M14se Crazy Horse® Lite

Rex Kramer · 09-06-2007, 05:54 PM

I recently commissioned Ron Smith @ SEI to build a LITE version of his world famous
M14SE Crazy Horse SDM on a pair of Poly Tech receivers I had sitting in the safe.

I am very, very happy with the results

Additional pictures and details are available HERE

Colt · 09-07-2007, 11:46 PM

Very nice.....did you get the trigger job done, i was thinking about having a smith trigger job instaled on my m1a!

Rex Kramer · 09-08-2007, 08:44 AM

Quote:

Originally Posted by Colt

Very nice.....did you get the trigger job done, i was thinking about having a smith trigger job installed on my m1a!

Thanks!
Yes, I had SEI perform their Sniper/Designated Marksman 4.5 lb Trigger Conversion on my ChiCom trigger groups.
They are equal to the two USGI TRW groups I have with the same conversion. Money well spent.

Colt · 09-08-2007, 07:43 PM

Do they also take the slack out?

Rex Kramer · 09-08-2007, 08:07 PM

Quote:

Originally Posted by Colt

Do they also take the slack out?

Yes sir!

Colt · 09-09-2007, 02:22 PM

Thanks, Got another question...took my M1A apart to clean it and weint to put my trigger assembly back in and it WONT FIT it came out fine and i've done it before!! dont know whats wrong it's like the little part that slids into the slot sticks out to far!
Thanks,

Rex Kramer · 09-09-2007, 03:14 PM

Remove the action from the stock and re install it making sure everything
is lined up and that the heel of the receiver is flush with the stock.
Make sure the trigger is not set and and no pins have shifted out of position.
Now carefully line it up and slide into place while holding the trigger guard up.
Lock the trigger guard down and check function.

That's how I do it ~ HTH.

Colt · 09-09-2007, 06:29 PM

Hey,
Thanks my dad helped me and we got it figured out it had some burrs on it! I took it to a friends and we were gona shoot the next day but we took it apart and painted the stock (i've got a new one ordered) i had to leave in the morining at six then return at ten when i got back he had assewmbeled it and he had no idea what he was doing, he pounded in the trigger assembly with a rubber mallet!!! I was so ticked!!! But my dad filied it down a little and it went in pretty good! Thanks though for everything! your like the only one on here that pays attention to this form i'm planning on getting Leatherwood scope then sending my trigger ass. to sei!! cant wait!

just_a_car · 09-09-2007, 08:22 PM

Quote:

Originally Posted by Colt

... your like the only one on here that pays attention to this form ...

Not true. I've watched this thread from initial posting... just didn't have anything to contribute, so didn't post.

Some people speak very little and only when they have something to say;
Some people speak a lot and have very little to say.

Colt · 09-16-2007, 07:59 PM

whats it cost to get one of those or that kit installed i'd like to get another one and do something like that also get one and but a bullpup stock..

Rex Kramer · 09-19-2007, 09:55 AM

Quote:

Originally Posted by Colt

whats it cost to get one of those or that kit installed i'd like to get another one and do something like that also get one and but a bullpup stock..

There are many variables to consider before you can nail down a price.
What parts are you going to supply? What parts and services is SEI going to supply?
What configuration do you want to end up with? What about optics?
Feel free to send me a private message if you want to go over some details.

I suggest you wait on the new stock from TROY if you want a Bull pup stock for the M14.
It should be available about the same time SHOT '08 opens.

09-06-2007, 05:54 PM	#1
Rex Kramer Senior Member Join Date: May 2005 Posts: 377 Trader Rating: (0)	M14se Crazy Horse® Lite I recently commissioned Ron Smith @ SEI to build a LITE version of his world famous M14SE Crazy Horse SDM on a pair of Poly Tech receivers I had sitting in the safe. I am very, very happy with the results Additional pictures and details are available HERE

09-07-2007, 11:46 PM	#2
Colt Senior Member Join Date: Aug 2006 Posts: 126 Trader Rating: (0)	Very nice.....did you get the trigger job done, i was thinking about having a smith trigger job instaled on my m1a!

09-08-2007, 07:43 PM	#4
Colt Senior Member Join Date: Aug 2006 Posts: 126 Trader Rating: (0)	Do they also take the slack out?

09-09-2007, 02:22 PM	#6
Colt Senior Member Join Date: Aug 2006 Posts: 126 Trader Rating: (0)	Thanks, Got another question...took my M1A apart to clean it and weint to put my trigger assembly back in and it WONT FIT it came out fine and i've done it before!! dont know whats wrong it's like the little part that slids into the slot sticks out to far! Thanks,

09-09-2007, 03:14 PM	#7
Rex Kramer Senior Member Join Date: May 2005 Posts: 377 Trader Rating: (0)	Remove the action from the stock and re install it making sure everything is lined up and that the heel of the receiver is flush with the stock. Make sure the trigger is not set and and no pins have shifted out of position. Now carefully line it up and slide into place while holding the trigger guard up. Lock the trigger guard down and check function. That's how I do it ~ HTH.

09-09-2007, 06:29 PM	#8
Colt Senior Member Join Date: Aug 2006 Posts: 126 Trader Rating: (0)	Hey, Thanks my dad helped me and we got it figured out it had some burrs on it! I took it to a friends and we were gona shoot the next day but we took it apart and painted the stock (i've got a new one ordered) i had to leave in the morining at six then return at ten when i got back he had assewmbeled it and he had no idea what he was doing, he pounded in the trigger assembly with a rubber mallet!!! I was so ticked!!! But my dad filied it down a little and it went in pretty good! Thanks though for everything! your like the only one on here that pays attention to this form i'm planning on getting Leatherwood scope then sending my trigger ass. to sei!! cant wait!

09-16-2007, 07:59 PM	#10
Colt Senior Member Join Date: Aug 2006 Posts: 126 Trader Rating: (0)	whats it cost to get one of those or that kit installed i'd like to get another one and do something like that also get one and but a bullpup stock..