pa-63 parts help

mustang · 10-21-2006, 12:53 PM

Help guys.
I have a pa-63 and due to my mistake I lost the extractor, extractor plunger and the extractor spring. Obviously these are important parts and I cant find them anywhere.
Numrich has the same parts for a Kassnar pmk and I heard they would interchange but NO Joy. They are close but not right.
Anybody know where I could find the right parts?
I love this little gun I just need to get theese parts back in it so I can use it again.
Thanks for the help.

DANA · 10-21-2006, 08:05 PM

You could try Jack First

DANA

mustang · 10-21-2006, 09:40 PM

Jack First Gun Shop

I assume this is who you are talking about. He will be first on my list to call monday morning. Or since I am in eastern time and he is in moutnain time I will have to wait a little while to call. Thanks for the info. If any body else has an idea I am still open.

I tried them today and they dont have anything. Any other ideas?

ezmedic · 12-29-2006, 11:07 PM

Same thing, same problem. Have you had any luck yet? I have emailed FEG, we'll see.

mkubes · 02-03-2008, 08:01 AM

Parts for the Hungarian PA-63 Pistol are Available at Buymilsurp.com, Your source for military surplus.

dgray64 · 02-10-2008, 03:02 PM

Quote:

Originally Posted by mustang

Help guys.
I have a pa-63 and due to my mistake I lost the extractor, extractor plunger and the extractor spring. Obviously these are important parts and I cant find them anywhere.
Numrich has the same parts for a Kassnar pmk and I heard they would interchange but NO Joy. They are close but not right.
Anybody know where I could find the right parts?
I love this little gun I just need to get theese parts back in it so I can use it again.
Thanks for the help.

Don't feel bad, I did the same thing while replacing my firing pin spring. Small parts aren't they? I tried Numerich too, but they weren't quite right. Go here and get them. They are fast and not expensive:

http://www.ssmedwi.com/Pistols%20page%202.htm

By the way, they are really tough to install. Get your slide braced well and use small screw driver (in my case a nut pick worked best) to pry the spring and extender back while you slip the extracter in place. The first couple of times will make you want to throw it ... after you finde the spring and rod again, but the final time you will be surprised and say, "Wow, that was easy!" Good luck. By the way, the pistol shoots without the extractor very well, but the darn decocker keeps drooping.

Dave

Dave

joseph whitney · 03-05-2008, 04:40 PM

where can I get a manual for a FEG PA63?

Cyrano · 03-05-2008, 05:25 PM

You can get one for $5 right now on eBay. Here is the link:

FEG PA-63 Owner/ Operators Manual - eBay (item 230229254869 end time Mar-12-08 00:55:27 PDT)

joseph whitney · 03-06-2008, 10:28 AM

Thanks Cyrano for your help

MOCKBA · 03-13-2008, 08:15 AM

Numrich also has perts for the Interarms PPH, which as far as I can tell is exactly the same as the PA-63 with the difference being the barrel. You should be able to use any part from the interarms PPH at numrich.

Rollinco · 03-13-2008, 08:51 AM

I just ordered the same parts from buymilsurp.com and they are on the way to me. They had a few left when I ordered. Hope this helps!!

10-21-2006, 12:53 PM	#1
mustang Registered User Join Date: Oct 2006 Posts: 2	pa-63 parts help Help guys. I have a pa-63 and due to my mistake I lost the extractor, extractor plunger and the extractor spring. Obviously these are important parts and I cant find them anywhere. Numrich has the same parts for a Kassnar pmk and I heard they would interchange but NO Joy. They are close but not right. Anybody know where I could find the right parts? I love this little gun I just need to get theese parts back in it so I can use it again. Thanks for the help.

10-21-2006, 09:40 PM	#3
mustang Registered User Join Date: Oct 2006 Posts: 2	Jack First Gun Shop I assume this is who you are talking about. He will be first on my list to call monday morning. Or since I am in eastern time and he is in moutnain time I will have to wait a little while to call. Thanks for the info. If any body else has an idea I am still open. I tried them today and they dont have anything. Any other ideas? Last edited by mustang; 10-23-2006 at 04:58 PM.

03-06-2008, 10:28 AM	#9
joseph whitney Member Join Date: Mar 2008 Location: Utah Posts: 19	PA-63 manual Thanks Cyrano for your help

10-21-2006, 08:05 PM	#2
DANA Senior Member Join Date: Mar 2002 Location: WAITSFIELD VERMONT Posts: 1,605	You could try Jack First DANA

12-29-2006, 11:07 PM	#4
ezmedic Registered User Join Date: Dec 2006 Posts: 1	Same thing, same problem. Have you had any luck yet? I have emailed FEG, we'll see.

02-03-2008, 08:01 AM	#5
mkubes Registered User Join Date: Feb 2008 Posts: 1	Parts for the Hungarian PA-63 Pistol are Available at Buymilsurp.com, Your source for military surplus.

03-05-2008, 04:40 PM	#7
joseph whitney Member Join Date: Mar 2008 Location: Utah Posts: 19	where can I get a manual for a FEG PA63?

03-05-2008, 05:25 PM	#8
Cyrano Senior Member Join Date: Oct 2007 Location: New York Posts: 3,032	You can get one for $5 right now on eBay. Here is the link: FEG PA-63 Owner/ Operators Manual - eBay (item 230229254869 end time Mar-12-08 00:55:27 PDT)

03-13-2008, 08:15 AM	#10
MOCKBA Member Join Date: Feb 2008 Location: Somewhere Posts: 16	Numrich also has perts for the Interarms PPH, which as far as I can tell is exactly the same as the PA-63 with the difference being the barrel. You should be able to use any part from the interarms PPH at numrich.

03-13-2008, 08:51 AM	#11
Rollinco Registered User Join Date: Feb 2008 Location: Monmouth, Oregon Posts: 6	I just ordered the same parts from buymilsurp.com and they are on the way to me. They had a few left when I ordered. Hope this helps!!