Field Stripping the CZ 82

[ArkansasHunter]

Field Stripping Instructions

Figure 1

Step 1. Depress the magazine release and remove the magazine.

Figure 2

Step 2. With the pistol pointed in a safe direction pull back the slide and inspect the chamber to make certain the pistol is unloaded and safe to handle.

Figure 3

Step 3. Pull down on the front of the trigger guard until it opens with an audible click.

Figure 4

Step 4. Pull the slide all of the way back.

Figure 5

Step 5. Lift the slide up at the rear.

Figure 6

Step 6. Slide the slide forward.

Figure 7

Step 7. Remove the slide from the barrel.

Figure 8

Step 8. Remove the recoil spring. You have completed the field disassembly of the pistol.
Reassembly

Figure 9

Step 9. Replace the recoil spring.

Figure 10

Step 10. Place the end of the slide over the barrel as shown in Figure 10.

Figure 11

Step 11. Pull the slide all of the way back and and then set it on the rails. Let the slide move forward.

Figure 12

Step 12. Push up on the front of the trigger guard until it locks in place with an audible click.

Figure 13

Step 13. Insert magazine and lock in place.

[fred]

CZ-83 field strips exactly the same way. Great pictures!

[ArkansasHunter]

Thanks Fred

[Oppy]

ArkansasHunter - Great pics for new owners. Makes it look so easy, even a cave man can dot it. Which it is - cause I can. Great job.

Now, do you have helpful pics/hints for breakdown of my dreaded Ruger Mark 2 ???

[SilverRun]

I could have used this post about two weeks ago. Too late now man!

Just kidding - good pics. Shoud really help new owners.

[NRAJOE]

Very simple...like a Makarov but better....