30 round clip for cetme

meatloaf · 06-17-2007, 12:36 AM

I have veard of thirty round mags for cetme. does any one know where i can get one, or two,or more? (lol) and is there any thing out there that can hold more for my cetme?

Big Dog · 06-17-2007, 05:59 AM

There are three choices . . .
1) Original CETME steel thirty rounder - rare but they are out there, I have one.
2) HK thirty rounder - they are more available. Should work okay.
3) Cobbled-together out of two twenty-rounders welded up. Poor reputation - stay clear of these!

sean46953 · 06-17-2007, 03:49 PM

Yeah, the CETME 30 rounders are hard to find and expensive when you do find them, but there's one at Floridagunworks.com for $65. Here's the link to it Cetme Factory 30rnd Magazine**RARE --Florida GunWorks - Parts for the AR15, AK47, FNFAL, HK, Mini 14, Mini 30 & MP5 at Florida Gun Works Hope that helps
Sean M. Hartman

meatloaf · 06-18-2007, 07:47 PM

Big dog you are right, thirty round mags are exspensive! Cost more than they seem to be worth, I think I'll stick to the twenty round mags. After all I could buy three steel cetme mags or a ton of HK alluminum mags. Thanks for everyones input.

sean46953 · 06-19-2007, 12:00 AM

HEY! Don't pay $65 for that one at Florida Gun Works man! I found one for an HK at $24! Atlantic firearms - AR15 & AK47 rifles - Olympic arms at wholesale prices. Look at that page, you'll see it man. It's one for an HK, but from what I've read, it should work. You may have to "fit" it a bit, but if it doesn't fit right up, you could just sell it. It's your call though. Hope this helps!
Sean M. Hartman

rocketmonty · 06-26-2007, 10:06 PM

have a few 30rd and 1 50,ill post picture later. plus still have one receiver in the white .

meatloaf · 06-30-2007, 02:53 AM

Beta company is building a onehundred round c-mag, it will weigh ten pounds when fully loaded. No price yet on it but it will probably be 300+, its supposed to be released in august. Thats going to make for 22 pounds of **** raising fun! saving my pennies!

just_a_car · 06-30-2007, 07:22 PM

Quote:

Originally Posted by meatloaf

Beta company is building a onehundred round c-mag, it will weigh ten pounds when fully loaded. No price yet on it but it will probably be 300+, its supposed to be released in august. Thats going to make for 22 pounds of **** raising fun! saving my pennies!

Yeah, I can't wait for that to come out. Would be even better if you could get a registered sear and go full 'rock-and-roll' with that, since the recoil is so light, compared to other .308's.

I just wish I had the cash to buy it. For that much, I'd be more willing to go get another gun.

meatloaf · 07-03-2007, 06:28 PM

full auto with a hundred rounds would be a blast! maybe oneday i can fire a fullauto rifle. (sigh. just once)

BFRANKlin · 08-05-2007, 10:55 PM

Hey! cheaperthandirt.com ~ CETME/G3/91 30 rd. steel mags-$11.97+s&h

toolman · 08-05-2007, 11:45 PM

FWIW, Century bought all of FAC's remaining inventory and they have a ton of CETME parts. I don't know about mags, but they I did spot brand new barrels for less than $60, too bad I didn't buy a CETME when the were going for $300.

06-17-2007, 12:36 AM	#1
meatloaf Senior Member Join Date: Jun 2007 Location: lakewood CO Posts: 863 Trader Rating: (0)	30 round clip for cetme I have veard of thirty round mags for cetme. does any one know where i can get one, or two,or more? (lol) and is there any thing out there that can hold more for my cetme?

06-17-2007, 05:59 AM	#2
Big Dog Moderator Join Date: Mar 2002 Location: Tallahassee, Florida Posts: 10,063 Trader Rating: (0)	There are three choices . . . 1) Original CETME steel thirty rounder - rare but they are out there, I have one. 2) HK thirty rounder - they are more available. Should work okay. 3) Cobbled-together out of two twenty-rounders welded up. Poor reputation - stay clear of these! __________________ Moderator of: AR15/M16, M14/M1A, New/Beginning Shooters and Militaria/Collectables.

06-19-2007, 12:00 AM	#5
sean46953 Senior Member Join Date: Jun 2007 Location: Marion, Indiana Posts: 357 Trader Rating: (0)	HEY! Don't pay $65 for that one at Florida Gun Works man! I found one for an HK at $24! Atlantic firearms - AR15 & AK47 rifles - Olympic arms at wholesale prices. Look at that page, you'll see it man. It's one for an HK, but from what I've read, it should work. You may have to "fit" it a bit, but if it doesn't fit right up, you could just sell it. It's your call though. Hope this helps! Sean M. Hartman Last edited by sean46953; 06-19-2007 at 12:03 AM.

06-26-2007, 10:06 PM	#6
rocketmonty Senior Member Join Date: Jun 2007 Location: florida Posts: 137 Trader Rating: (0)	have a few 30rd and 1 50,ill post picture later. plus still have one receiver in the white . Last edited by rocketmonty; 06-26-2007 at 10:18 PM.

08-05-2007, 11:45 PM	#11
toolman Mr. Fixit Join Date: Apr 2002 Location: abilene,tx Posts: 5,354 Trader Rating: (0)	FWIW, Century bought all of FAC's remaining inventory and they have a ton of CETME parts. I don't know about mags, but they I did spot brand new barrels for less than $60, too bad I didn't buy a CETME when the were going for $300. __________________ Don't be messin' with my gun!

06-17-2007, 03:49 PM	#3
sean46953 Senior Member Join Date: Jun 2007 Location: Marion, Indiana Posts: 357 Trader Rating: (0)	Yeah, the CETME 30 rounders are hard to find and expensive when you do find them, but there's one at Floridagunworks.com for $65. Here's the link to it Cetme Factory 30rnd Magazine**RARE --Florida GunWorks - Parts for the AR15, AK47, FNFAL, HK, Mini 14, Mini 30 & MP5 at Florida Gun Works Hope that helps Sean M. Hartman

06-18-2007, 07:47 PM	#4
meatloaf Senior Member Join Date: Jun 2007 Location: lakewood CO Posts: 863 Trader Rating: (0)	Big dog you are right, thirty round mags are exspensive! Cost more than they seem to be worth, I think I'll stick to the twenty round mags. After all I could buy three steel cetme mags or a ton of HK alluminum mags. Thanks for everyones input.

06-30-2007, 02:53 AM	#7
meatloaf Senior Member Join Date: Jun 2007 Location: lakewood CO Posts: 863 Trader Rating: (0)	Beta company is building a onehundred round c-mag, it will weigh ten pounds when fully loaded. No price yet on it but it will probably be 300+, its supposed to be released in august. Thats going to make for 22 pounds of **** raising fun! saving my pennies!

07-03-2007, 06:28 PM	#9
meatloaf Senior Member Join Date: Jun 2007 Location: lakewood CO Posts: 863 Trader Rating: (0)	full auto with a hundred rounds would be a blast! maybe oneday i can fire a fullauto rifle. (sigh. just once)

08-05-2007, 10:55 PM	#10
BFRANKlin Banned Join Date: Dec 2006 Location: Southern Ohio Posts: 258 Trader Rating: (0)	Hey! cheaperthandirt.com ~ CETME/G3/91 30 rd. steel mags-$11.97+s&h