Scout M44 Transformation - Page 2

SwedeSteve · 03-15-2008, 12:25 AM

I agree 100%. Most of the enjoyment is in the doing! I spent $1400 buildng an awesome AK. Now I want to sell it and start all over. The PROCESS sometimes outweighs the end result! Will I see my $1400 back? NO! Will I do it again? Most assuredley YES...

GlockMeister · 03-15-2008, 12:35 AM

What's the eye relief on that scope? So far so good. Just be careful with that Dremel if that's the route you end up having to take; then again, I've never seen a sawed off Mosin. lol

texnmidwest · 03-15-2008, 07:38 AM

A mosin pistol? Hmmmm, that would make the liberals faint! Cut the barrel down. Cut the stock off at the pistol grip....

marion57 · 03-15-2008, 07:56 AM

Quote:

Originally Posted by SwedeSteve

I agree 100%. Most of the enjoyment is in the doing! I spent $1400 buildng an awesome AK. Now I want to sell it and start all over. The PROCESS sometimes outweighs the end result! Will I see my $1400 back? NO! Will I do it again? Most assuredley YES...

Dang 1400?? I just knew I shoulda moved to alaska long time ago!!
NAAAAAAAAAAAAAAAAAAAAAAA

just_a_car · 03-15-2008, 08:32 AM

Quote:

Originally Posted by texnmidwest

A mosin pistol? Hmmmm, that would make the liberals faint! Cut the barrel down. Cut the stock off at the pistol grip....

It's already been done: http://www.gunandgame.com/forums/mos...tol-obrez.html (mosin nagant pistol "obrez"?)

SwedeSteve · 03-15-2008, 09:18 AM

Marion- It took me 6 months to build it part by part! But it sure was fun!

thebluesbox · 03-15-2008, 10:26 AM

Quote:

Originally Posted by blue109

wow. you didnt get bashed for posting a pic of a scouted mosin!! very nice. my only observation is that the scope mount you used looks to be one of the ebay style ones. they have a tendancy to loose zero on a regular basis. there is a guy on the mosin boards going by the name M39SCOUT who makes custom mounts just like that but with side supports. ive had mine on for a few hundred rounds and its rock solid. something to think about if you have trouble staying on target. otherwise it looks sweet.

On russian-mosin forums.... I got fussed at and thread locked for posting that I rubbed my stock with butcher block oil??????????
and then Im here, seems like a much better place to be, those guys are a bunch of quacks!!

R5CYA · 03-15-2008, 10:30 AM

lol! and thier panties are still in a twist!

SwedeSteve · 03-15-2008, 11:20 AM

Just chalk it up to experience and drive on!

marion57 · 03-15-2008, 12:46 PM

Quote:

Originally Posted by SwedeSteve

Marion- It took me 6 months to build it part by part! But it sure was fun!

Yepper am having fun with this little refinshing job myself nothing as elaborate as your doing tho ..
just gonna make a nice looking 91x30 from a old stock .. got the SKS out and stripping it now .. waiting on the guy in texas to decide if he is gonna take the stock I ordered back of pay the difference for the for arm stock being broke .. BTW do you know how to remove the gas tube from this yugo? I cant see a pin in the rear section just a dimple on each side???

texnmidwest · 03-15-2008, 04:50 PM

Quote:

Originally Posted by just_a_car

It's already been done: http://www.gunandgame.com/forums/mos...tol-obrez.html (mosin nagant pistol "obrez"?)

Man, Could you imagine the recoil that darn thing had! Wrist breaker extraordinare!

SwedeSteve · 03-15-2008, 06:00 PM

Marion- Hope this helps. I do not know much about the Yugo's!
Both ends are flattened after install. They are ground flush with the U shaped part. The problem with that is it makes both sides the rivet head. The way I have done it is to drill the darned pin out on a drill press, then use a roll pin to replace it. after the roll pin is installed, dremel off the excess and you are done.

If you do not want to go that route, I do suggest using a dremel wit a cutoff wheel to remove the excess head on one side of the pin, then proceed to push it out from that side. That way you are sure you are not trying to fight the rivet style head. It will not at all damage the unit doing it this way..

just_a_car · 03-15-2008, 06:17 PM

Quote:

Originally Posted by texnmidwest

Man, Could you imagine the recoil that darn thing had! Wrist breaker extraordinare!

Is it bad that I still want to take a POS Mosin that is nearly ready for the scrap heap and make an Obrez out of it?

...getting permission from the Gesta... er, I mean the BATFE, first to make a pistol out of a rifle.

