Ruger 10 22 ammo question

[ljs12]

I have a new 10-22 and have been experiencing problems with it.I've only shot about 50 rounds and have had several jams. Sometimes the shell doesn't eject properly and holds the bolt open, other times 2 rounds try to feed from the magazine. I'm thinking it doesn't like the ammo. I'm using Federal Champion 525 value pack.Anyone recommend a different ammo or is it another problem? Thanks

[Rem 742 30-06]

Sounds like a magazine problem to me. WHat kind of magazine are you using

[BaserRonin]

I would try taking it down, cleaning it, and giving it a very light coat of oil. Maybe clean the magazine at the same time, just be sure to wind it to the correct tension. That 10/22 should feed anything you give it

[mitch_mckee]

Originally Posted by ljs12

I have a new 10-22 and have been experiencing problems with it.I've only shot about 50 rounds and have had several jams. Sometimes the shell doesn't eject properly and holds the bolt open, other times 2 rounds try to feed from the magazine. I'm thinking it doesn't like the ammo. I'm using Federal Champion 525 value pack.Anyone recommend a different ammo or is it another problem? Thanks

Mine feeds anything. I'd have to try hard to make it jamb. I think you may have a mechanical problem but eliminate the possibility of dirt and give it another try.

[ljs12]

I'm using the factory supplied magazine. Not sure how to clean it.

[mitch_mckee]

Originally Posted by ljs12

I'm using the factory supplied magazine. Not sure how to clean it.

Here you go. This looks right. It's not as easy as it looks to get back together but if I can do it, anyone can:

Disassembling, cleaning, and reassembling a Ruger 10/22 rotary magazine

[Deep13]

After a mere 50 rds. the magazine should not be malfunctioning. Factory rotary magazines are pretty reliable. I find with mine that it needs high velocity ammunition to cycle the automatic action. Also, once it gets warm, it needs copper-coated bullets to avoid being deformed on the heated ramp.

[nathangdad]

Sometimes guns arrive with "packing grease" that can
cause problems especially with a semi-auto .22.

I advise removing the stock then giving the entire
gun as thorough a cleaning as possible with a good
firearms grease remover (not an industrial solvent that
will ruin the finish). A gunsmith or quality sporting goods
store can refer you to a proper grease remover available
either in their store or in your area. Then wipe clean followed
by a bit of lubrication with a light oil such as 3-in-1.

Perhaps this will take care of your problem. It has been
successful for others. Ruger has a good reputation
for quality so, while it could occur, it is not likely you
have a defective component.

Good luck and good shooting.

[ljs12]

Very nice video and step by step instructions.

I've been told ruger is a good gun. Sounds like I need to clean it and go from there.

[scoutman]

well your problem is that you have a ruger just kidding i just dont like the 10/22 just dont seems overprice and cheaply made

[sell33]

What???^^^^ lol i don't know anyone that doesn't like the 10/22....i love mine although it also jams every once in a while, usually only with my hi cap magazine tho. the factory one seems to work fine and i have never cleaned it (maybe i should lol)

[scoutman]

Originally Posted by sell33

What???^^^^ lol i don't know anyone that doesn't like the 10/22....i love mine although it also jams every once in a while, usually only with my hi cap magazine tho. the factory one seems to work fine and i have never cleaned it (maybe i should lol)

yes i dont like em in their stock form but if they are heavly upgraded i think i woul get one but maybe i looked at one when i got my Marlin model 60 SB and it had a thumbhole stock and heavy barrel and a scope on it, it fit perfect and i liked it but the price tag was like $550 and that was way out of my budget my marlin cost me 199.99. i dont realy like the Rugers but if i ever get a 22 pistol i will be a Ruger cuzz i like them

[J-Rod]

Originally Posted by ljs12

I have a new 10-22 and have been experiencing problems with it.I've only shot about 50 rounds and have had several jams. Sometimes the shell doesn't eject properly and holds the bolt open, other times 2 rounds try to feed from the magazine. I'm thinking it doesn't like the ammo. I'm using Federal Champion 525 value pack.Anyone recommend a different ammo or is it another problem? Thanks

I never had any jamming of my 10/22 with the factory clip until i used the federal bulk ammo, anything else shot fine

[LarryO1970]

Originally Posted by ljs12

Very nice video and step by step instructions.

I've been told ruger is a good gun. Sounds like I need to clean it and go from there.

I have has two Ruger 10/22's since 1988... and other performed flawlessly, even while VERY dirty.

To me, it sounds as if there is an ammo/magazine marriage fault.

Generally, it is the after market magazines that fail. Check with Ruger to see if they have a recall on newly manufactured magazines too.

To cause a "double feed", it truly sounds like the magazine as the recoil is not enough to be a potential cause.

[BaserRonin]

I do have 1 bad Ruger manufacture 10 rd magazine. The plastic is a little off, so it sits in the magazine well wrong. You can see it is not flush with the bottom of the receiver; it goes in a touch too far. This thing will cause all kinds of feeding problems. Could be a bad magazine.