Convert CZ52 to 9mm pics and help

ruger22com · 06-10-2007, 02:49 AM

I had mentioned I was converting my already souped up CZ52 to 9mm as that makes ammo a lot easier to store/buy....so I slapped together a webpage with 16 photos and step by step instructions on how to do it. I got my barrel for $45 or so at Aim Surplus, but I think they sold out now...but they do pop up from time to time....here is the page:
cz52 upgrade page

Mooseman684 · 06-10-2007, 03:11 AM

Well done, and very informative !
Rich

Big Dog · 06-10-2007, 06:48 AM

Very timely and appreciated, Bob! My 9mm CZ52 barrel is supposed to arrive Tuesday! Me and my shooting buddy both ordered them last week.
AIM sent me a UPS tracking number, so I must have got in under the wire.

spenceresgordo · 06-10-2007, 07:20 AM

My 9mm is a great gun i like it alot

bigandrich44 · 06-10-2007, 08:15 AM

Gordo, whats the make and model?

SilverRun · 06-10-2007, 10:15 PM

I saw those barrels at Aim. I thought about getting one - then I realized that the caliber is one of my favorite things about the CZ-52. I have other 9mm - if I want to shoot that caliber. The 7.62x25 is a great little round! I wish it were more widely available and utilized.

just_a_car · 06-10-2007, 11:08 PM

*pst!* Hey SilverRun, go check out Classic Arms Inc., they've still got 800 round cans for $99.95+shipping and 1600 rounds for $189.95+shipping. 12.5 and 11.9 cents per round, respectively.

Zen900 · 06-10-2007, 11:38 PM

A 9mm round is much shorter than the very long 7.62 x 25 round. I saw the barrels at AIM last week but wondered how the 9mm round would work in the CZ52 magazine. Lots of leftover space in the magazine.

Big Dog · 06-12-2007, 08:29 PM

WHOOHOO! I got my 9mm barrel! UPS delivered it at 9:10 tonight. I didn't know they delivered so late!

Now, to make the roller swap, and buy a couple boxes of 9mm ammo . . .

ruger22com · 06-13-2007, 03:46 PM

I did get a few jams even after lubbing her up....I think the length of the round is the problem....anyone else?

Burke · 07-10-2007, 12:13 AM

I know that 7.62x25 will go through Class2 Body Armor and it will also go through 3" Bullet resistant glass (I'll post pics)
The 9mm Luger penetrated the glass but failed to go through.

Pretty cool though...and great detail in your pics..you obviously know what you're doing. I would like to see the difference in recoil w/ that same frame config from the 7.62 to the 9mm. I bet its a lot more manageable w/ all the wieight behind the gun in the 9mm

Big Dog · 07-10-2007, 04:57 AM

I wasn't able to get the pin out of mine - it bent my el-cheapo Chinese pin-punch! So I'm ordering the rollers, pin and sliding block, and will make a complete second barel assembly - then swapping calibers will be easier.
My buddy did swap his over. It shot well, but he did have the occasional stovepipe. It didn't 'bark' quite as loud as it used to.

Tex in Maine · 07-11-2007, 04:13 PM

Car AIM has the ammo $119.95 for 1,224 rd, works out to 0.09 cents a round.

Beer Forever · 07-11-2007, 05:05 PM

I have a CZ-82 and CZ-75, but always wanted a 52. I had no idea that you could convert them to 9mm. Does it use the same mag? What is a good price for the 52? I was going to get a PA 63, but I think that I will with the 52 instead.

ArkansasHunter · 07-11-2007, 05:19 PM

I want one too. Can you get one as nice as the one in the pictures ?

ruger22com · 07-12-2007, 03:49 PM

Quote:

Originally Posted by ArkansasHunter

I want one too. Can you get one as nice as the one in the pictures ?

Thanks!
The one in the pic has aftermarket grips (I don't know if the guy still makes them that I got mine from..he also made them in colors, but I like the black look) and a stainless firing pin that won't break and gives a very light trigger pull.

The gun originally had a ton of cosmo hidden in every nook and crany...I eventually had to strip it all the way down and steam clean all the gunk out of it...took about an hour with a high pressure steam cleaner. then a little tinkering and some breakfree clp lube..and one it is now one fine pistol!

