Ruger P95 clip

dolecs · 03-20-2008, 08:27 PM

just bought a new ruger P95 and the magazine goes in really hard and wont fall out when the magazine release button is pressed, not impressed, any suggestions would be greatly appreciated!

Mooseman684 · 03-20-2008, 08:29 PM

Is it a Ruger Mag. or an aftermarket ???

dolecs · 03-20-2008, 08:49 PM

its a ruger mag, i loaded 10 remington bullets into it, and it sat over night with the mag in the gun, nothing in the chamber and today when i went to take the mag out nothing happened, i had to pry the mag out and it does not want to go back in, i noticed 2 high spots on the mag that developed over night. Im real close to taking it back

Mooseman684 · 03-20-2008, 08:55 PM

The mag Grew High spots Overnite ??? Never heard of such !

dolecs · 03-20-2008, 09:18 PM

on the back of the magazine 2 high spots are rubbing on the ejector when the mag is inserted

daddyo · 03-21-2008, 05:37 AM

I've got a P89. With a loaded mag and nothing in the chamber, the mag literally jumps out when released. I'd say see if the dealer will exchange it.

gcsod45 · 03-21-2008, 06:13 PM

Even my after market mag jumps out of my P95

03-20-2008, 08:27 PM	#1
dolecs Member Join Date: Jan 2008 Posts: 27 Trader Rating: (0)	Ruger P95 clip just bought a new ruger P95 and the magazine goes in really hard and wont fall out when the magazine release button is pressed, not impressed, any suggestions would be greatly appreciated!

03-20-2008, 08:29 PM	#2
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,056 Trader Rating: (0)	Is it a Ruger Mag. or an aftermarket ??? __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

03-20-2008, 08:55 PM	#4
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,056 Trader Rating: (0)	The mag Grew High spots Overnite ??? Never heard of such ! __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-20-2008, 08:49 PM	#3
dolecs Member Join Date: Jan 2008 Posts: 27 Trader Rating: (0)	its a ruger mag, i loaded 10 remington bullets into it, and it sat over night with the mag in the gun, nothing in the chamber and today when i went to take the mag out nothing happened, i had to pry the mag out and it does not want to go back in, i noticed 2 high spots on the mag that developed over night. Im real close to taking it back

03-20-2008, 09:18 PM	#5
dolecs Member Join Date: Jan 2008 Posts: 27 Trader Rating: (0)	on the back of the magazine 2 high spots are rubbing on the ejector when the mag is inserted

03-21-2008, 05:37 AM	#6
daddyo Senior Member Join Date: Aug 2007 Location: Birmingham, AL Posts: 151 Trader Rating: (0)	I've got a P89. With a loaded mag and nothing in the chamber, the mag literally jumps out when released. I'd say see if the dealer will exchange it.

03-21-2008, 06:13 PM	#7
gcsod45 Member Join Date: Mar 2008 Location: Southeast Aridzona Posts: 48 Trader Rating: (0)	Even my after market mag jumps out of my P95