Need FEG 9MM P9RK Manual

tenfour · 01-07-2008, 03:35 PM

hey i inherited this gun and it works alright but it has been jamming a lot and i want to get in there and clean it up a bit and replace anything that is needed. but i need the manual so i dont mess anything up. ive looked everywhere on the web and i cannot find this manual so if anyone has this or knows a site where the would have i would really appreciate it. thanks!

mawe · 02-13-2008, 01:26 AM

Dear Reader,

Will you show me the sketch or drawing in how to dis assemble?

mawe

Dear Reader,RK

Will you show me the sketch or drawing in how to dis assemble the FEGP9RK?

chris barcelo · 05-29-2008, 10:22 PM

I dont know if this helps my friend, but this is how i do it with my feg P9R:
> remove the mag.
>unload the chamber and lock the slide.
now heres the crucial part (just try it though)
>pull the slide further all the way and push the slide catch. (if this does not work) use a small rubber mallet to hit the end of the slide catch gently enough to pop it out of the other end. Dont hit it hard just hit it enough to "pop" the slide catch. Once its out, well the rest just dismantles easily. When you return it latter, the first part you remove will be the last to go in. Better watch that decocker lever when you return the slide since it has the tendency to block the slide, kepping it from moving all the way back thus preventing you from inserting that stubborn slide catch again. Removing the slide catch is hard but pushing it back during assembly is of no problem. You might as well check your magazines if it seats you bullets properly (could be the cause of the jam), clean the barrel, the slide rails and the bushings. These guns are very reliable on the field, its my sidearm aside from the gov issued .45 auto (the brand i rather not mention) My feg has been with me for 6 years, the only time it jams was when it was coated with mud after 2 days in the rain and mud. But its a reliable gun. I am with the Phil Marines assigned in Basilan, Philippines. Hope I helped you with your problem regarding your feg.

01-07-2008, 03:35 PM	#1
tenfour Registered User Join Date: Jan 2008 Posts: 1 Trader Rating: (0)	Need FEG 9MM P9RK Manual hey i inherited this gun and it works alright but it has been jamming a lot and i want to get in there and clean it up a bit and replace anything that is needed. but i need the manual so i dont mess anything up. ive looked everywhere on the web and i cannot find this manual so if anyone has this or knows a site where the would have i would really appreciate it. thanks!

02-13-2008, 01:26 AM	#2
mawe Registered User Join Date: Feb 2008 Posts: 1 Trader Rating: (0)	Dear Reader, Will you show me the sketch or drawing in how to dis assemble? mawe Dear Reader,RK Will you show me the sketch or drawing in how to dis assemble the FEGP9RK? Last edited by mawe; 02-13-2008 at 01:28 AM. Reason: Automerged Doublepost

05-29-2008, 10:22 PM	#3
chris barcelo Registered User Join Date: May 2008 Posts: 4 Trader Rating: (0)	I dont know if this helps my friend, but this is how i do it with my feg P9R: > remove the mag. >unload the chamber and lock the slide. now heres the crucial part (just try it though) >pull the slide further all the way and push the slide catch. (if this does not work) use a small rubber mallet to hit the end of the slide catch gently enough to pop it out of the other end. Dont hit it hard just hit it enough to "pop" the slide catch. Once its out, well the rest just dismantles easily. When you return it latter, the first part you remove will be the last to go in. Better watch that decocker lever when you return the slide since it has the tendency to block the slide, kepping it from moving all the way back thus preventing you from inserting that stubborn slide catch again. Removing the slide catch is hard but pushing it back during assembly is of no problem. You might as well check your magazines if it seats you bullets properly (could be the cause of the jam), clean the barrel, the slide rails and the bushings. These guns are very reliable on the field, its my sidearm aside from the gov issued .45 auto (the brand i rather not mention) My feg has been with me for 6 years, the only time it jams was when it was coated with mud after 2 days in the rain and mud. But its a reliable gun. I am with the Phil Marines assigned in Basilan, Philippines. Hope I helped you with your problem regarding your feg.