Gun and Game Forums - View Single Post - Looking for Barrel Vise for FAL/L1A1 build

Mooseman684 · 09-12-2007, 11:58 PM

There is a guage you need for the locking shoulder, it is a stepped rod that inserts in the hole to get the measurement and be able to order the proper locking shoulder. My FAL barrel had flats on the chamber area so a large tight fitting wrench was all I used with the receiver clamped in a fixture in a vise.
Rich

09-12-2007, 11:58 PM	#4 (permalink)
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 8,919	There is a guage you need for the locking shoulder, it is a stepped rod that inserts in the hole to get the measurement and be able to order the proper locking shoulder. My FAL barrel had flats on the chamber area so a large tight fitting wrench was all I used with the receiver clamped in a fixture in a vise. Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!