270 WSM Disappointment

win39 · 02-26-2008, 11:19 AM

Well I finally was able to get to the range today and tried my 270 WSM with factory loads. Well it hated them, and it showed me by shooting nothing less that 4 inch groups. I was really disappointed because I wanted to shoot factory ammo for hunting next season. I was using Winchester 130 Gr. Ballistic Silver tips. I feel real confident that it was not me. So I guess it's to the loading bench.

AKHunter · 02-26-2008, 11:27 AM

I assume you checked your scope mounts ? Stock for warpage and so on, it may be a matter of ammo brand, bullet weight/manufacture etc. But dont let me disuade you from reloading, i sure enjoy it .

runfiverun · 02-26-2008, 02:31 PM

those short mags usually dont shoot well untill you are near or at max
i bought a 7 wsm and could shoot it okay but could find nothing but little problems
trigger sucked, barell rubbed the channel [both sides,alternately]
the oal it liked wouldn't fit in the mag. etc....

just went back to my push feed mod 70!

win39 · 02-26-2008, 03:13 PM

Thanks for the information. I have had the action glassed, barrel free floated, head space checked and corrected, and the barrel lapped. the scope bases and rings are secured. I always thought that the factory stuff was running close to max in the Short Mags. I have a load that I want to try but I was hoping that it would like the taste of the factory stuff. It might settle down after the barrel is a little more seasoned.

lefty o · 02-26-2008, 07:31 PM

give federal power shok 130gr a try. my 270WSM featherweight has grouped in the .330"s with this ammo. no guarantee yours will, but worth a try.

win39 · 02-26-2008, 08:23 PM

Quote:

Originally Posted by lefty o

give federal power shok 130gr a try. my 270WSM featherweight has grouped in the .330"s with this ammo. no guarantee yours will, but worth a try.

Thanks: I will give them a try. I might try to work up a load first. I don't know why I am so set on using factory loads, they have never worked out for me.

BRIANK · 02-29-2008, 08:19 PM

WIN 39 MY Win short mag dont like nothing but remington premer ammo give it a try

SwedeSteve · 02-29-2008, 11:36 PM

Reload 5 rounds at 10gr under max, then 3 rds at +2gr intervals. Research the powder/grain combo first. If you don't tighten up, then switch powders.You should find a recipe she likes.

GlockMeister · 03-01-2008, 12:40 AM

I don't have a bolt action rifle, yet. lol It is however, on my ever growing "wish list". I'm learning and I learn more and more by reading on this forum and asking questions. This reply is both asking questions to learn and help myself, and at the same time, ask win39 some questions and in the end, maybe we can both learn something and he can get his current problem figured out. So with that said... In watching "sSighting in with Shooting USA a while back, they'd built a tack driver. New barrel, you know. Anyhow, in that episode, John Scoutten said before he could get an accurate grouping, the barrel needed to be broken in.

If it's a new rifle, does the same thin apply with new rifles? Where the barrel needs to be broken in? Also, who mounted the scope on, you a dealer, or did it come with them on it? Are the rings aligned properly? Are they grabbing the scope evenly, properly? I've read where if the rings don't grab the scope properly or evenly, it can affect the scope and it's accuracy.
So please forgive any ignorance or any dumb question. I in no way am trying to hi-jack win39s post. I'm just trying to learn. I see no sense in starting another thread/post to ask this or any other question/s if it can be answered in an already existing thread. Why take up server space when it can be done here, where I can relate it to what it is that's making me think of or have to ask the question.

Thanks much in advance. Win39, have you had any progress?

win39 · 03-01-2008, 06:31 AM

Thanks everyone. I will try most of the suggestions when the weather breaks. GlockMeister you can ask questions and make suggestions any time you like. I start a lot of these threads to have a topic to discuss. This is how I get a lot of new suggestions and updated information. I just like talking guns to people that enjoy the same sport I do. There are no dumb questions.

