Reducing Pa-63 trigger pull

Zen900 · 11-16-2006, 11:11 PM

.
I removed 1/4" from the old trigger/hammer spring and achieved a very user friendly trigger. I doubt you could remove more than 1/4" but I recommend removing lengths in 1/8" increments. The trigger pull origonally was around 15lbs now its a fourth of that. You probably don't need a new trigger spring however the recoil spring was useless mush and had to be replaced.

dgray64 · 09-07-2007, 09:47 PM

Try the Wolff Co 11# spring for the recoil and the hammer (2 springs), plus get a new firing pin spring as well and enjoy a NEW GUN!

Dave

11-16-2006, 11:11 PM	#1
Zen900 Senior Member Join Date: Dec 2005 Posts: 700	Reducing Pa-63 trigger pull . I removed 1/4" from the old trigger/hammer spring and achieved a very user friendly trigger. I doubt you could remove more than 1/4" but I recommend removing lengths in 1/8" increments. The trigger pull origonally was around 15lbs now its a fourth of that. You probably don't need a new trigger spring however the recoil spring was useless mush and had to be replaced.

09-07-2007, 09:47 PM	#2
dgray64 Senior Member Join Date: Aug 2007 Location: central Texas Posts: 209	Try the Wolff Co 11# spring for the recoil and the hammer (2 springs), plus get a new firing pin spring as well and enjoy a NEW GUN! Dave