stocks

marion57 · 03-07-2008, 06:35 PM

Does anyone know if yugo stocks fit all SKS or just certain ones like russain or norinco???

jmp8927 · 03-07-2008, 07:48 PM

So far as I know, Yugo is interchangeable with everything except Albanian. As you know SKS stocks are sold for SKS in general. I've never seen one specially made for a specific kind of SKS(unless maybe the Albanian but I've never seen an aftermarket stock for one of those). I figure since aftermarket stocks will fit them all, the originals should also fit them all.

marion57 · 03-07-2008, 08:24 PM

Thanx am looking at a couple of stock SKS stocks to refinish so wanted to make sure they will fit most models
Thanks
Marion

SwedeSteve · 03-07-2008, 09:12 PM

Isn't there a dif between bayo grooves on the stocks? Knife vs cruciform?

jmp8927 · 03-07-2008, 10:51 PM

YES THERE IS! Thanks Swede! I forgot about that. The blade groover is skinnier and deeper than the spike groove. If you buy a stock made for a spike, you will have to make it deeper probably. If you buy one made for a blade and you have a spike(as I did because the place I bought it from decided to list the spike cutout stocks a few days AFTER I ordered...) you'll have to make the groove wider. I did this with the gunsmith's dreaded DREMAL TOOL! lol but it worked really well! Turns out the drum I used was the right width for the spike. So yeah. Lookout for which stock you buy and make sure you get one that corresponds to your bayonet(providing you have one)

marion57 · 03-08-2008, 01:24 AM

Thanks guys!!

SwedeSteve · 03-08-2008, 05:23 AM

Which type of stock are you looking for Marion?

03-07-2008, 06:35 PM	#1
marion57 Senior Member Join Date: Dec 2007 Location: Missouri Posts: 2,863	stocks Does anyone know if yugo stocks fit all SKS or just certain ones like russain or norinco???

03-07-2008, 07:48 PM	#2
jmp8927 Senior Member Join Date: Nov 2007 Location: Walterboro, SC Posts: 1,136 Images: 15	So far as I know, Yugo is interchangeable with everything except Albanian. As you know SKS stocks are sold for SKS in general. I've never seen one specially made for a specific kind of SKS(unless maybe the Albanian but I've never seen an aftermarket stock for one of those). I figure since aftermarket stocks will fit them all, the originals should also fit them all. __________________ Doing the unexpected makes the unexpected the expected and thus the expected becomes the unexpected.

03-07-2008, 09:12 PM	#4
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,261 Images: 1	Isn't there a dif between bayo grooves on the stocks? Knife vs cruciform? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-07-2008, 10:51 PM	#5
jmp8927 Senior Member Join Date: Nov 2007 Location: Walterboro, SC Posts: 1,136 Images: 15	YES THERE IS! Thanks Swede! I forgot about that. The blade groover is skinnier and deeper than the spike groove. If you buy a stock made for a spike, you will have to make it deeper probably. If you buy one made for a blade and you have a spike(as I did because the place I bought it from decided to list the spike cutout stocks a few days AFTER I ordered...) you'll have to make the groove wider. I did this with the gunsmith's dreaded DREMAL TOOL! lol but it worked really well! Turns out the drum I used was the right width for the spike. So yeah. Lookout for which stock you buy and make sure you get one that corresponds to your bayonet(providing you have one) __________________ Doing the unexpected makes the unexpected the expected and thus the expected becomes the unexpected.

03-08-2008, 05:23 AM	#7
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,261 Images: 1	Which type of stock are you looking for Marion? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-07-2008, 08:24 PM	#3
marion57 Senior Member Join Date: Dec 2007 Location: Missouri Posts: 2,863	Thanx am looking at a couple of stock SKS stocks to refinish so wanted to make sure they will fit most models Thanks Marion

03-08-2008, 01:24 AM	#6
marion57 Senior Member Join Date: Dec 2007 Location: Missouri Posts: 2,863	Thanks guys!!