02-26-2008, 11:19 AM	#1
win39 Senior Member Join Date: Jan 2008 Posts: 201 Trader Rating: (0)	270 WSM Disappointment Well I finally was able to get to the range today and tried my 270 WSM with factory loads. Well it hated them, and it showed me by shooting nothing less that 4 inch groups. I was really disappointed because I wanted to shoot factory ammo for hunting next season. I was using Winchester 130 Gr. Ballistic Silver tips. I feel real confident that it was not me. So I guess it's to the loading bench. __________________ Benny

02-26-2008, 03:13 PM	#4
win39 Senior Member Join Date: Jan 2008 Posts: 201 Trader Rating: (0)	Thanks for the information. I have had the action glassed, barrel free floated, head space checked and corrected, and the barrel lapped. the scope bases and rings are secured. I always thought that the factory stuff was running close to max in the Short Mags. I have a load that I want to try but I was hoping that it would like the taste of the factory stuff. It might settle down after the barrel is a little more seasoned. __________________ Benny

02-29-2008, 11:36 PM	#8
SwedeSteve Grumpy Old Fart Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 9,133 Trader Rating: (0)	Reload 5 rounds at 10gr under max, then 3 rds at +2gr intervals. Research the powder/grain combo first. If you don't tighten up, then switch powders.You should find a recipe she likes. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-01-2008, 12:40 AM	#9
GlockMeister Senior Member Join Date: Dec 2007 Location: Northern Illinois Posts: 4,937 Trader Rating: (0)	I don't have a bolt action rifle, yet. lol It is however, on my ever growing "wish list". I'm learning and I learn more and more by reading on this forum and asking questions. This reply is both asking questions to learn and help myself, and at the same time, ask win39 some questions and in the end, maybe we can both learn something and he can get his current problem figured out. So with that said... In watching "sSighting in with Shooting USA a while back, they'd built a tack driver. New barrel, you know. Anyhow, in that episode, John Scoutten said before he could get an accurate grouping, the barrel needed to be broken in. If it's a new rifle, does the same thin apply with new rifles? Where the barrel needs to be broken in? Also, who mounted the scope on, you a dealer, or did it come with them on it? Are the rings aligned properly? Are they grabbing the scope evenly, properly? I've read where if the rings don't grab the scope properly or evenly, it can affect the scope and it's accuracy. So please forgive any ignorance or any dumb question. I in no way am trying to hi-jack win39s post. I'm just trying to learn. I see no sense in starting another thread/post to ask this or any other question/s if it can be answered in an already existing thread. Why take up server space when it can be done here, where I can relate it to what it is that's making me think of or have to ask the question. Thanks much in advance. Win39, have you had any progress? __________________ I'd rather be tried by 12 than carried by 6! Last edited by GlockMeister; 03-01-2008 at 12:50 AM.

03-01-2008, 06:31 AM	#10
win39 Senior Member Join Date: Jan 2008 Posts: 201 Trader Rating: (0)	Thanks everyone. I will try most of the suggestions when the weather breaks. GlockMeister you can ask questions and make suggestions any time you like. I start a lot of these threads to have a topic to discuss. This is how I get a lot of new suggestions and updated information. I just like talking guns to people that enjoy the same sport I do. There are no dumb questions. __________________ Benny

02-26-2008, 11:27 AM	#2
AKHunter Senior Member Join Date: Feb 2008 Location: Alaska Posts: 904 Trader Rating: (0)	I assume you checked your scope mounts ? Stock for warpage and so on, it may be a matter of ammo brand, bullet weight/manufacture etc. But dont let me disuade you from reloading, i sure enjoy it .

02-26-2008, 02:31 PM	#3
runfiverun Senior Member Join Date: Jan 2008 Location: soda springs idaho Posts: 241 Trader Rating: (0)	those short mags usually dont shoot well untill you are near or at max i bought a 7 wsm and could shoot it okay but could find nothing but little problems trigger sucked, barell rubbed the channel [both sides,alternately] the oal it liked wouldn't fit in the mag. etc.... just went back to my push feed mod 70!

02-26-2008, 07:31 PM	#5
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,692 Trader Rating: (0)	give federal power shok 130gr a try. my 270WSM featherweight has grouped in the .330"s with this ammo. no guarantee yours will, but worth a try.

02-29-2008, 08:19 PM	#7
BRIANK Registered User Join Date: Feb 2008 Posts: 2 Trader Rating: (0)	WIN 39 MY Win short mag dont like nothing but remington premer ammo give it a try