Ruger #1

Broken Arrow · 02-02-2008, 03:56 PM

Been looking far and near for a new Ruger #1 in 308 starting in Dec. 07. No one seems to have them. Do they still make them? I have checked local dealers and searched the net. No luck. It is one of those things. You want it so bad you can taste it! but can't get your hands on it!!!

nathangdad · 02-02-2008, 07:43 PM

If you cannot locate this gun, I would suggest an ad in Shotgun News or similar venue.

billy · 02-02-2008, 08:20 PM

walmart
able ammo
midwest hunters outlet
guns america
i have found them for sale all over the web

i got 414,000 hits when i typed it in.

ouch · 02-02-2008, 09:39 PM

I picked up this #1.

It isnt in the same caliber but it shoots very good.

Billy, Walmart Oh come on!

texnmidwest · 02-02-2008, 09:47 PM

I found one at gander the other day. One was ruger #1a and the other was #1B in 22-250. They are out there but you may need to have the fun ordered for you. Great guns!

samuel · 02-02-2008, 10:03 PM

When I went to the ruger site they were there but they wouldnt give me info on the .308. sam.

SwedeSteve · 02-03-2008, 06:42 AM

There wa a #1 in .308 on Gunbroker a while back.

Broken Arrow · 02-03-2008, 10:22 AM

Thanks for the help!

I have checked the sites and Wall Mart. I had the same problem with the Ruger site. No info on the 308. Not that I would buy one from Wall Mart but they had no info either on the 308. The whole story is, my local gun shop has it on order. It is his distributor that seems to be dragging his feet. I got a really good deal on the gun and a Zeiss Conquest scope 3x9x40mm both for just a little under a grand. However, what good is the deal if you don’t get the merchandise? Thanks to you guys, I found several on the net. I’ll give em until about mid Feb. then go ahead and get it ordered.

Many thanks!

P.S

Slick gun Ouch! Them Rugers are just plain sexy?

rfc357 · 02-03-2008, 04:25 PM

Buy a used one in .30-06, have your gunsmith set back the barrel and re-chamber in .308. Cheaper than a new one, but the rib will have to go and you will have to drill and tap the barrel for a scope. I bought a #1 in .30-06 in like new condition last year at a pawn shop for $400. It had a Nikon scope.

Or just buy and shoot a .30-06. Anything a .308 will do, a .30-06 will do as well or better.

samuel · 02-03-2008, 05:10 PM

I just looked at one of mine and I dont think there is room to set the barrel back and drill and tap for the cantilever.Further,you would have to bore the freebore before you could use a .308 reamer.This sounds like a lot of gunsmithing.I could get a barrel in .308 stainless cheaper if I had to have .308. sam.

mym1a · 02-03-2008, 06:23 PM

i had a one in 45/70 another firearm i wish i didin't get rid of!!

texnmidwest · 02-03-2008, 07:03 PM

Not sure if you found the info you were looking for or if this will help. I have a feeling that you are looking for more info than what is on the site below. But below is a page from the ruger site. At least we know they still make them.
Ruger No. 1*Single Shot*Rifles

rfc357 · 02-03-2008, 08:38 PM

Sam,

I don't think the rib would go back on. That is why I recommended drilling and tapping for scope mounts. I probably wasn't clear enough about that. I have a #3 with Weaver bases on the barrel that work just fine.

A new barrel might be a better bet, considering the uneven quality of Ruger barrels.

02-02-2008, 07:43 PM	#2
nathangdad Senior Member Join Date: Nov 2007 Posts: 2,483	Shotgun News If you cannot locate this gun, I would suggest an ad in Shotgun News or similar venue.