NRAJOE · 07-12-2007, 03:52 PM

If I hadn't gotten laid off for 6 months a couple years ago I'd still have 7 of them...only kept the nicest black one with Wolf 16.5 lb spring added.

ArkansasHunter · 07-12-2007, 03:57 PM

I know the sources have been posted to where you can buy one of these pistols, but would someone kindly repost the sites again please.
Thanks A.H

NRAJOE · 07-12-2007, 03:59 PM

C&R Guns

AIM Surplus and Used Handguns Surplus and Used Handguns

Surplus Handguns

ezearln · 07-19-2007, 03:57 PM

Read yer PM's A.H. you old rascal you!

06-10-2007, 02:49 AM	#1
ruger22com Senior Member Join Date: Apr 2004 Location: Mobile Alabama Posts: 723 Trader Rating: (0)	Convert CZ52 to 9mm pics and help I had mentioned I was converting my already souped up CZ52 to 9mm as that makes ammo a lot easier to store/buy....so I slapped together a webpage with 16 photos and step by step instructions on how to do it. I got my barrel for $45 or so at Aim Surplus, but I think they sold out now...but they do pop up from time to time....here is the page: cz52 upgrade page __________________ www.CheapGunParts.com http://ruger22.com/art/banners/tiny.gif Home of the "YELLOW JACKET" Bolt Buffer and Takedown Bolts! Free Shipping & Lifetime Warranty!

06-10-2007, 03:11 AM	#2
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,272 Trader Rating: (0)	Well done, and very informative ! Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

06-10-2007, 06:48 AM	#3
Big Dog Moderator Join Date: Mar 2002 Location: Tallahassee, Florida Posts: 10,069 Trader Rating: (0)	Very timely and appreciated, Bob! My 9mm CZ52 barrel is supposed to arrive Tuesday! Me and my shooting buddy both ordered them last week. AIM sent me a UPS tracking number, so I must have got in under the wire. __________________ Moderator of: AR15/M16, M14/M1A, New/Beginning Shooters and Militaria/Collectables.

06-10-2007, 08:15 AM	#5
bigandrich44 Senior Member Join Date: Aug 2006 Posts: 1,013 Trader Rating: (0)	Gordo, whats the make and model? __________________ http://img406.imageshack.us/img406/1...eehobosig9.png

06-10-2007, 11:08 PM	#7
just_a_car Senior Member Join Date: Oct 2006 Location: Edmonds, WA Posts: 3,417 Trader Rating: (0)	pst! Hey SilverRun, go check out Classic Arms Inc., they've still got 800 round cans for $99.95+shipping and 1600 rounds for $189.95+shipping. 12.5 and 11.9 cents per round, respectively. __________________

06-10-2007, 07:20 AM	#4
spenceresgordo Registered User Join Date: Jun 2007 Posts: 1 Trader Rating: (0)	My 9mm is a great gun i like it alot

06-10-2007, 10:15 PM	#6
SilverRun Senior Member Join Date: Jun 2004 Location: AL Posts: 1,659 Trader Rating: (0)	I saw those barrels at Aim. I thought about getting one - then I realized that the caliber is one of my favorite things about the CZ-52. I have other 9mm - if I want to shoot that caliber. The 7.62x25 is a great little round! I wish it were more widely available and utilized.

06-10-2007, 11:38 PM	#8
Zen900 Senior Member Join Date: Dec 2005 Posts: 686 Trader Rating: (0)	A 9mm round is much shorter than the very long 7.62 x 25 round. I saw the barrels at AIM last week but wondered how the 9mm round would work in the CZ52 magazine. Lots of leftover space in the magazine.

06-12-2007, 08:29 PM	#9
Big Dog Moderator Join Date: Mar 2002 Location: Tallahassee, Florida Posts: 10,069 Trader Rating: (0)	WHOOHOO! I got my 9mm barrel! UPS delivered it at 9:10 tonight. I didn't know they delivered so late! Now, to make the roller swap, and buy a couple boxes of 9mm ammo . . . __________________ Moderator of: AR15/M16, M14/M1A, New/Beginning Shooters and Militaria/Collectables.