R5CYA · 03-15-2008, 06:24 PM

gotta be better than a sawed 12 guage with a pistol grip. then again i haven't shot one but some people are man enough.

marion57 · 03-15-2008, 06:28 PM

Quote:

Originally Posted by SwedeSteve

Marion- Hope this helps. I do not know much about the Yugo's!
Both ends are flattened after install. They are ground flush with the U shaped part. The problem with that is it makes both sides the rivet head. The way I have done it is to drill the darned pin out on a drill press, then use a roll pin to replace it. after the roll pin is installed, dremel off the excess and you are done.

If you do not want to go that route, I do suggest using a dremel wit a cutoff wheel to remove the excess head on one side of the pin, then proceed to push it out from that side. That way you are sure you are not trying to fight the rivet style head. It will not at all damage the unit doing it this way..

I cheated swede I masked it off and stripped it LOL now am putting the tru oil on it

Thank swede I am kinda slow but I see now that what you say is true and am glad I didnt go to that extreme

SwedeSteve · 03-15-2008, 06:51 PM

Thats what I usually do! Lots and lots of blue tape. A pain, but better than risking damaging something!

rondog · 03-18-2008, 06:11 PM

So, is there a "kit" available with a scope and mount for the 91/30's? Something decent quality?

marion57 · 03-18-2008, 06:55 PM

Quote:

Originally Posted by SwedeSteve

Thats what I usually do! Lots and lots of blue tape. A pain, but better than risking damaging something!

Done and all back together swede!!

SwedeSteve · 03-19-2008, 12:29 PM

Marion-I picked up 2 M44 stocks for the price of one to play with.

Ellsworth · 03-22-2008, 02:37 PM

I got a m44 stock that someone can have if they want it, just send me the shipping price and address and i'll send it out, don't have the stock rings but I have the bottom and top wood.

03-15-2008, 12:35 AM	#22
GlockMeister Senior Member Join Date: Dec 2007 Location: Northern Illinois Posts: 4,739 Trader Rating: (0)	What's the eye relief on that scope? So far so good. Just be careful with that Dremel if that's the route you end up having to take; then again, I've never seen a sawed off Mosin. lol __________________ I'd rather be tried by 12 than carried by 6!

03-15-2008, 07:38 AM	#23
texnmidwest Senior Bear Fluffer Join Date: Dec 2007 Location: South east Wisconsin Posts: 2,895 Trader Rating: (0)	A mosin pistol? Hmmmm, that would make the liberals faint! Cut the barrel down. Cut the stock off at the pistol grip.... __________________ "Quando Omni Flunkus Moritati" (If all else fails play dead)

03-15-2008, 09:18 AM	#26
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 8,504 Trader Rating: (0)	Marion- It took me 6 months to build it part by part! But it sure was fun! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-15-2008, 11:20 AM	#29
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 8,504 Trader Rating: (0)	Just chalk it up to experience and drive on! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-15-2008, 06:00 PM	#32
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 8,504 Trader Rating: (0)	Marion- Hope this helps. I do not know much about the Yugo's! Both ends are flattened after install. They are ground flush with the U shaped part. The problem with that is it makes both sides the rivet head. The way I have done it is to drill the darned pin out on a drill press, then use a roll pin to replace it. after the roll pin is installed, dremel off the excess and you are done. If you do not want to go that route, I do suggest using a dremel wit a cutoff wheel to remove the excess head on one side of the pin, then proceed to push it out from that side. That way you are sure you are not trying to fight the rivet style head. It will not at all damage the unit doing it this way.. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-15-2008, 10:30 AM	#28
R5CYA Senior Member Join Date: Feb 2008 Location: San Bruno, Republic of Kalifornia Posts: 397 Trader Rating: (0)	lol! and thier panties are still in a twist!

03-15-2008, 06:24 PM	#34
R5CYA Senior Member Join Date: Feb 2008 Location: San Bruno, Republic of Kalifornia Posts: 397 Trader Rating: (0)	gotta be better than a sawed 12 guage with a pistol grip. then again i haven't shot one but some people are man enough.

03-15-2008, 06:51 PM	#36
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 8,504 Trader Rating: (0)	Thats what I usually do! Lots and lots of blue tape. A pain, but better than risking damaging something! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-18-2008, 06:11 PM	#37
rondog Senior Member Join Date: Aug 2007 Location: Parker, CO Posts: 1,185 Trader Rating: (0)	So, is there a "kit" available with a scope and mount for the 91/30's? Something decent quality?

03-19-2008, 12:29 PM	#39
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 8,504 Trader Rating: (0)	Marion-I picked up 2 M44 stocks for the price of one to play with. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

03-22-2008, 02:37 PM	#40
Ellsworth Senior Member Join Date: Mar 2008 Location: Cheney, Washington Posts: 104 Trader Rating: (0)	I got a m44 stock that someone can have if they want it, just send me the shipping price and address and i'll send it out, don't have the stock rings but I have the bottom and top wood.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode