Quote:
Originally Posted by thebluesbox  Thanks for all the replies, I read the other post, as well as this one and I striped the bolt tonight all the way, cleaned, brushed, every part and oiled then reassembled. The firing pin??? I screwed the cocking peice down until it was about flush with the head because I dont know how to check it, can someone fill me in? Other than that I cleaned the chamber again after shooting it today and put it all back together. Dry firing it I can feel its a little sticky to open but not that bad at all, hardly noticable really. But its when I fired it today for the first time that I was able to tell that it would be really hard to open. Dont know if this detail strip and cleaning the bolt has helped until I can shoot again, in the mean time I can check the firing pin adjustment if someone can tell me that proceedure. |
well I could tell you and then a week from now you would forget how so instead am going to give you what is above in a sticky .. this site is the best that I have found .
You will probably be an expert after you read all this LOL
Mosin Nagant Rifle Exploded Views and Disassembly
BTW if its tight after lifting the bolt you have a problem it should almost fall back freely