very small funnel to put fluid in barrel standing on end.hook positive wire to barrel and negative to rod. as soon as you hook up the wires the fluid should start bubbling.let it do its stuff for about 45min. checking fluid level fill as needed every 15min.my cleaning rod was BLACK when i took it out.i just stood it up in the tub. this really does work ,and they want over $100 for the machine that does the same thing!scotchbrite the rod to use again. |