View Single Post
Old 10-17-2007, 11:12 AM   #2
toolman
Senior Member
 
toolman's Avatar
 
Join Date: Apr 2002
Location: abilene,tx
Posts: 5,029
Blog Entries: 17
Hey guy, welcome to G&G! First off, I'd check to make sure the scope mount and rings are good and tight. I would resight it for 25 yds. then go to the 100 yd. range for the final sighting. Due to the arc of the bullet during flight, it should be fairly close at 25 and 100 yds. Another thing to keep in mind is your rest, are you shooting from any type of rest or sandbag? If so, make sure the forearm is on the front rest and not the barrel. Also don't rest directly off of a solid object as the gun will recoil away from it harder than a softer surface. Above all, try to be as consistent as possible with your rest, trigger control, and breathing. I shoot at the bottom of the natural breath cycle ie: after exhaling, before inhaling. If none of this works, try another scope, yours may have a "wandering zero". Good Luck and let us know how it goes.
__________________
Don't be messin' with my gun!
toolman is offline   Reply With Quote
 
[Output: 14.34 Kb. compressed to 13.72 Kb. by saving 0.62 Kb. (4.32%)]