G kit build help..FCG's? Parts?

sickwitems · 03-05-2008, 01:27 AM

I've read that the G2's from Tapco don't get along with the NDS-3 receivers so much. I have 2 Tapco's and 2 Century's. From what I've heard the Century's are crap...I picked them up for $10 a piece at a gun show last week so, whatever.
What type of FCG would a guy use other than the $85 adjustable triggers? I don't know what FCG's work with (X)-receivers and so on. I want a decent FCG's for ALL my AK's!
I have 8 kits to build and don't want to break my wallet on FCG's! The receivers ALONE would be $600 shipped if i used the NDS-3's which I hear are superior in quality, any suggestions on receivers? The FFL transfer is $20 a piece, i need to avoid that somehow.
THEN, on top of all that i need to get parts, parts, and more parts!!! I don't want any of them to look the same. I'm having trouble finding no-so-costly furniture, but that is expected. This is starting to get expensive...LOL!

mike63 · 03-05-2008, 02:02 PM

Its only there single hook trigger that there is a problem with, according to there web site. I take this to mean the double hook would work fine.
page2
___________________________________

Our Best Seller: NDS-3 "economy" AKM receiver

It does not have some of the finer details of our premium AKM and AK74 receivers, but is made to the same high standards. Like the rest of our products it is FULLY heat treated 4130 to 40 on the Rockwell "C" scale.

Some of the features it DOES NOT HAVE are:

top rail step-down
laser-cut holes to eliminate stretch at trigger pin hole

CUSTOM SERIAL #s NOT AVAILABLE ON NDS-3 !!!!!!!

THINGS IT DOES HAVE:

pre-drilled rivet holes for Romanian / Hungarian fixed stock kits
fully heat treated 4130 steel
"S" and "F" selector markings
"X" and "Y" marks at hammer/trigger holes
competitively priced with ground UPS shipping included
left lower rail mag guide added

NDS-3 "economy" AKM

Qty 1-10: $55 shipped 11-20: $53 shipped 21+: $50 shipped

Status: in stock/ready to ship

You can only combine receivers for quantity discounts if they have the same qty 1 price
If you send incorrect payment, your order will be held until full payment is received.
We don't recommend the use of the Tapco G2 "single hook" trigger in the NDS-3.
There have been reports of malfunctions when used in this receiver. This only applies to the NDS-3 "economy" receiver

03-05-2008, 01:27 AM	#1
sickwitems Senior Member Join Date: Mar 2006 Location: Fargo "A" Posts: 117	G kit build help..FCG's? Parts? I've read that the G2's from Tapco don't get along with the NDS-3 receivers so much. I have 2 Tapco's and 2 Century's. From what I've heard the Century's are crap...I picked them up for $10 a piece at a gun show last week so, whatever. What type of FCG would a guy use other than the $85 adjustable triggers? I don't know what FCG's work with (X)-receivers and so on. I want a decent FCG's for ALL my AK's! I have 8 kits to build and don't want to break my wallet on FCG's! The receivers ALONE would be $600 shipped if i used the NDS-3's which I hear are superior in quality, any suggestions on receivers? The FFL transfer is $20 a piece, i need to avoid that somehow. THEN, on top of all that i need to get parts, parts, and more parts!!! I don't want any of them to look the same. I'm having trouble finding no-so-costly furniture, but that is expected. This is starting to get expensive...LOL! Last edited by sickwitems; 03-05-2008 at 01:29 AM.

03-05-2008, 02:02 PM	#2
mike63 Senior Member Join Date: Jun 2007 Location: Philadelphia, MS. Posts: 338	Its only there single hook trigger that there is a problem with, according to there web site. I take this to mean the double hook would work fine. page2 ___________________________________ Our Best Seller: NDS-3 "economy" AKM receiver It does not have some of the finer details of our premium AKM and AK74 receivers, but is made to the same high standards. Like the rest of our products it is FULLY heat treated 4130 to 40 on the Rockwell "C" scale. Some of the features it DOES NOT HAVE are: top rail step-down laser-cut holes to eliminate stretch at trigger pin hole CUSTOM SERIAL #s NOT AVAILABLE ON NDS-3 !!!!!!! THINGS IT DOES HAVE: pre-drilled rivet holes for Romanian / Hungarian fixed stock kits fully heat treated 4130 steel "S" and "F" selector markings "X" and "Y" marks at hammer/trigger holes competitively priced with ground UPS shipping included left lower rail mag guide added NDS-3 "economy" AKM Qty 1-10: $55 shipped 11-20: $53 shipped 21+: $50 shipped Status: in stock/ready to ship You can only combine receivers for quantity discounts if they have the same qty 1 price If you send incorrect payment, your order will be held until full payment is received. We don't recommend the use of the Tapco G2 "single hook" trigger in the NDS-3. There have been reports of malfunctions when used in this receiver. This only applies to the NDS-3 "economy" receiver __________________ Do it today, tomorrow it may be illegal. Last edited by mike63; 03-05-2008 at 02:06 PM.