advice on a crack on trigger

leadtag · 12-22-2007, 10:41 PM

617SH2C.jpgI have a taurus 617 snub nose,I just purchased 3 weeks ago from a sportmans wherehouse.I havent fired it yet,buthave just noticed a hairline crack about a 1/4 of an inch long on the trigger.I tried to attach a picture that I got off of the taurus website then draw in a crack at the location on the trigger,but may not work.I have the stainless version and not the titainium as seen in picture.Any advice or concerns?Thanks for any help.

leadtag · 12-22-2007, 10:45 PM

crack is not as heavy as seen in my edited example.

Mooseman684 · 12-22-2007, 10:49 PM

Take it back to Sportsmans warehouse...Show them!
Rich

jerry · 12-23-2007, 08:48 AM

Yes. Take the gun to have it evaluated. Anything that is bent, broken, buckled, distorted, cracked, out of tolerance or otherwise unserviceable should be corrected.

leadtag · 12-23-2007, 10:39 AM

Thanks guys, a no brainer I suppose!

Mooseman684 · 12-23-2007, 10:54 AM

Another Check mark on the "Why I hate Taurus Guns" !
Rich

Dale · 12-23-2007, 03:24 PM

I don't know how the Sportsman's Warehouse is where you are at but the one I "not so often go to anymore" will tell you to deal with Taurus.

lefty o · 12-23-2007, 03:32 PM

sportsmans whse will send the gun into taurus for you for warranty work. dont hesitate, take it in and have them send it out.

gandog56 · 12-25-2007, 09:10 PM

Quote:

Originally Posted by Mooseman684

Another Check mark on the "Why I hate Taurus Guns" !
Rich

Somehow I knew you would jump in on this. I can still say, my Taurus 66 is on it's 21st year, and still has not had a major problem.

Mooseman684 · 12-25-2007, 09:24 PM

Quote:

Originally Posted by gandog56

Somehow I knew you would jump in on this. I can still say, my Taurus 66 is on it's 21st year, and still has not had a major problem.

Well....All I can say is..."If the shoe fits."
Jose' fell asleep again during quality Control....
Rich

ouch · 12-26-2007, 07:58 AM

My wife has a Taurus 9mm pt 111. It had a trigger which became progressively worse. I field stripped it and couldn't find anything wrong so she took it to a well known Taurus gunsmith. He worked it over before finding a cracked sear. It went off to the Taurus Motherland in Miami and after 10 weeks it returned fixed. The trigger job had to be redone and it is now a very sweet shooting DAO pistol.

The smith said that when he talked to Taurus he was reading between the lines and apparently there is a silent recall on this weapon. They did make it right.

gandog56 · 01-22-2008, 07:25 PM

Silent recall? What good is that?

12-22-2007, 10:41 PM	#1
leadtag Registered User Join Date: Dec 2007 Posts: 3 Trader Rating: (0)	advice on a crack on trigger 617SH2C.jpgI have a taurus 617 snub nose,I just purchased 3 weeks ago from a sportmans wherehouse.I havent fired it yet,buthave just noticed a hairline crack about a 1/4 of an inch long on the trigger.I tried to attach a picture that I got off of the taurus website then draw in a crack at the location on the trigger,but may not work.I have the stainless version and not the titainium as seen in picture.Any advice or concerns?Thanks for any help.

12-22-2007, 10:49 PM	#3
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,055 Trader Rating: (0)	Take it back to Sportsmans warehouse...Show them! Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-23-2007, 08:48 AM	#4
jerry Senior Member Join Date: Mar 2002 Posts: 10,751 Trader Rating: (0)	Yes. Take the gun to have it evaluated. Anything that is bent, broken, buckled, distorted, cracked, out of tolerance or otherwise unserviceable should be corrected. __________________

12-23-2007, 10:54 AM	#6
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,055 Trader Rating: (0)	Another Check mark on the "Why I hate Taurus Guns" ! Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-23-2007, 03:24 PM	#7
Dale Senior Member Join Date: Mar 2002 Location: Too Dang Hot, Arizona Posts: 4,284 Trader Rating: (0)	I don't know how the Sportsman's Warehouse is where you are at but the one I "not so often go to anymore" will tell you to deal with Taurus. __________________ "It confuses me how some people can vigorously go against the 2nd. Amendment and still call themselves patriotic"-me

12-22-2007, 10:45 PM	#2
leadtag Registered User Join Date: Dec 2007 Posts: 3 Trader Rating: (0)	crack is not as heavy as seen in my edited example.

12-23-2007, 10:39 AM	#5
leadtag Registered User Join Date: Dec 2007 Posts: 3 Trader Rating: (0)	Thanks guys, a no brainer I suppose!

12-23-2007, 03:32 PM	#8
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,652 Trader Rating: (0)	sportsmans whse will send the gun into taurus for you for warranty work. dont hesitate, take it in and have them send it out.

12-26-2007, 07:58 AM	#11
ouch Senior Member Join Date: Nov 2007 Location: Ridgerun, Mo Posts: 184 Trader Rating: (0)	My wife has a Taurus 9mm pt 111. It had a trigger which became progressively worse. I field stripped it and couldn't find anything wrong so she took it to a well known Taurus gunsmith. He worked it over before finding a cracked sear. It went off to the Taurus Motherland in Miami and after 10 weeks it returned fixed. The trigger job had to be redone and it is now a very sweet shooting DAO pistol. The smith said that when he talked to Taurus he was reading between the lines and apparently there is a silent recall on this weapon. They did make it right.

01-22-2008, 07:25 PM	#12
gandog56 Senior Member Join Date: Oct 2006 Location: Montgomery, IL. Posts: 2,849 Trader Rating: (0)	Silent recall? What good is that?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode