Gun and Game Forums - View Single Post

Deersniper · 12-02-2006, 10:55 PM

This is getting better and better.This gun is very balanced for me. Had a glitch or two, but I've adjusted it out. Groups are getting better since I went factory grips and:
FTRB: was solved by correcting alignment to the guide rod which was binding some times.
FTF: Took out slide stop lever and polished the inside part smooth [Hydra Shocks]
SIGHTS: Took Dial indicator and marked 90 Thousandths from each edge of gap on rear sights. Started with a centered 1/16 pilot drill recess, and followed with a 1/8 drill recess. Two silver dots. Then the front, filed down the "incline" to the highest point of the sight creating a Wall. Then I carefully put a 1/16 dot there. Now I have three dots.
Future: Enlarge and flare the ejection port and trigger job.
Eats Ball, and Hydra Shocks gets 4" at 25 yds, so far.

12-02-2006, 10:55 PM	#1
Deersniper Senior Member Join Date: Mar 2006 Posts: 1,165	GI Champ This is getting better and better.This gun is very balanced for me. Had a glitch or two, but I've adjusted it out. Groups are getting better since I went factory grips and: FTRB: was solved by correcting alignment to the guide rod which was binding some times. FTF: Took out slide stop lever and polished the inside part smooth [Hydra Shocks] SIGHTS: Took Dial indicator and marked 90 Thousandths from each edge of gap on rear sights. Started with a centered 1/16 pilot drill recess, and followed with a 1/8 drill recess. Two silver dots. Then the front, filed down the "incline" to the highest point of the sight creating a Wall. Then I carefully put a 1/16 dot there. Now I have three dots. Future: Enlarge and flare the ejection port and trigger job. Eats Ball, and Hydra Shocks gets 4" at 25 yds, so far.