02-02-2008, 09:47 PM	#5
texnmidwest Listen to yur Inner Hippo Join Date: Dec 2007 Location: South east Wisconsin Posts: 3,454	I found one at gander the other day. One was ruger #1a and the other was #1B in 22-250. They are out there but you may need to have the fun ordered for you. Great guns! __________________ "Quando Omni Flunkus Moritati" (If all else fails play dead)

02-03-2008, 06:42 AM	#7
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 10,372 Images: 1	There wa a #1 in .308 on Gunbroker a while back. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

02-03-2008, 07:03 PM	#12
texnmidwest Listen to yur Inner Hippo Join Date: Dec 2007 Location: South east Wisconsin Posts: 3,454	Not sure if you found the info you were looking for or if this will help. I have a feeling that you are looking for more info than what is on the site below. But below is a page from the ruger site. At least we know they still make them. Ruger No. 1Single ShotRifles __________________ "Quando Omni Flunkus Moritati" (If all else fails play dead)

02-02-2008, 03:56 PM	#1
Broken Arrow Member Join Date: Jan 2008 Posts: 19	Ruger #1 Been looking far and near for a new Ruger #1 in 308 starting in Dec. 07. No one seems to have them. Do they still make them? I have checked local dealers and searched the net. No luck. It is one of those things. You want it so bad you can taste it! but can't get your hands on it!!!

02-02-2008, 08:20 PM	#3
billy spiritual counselor Join Date: Jul 2006 Location: a secret lab on the shores of lake titicaca Posts: 12,164 Images: 9 Blog Entries: 146	walmart able ammo midwest hunters outlet guns america i have found them for sale all over the web i got 414,000 hits when i typed it in. __________________ Last edited by billy; 02-02-2008 at 08:21 PM. Reason: Automerged Doublepost

02-02-2008, 09:39 PM	#4
ouch Senior Member Join Date: Nov 2007 Location: Ridgerun, Mo Posts: 184	I picked up this #1. It isnt in the same caliber but it shoots very good. Billy, Walmart Oh come on!

02-02-2008, 10:03 PM	#6
samuel Senior Member Join Date: Dec 2006 Posts: 5,087	When I went to the ruger site they were there but they wouldnt give me info on the .308. sam.

02-03-2008, 10:22 AM	#8
Broken Arrow Member Join Date: Jan 2008 Posts: 19	Thanks for the help! I have checked the sites and Wall Mart. I had the same problem with the Ruger site. No info on the 308. Not that I would buy one from Wall Mart but they had no info either on the 308. The whole story is, my local gun shop has it on order. It is his distributor that seems to be dragging his feet. I got a really good deal on the gun and a Zeiss Conquest scope 3x9x40mm both for just a little under a grand. However, what good is the deal if you don’t get the merchandise? Thanks to you guys, I found several on the net. I’ll give em until about mid Feb. then go ahead and get it ordered. Many thanks! P.S Slick gun Ouch! Them Rugers are just plain sexy?

02-03-2008, 04:25 PM	#9
rfc357 Senior Member Join Date: Jun 2006 Posts: 741	Buy a used one in .30-06, have your gunsmith set back the barrel and re-chamber in .308. Cheaper than a new one, but the rib will have to go and you will have to drill and tap the barrel for a scope. I bought a #1 in .30-06 in like new condition last year at a pawn shop for $400. It had a Nikon scope. Or just buy and shoot a .30-06. Anything a .308 will do, a .30-06 will do as well or better.

02-03-2008, 05:10 PM	#10
samuel Senior Member Join Date: Dec 2006 Posts: 5,087	I just looked at one of mine and I dont think there is room to set the barrel back and drill and tap for the cantilever.Further,you would have to bore the freebore before you could use a .308 reamer.This sounds like a lot of gunsmithing.I could get a barrel in .308 stainless cheaper if I had to have .308. sam.

02-03-2008, 06:23 PM	#11
mym1a Senior Member Join Date: Jan 2008 Posts: 1,313	i had a one in 45/70 another firearm i wish i didin't get rid of!!

02-03-2008, 08:38 PM	#13
rfc357 Senior Member Join Date: Jun 2006 Posts: 741	Sam, I don't think the rib would go back on. That is why I recommended drilling and tapping for scope mounts. I probably wasn't clear enough about that. I have a #3 with Weaver bases on the barrel that work just fine. A new barrel might be a better bet, considering the uneven quality of Ruger barrels.