| In my opinion,under MOA is great for out of the box rifle.I would get the wood stock finished,try it and after a few rounds look in the barrel channel for wear marks,also check where the frame or housing sets in the stock to see if it is moving.If either the barrel channel or housing area are touching and moving there will be dark shiney spots on the wood.If the housing is moving,you need to glass bed the housing area.If the barrel channel is hitting the barrel you need to take enough out to clear. Reenstall making sure you can slide a dollar bill clear to the housing between the barrel and stock.Be careful to tighten,but not overtighten the screws on the action.If everything is fine it is time to play with loads and bullets to find what your rifle likes.It sounds like you already have a fine shooter.The aftermarket stock probably supports the action better and the plastic stock is just letting it do whatever it wants. sam. |