06-13-2007, 03:46 PM	#10
ruger22com Senior Member Join Date: Apr 2004 Location: Mobile Alabama Posts: 723 Trader Rating: (0)	I did get a few jams even after lubbing her up....I think the length of the round is the problem....anyone else? __________________ www.CheapGunParts.com http://ruger22.com/art/banners/tiny.gif Home of the "YELLOW JACKET" Bolt Buffer and Takedown Bolts! Free Shipping & Lifetime Warranty!

07-10-2007, 12:13 AM	#11
Burke Ahh..Cordite. Join Date: Jul 2007 Location: Gun City, Arizona Posts: 485 Trader Rating: (0)	I know that 7.62x25 will go through Class2 Body Armor and it will also go through 3" Bullet resistant glass (I'll post pics) The 9mm Luger penetrated the glass but failed to go through. Pretty cool though...and great detail in your pics..you obviously know what you're doing. I would like to see the difference in recoil w/ that same frame config from the 7.62 to the 9mm. I bet its a lot more manageable w/ all the wieight behind the gun in the 9mm

07-10-2007, 04:57 AM	#12
Big Dog Moderator Join Date: Mar 2002 Location: Tallahassee, Florida Posts: 10,069 Trader Rating: (0)	I wasn't able to get the pin out of mine - it bent my el-cheapo Chinese pin-punch! So I'm ordering the rollers, pin and sliding block, and will make a complete second barel assembly - then swapping calibers will be easier. My buddy did swap his over. It shot well, but he did have the occasional stovepipe. It didn't 'bark' quite as loud as it used to. __________________ Moderator of: AR15/M16, M14/M1A, New/Beginning Shooters and Militaria/Collectables.

07-11-2007, 04:13 PM	#13
Tex in Maine Senior Member Join Date: Jun 2007 Location: Norway, Maine Posts: 235 Trader Rating: (0)	Car AIM has the ammo $119.95 for 1,224 rd, works out to 0.09 cents a round. __________________ Man's Prayer: Oh Lord I'm a man, but I can change... if I have to...I guess.

07-11-2007, 05:05 PM	#14
Beer Forever Senior Member Join Date: Dec 2005 Location: Tucson, AZ Posts: 2,696 Trader Rating: (0)	I have a CZ-82 and CZ-75, but always wanted a 52. I had no idea that you could convert them to 9mm. Does it use the same mag? What is a good price for the 52? I was going to get a PA 63, but I think that I will with the 52 instead. __________________ Paramedic sks forever Last edited by Beer Forever; 07-11-2007 at 05:07 PM.

07-11-2007, 05:19 PM	#15
ArkansasHunter Senior Member Join Date: Mar 2007 Location: South Arkansas Posts: 10,525 Trader Rating: (0)	I want one too. Can you get one as nice as the one in the pictures ?

07-12-2007, 03:52 PM	#17
NRAJOE Senior Member Join Date: Apr 2002 Location: Toledo,OH Posts: 19,014 Trader Rating: (0)	If I hadn't gotten laid off for 6 months a couple years ago I'd still have 7 of them...only kept the nicest black one with Wolf 16.5 lb spring added. __________________ U.S. Army 1976-1979 237th Combat Engineers Heilbronn, Germany

07-12-2007, 03:57 PM	#18
ArkansasHunter Senior Member Join Date: Mar 2007 Location: South Arkansas Posts: 10,525 Trader Rating: (0)	I know the sources have been posted to where you can buy one of these pistols, but would someone kindly repost the sites again please. Thanks A.H

07-12-2007, 03:59 PM	#19
NRAJOE Senior Member Join Date: Apr 2002 Location: Toledo,OH Posts: 19,014 Trader Rating: (0)	C&R Guns AIM Surplus and Used Handguns Surplus and Used Handguns Surplus Handguns __________________ U.S. Army 1976-1979 237th Combat Engineers Heilbronn, Germany

07-19-2007, 03:57 PM	#20
ezearln Senior Member Join Date: May 2007 Location: Texas Hill Country Posts: 3,178 Trader Rating: (0)	Read yer PM's A.H. you old rascal you! __________________ "You can have my Freedom when I'm done with it!"