My Yugo SKS hates HP ammo

RMTactical · 04-13-2008, 02:51 PM

I always have an issues with chambering the first round when I load my SKS with HP ammo.

Guess I have to stick with FMJ and SP's. Anyone else have this issue with their SKS? I don't recall having this issue with my Norinco Paratrooper.

marcusdunn8192 · 04-13-2008, 03:06 PM

Ive had problems with the zytel mags using HP but factory mags seem to work ok

squirrelbaster · 04-13-2008, 03:12 PM

my norinco will eat anything i feed it.

texnmidwest · 04-13-2008, 03:26 PM

My Yugo is not too finicky. Likes the FMJ stuff best though.

sean46953 · 04-13-2008, 03:37 PM

I didn't have anymore problems with Wolf HP's than I've had with FMJ Wolf. Yet, my Yugo just absolutlet hates Wolf. lol

res45 · 04-13-2008, 06:34 PM

When you cleaned the rifle did you take out the magazine and clean the spring and feed lip,if you have a weak mag spring it may not be lifting up the Rd. high enough to feed reliably. Question is does it do the same thing with less Rds. say 5.

jack007 · 04-13-2008, 08:45 PM

Do you have a detachable magazine?The only time I have had feed problems it was due to mag problems.Never had any problems with the factory magazine.

Mooseman684 · 04-13-2008, 08:48 PM

The hollow Points are so small they are not that much different from FMJ bullets to matter...Something else needs to be looked at...I shoot both without problem.
Rich

jmp8927 · 04-13-2008, 09:50 PM

If it is detachable mags and they're metal, try bending the mag right in front of the follower. Mine has a flange of metal there that can be bent and depending on where you bend it, the follower sill stop in certain positions. You can bend it so the front of the follower is slightly higher than it was and thus the front of your bullet will be in a better position to slide into the chamber.

RMTactical · 04-14-2008, 03:23 AM

Quote:

Originally Posted by res45

When you cleaned the rifle did you take out the magazine and clean the spring and feed lip,if you have a weak mag spring it may not be lifting up the Rd. high enough to feed reliably. Question is does it do the same thing with less Rds. say 5.

No, only on the 1st round.

Quote:

Originally Posted by Mooseman684

The hollow Points are so small they are not that much different from FMJ bullets to matter...Something else needs to be looked at...I shoot both without problem.
Rich

Can't be. I never have issues with FMJ and SP's.

Quote:

Originally Posted by sean46953

I didn't have anymore problems with Wolf HP's than I've had with FMJ Wolf. Yet, my Yugo just absolutlet hates Wolf. lol

All of my guns have some issues with Wolf. Too many blown primers, hard primers, etc...

marion57 · 04-14-2008, 06:22 AM

Quote:

Originally Posted by RMTactical

I always have an issues with chambering the first round when I load my SKS with HP ammo.

Guess I have to stick with FMJ and SP's. Anyone else have this issue with their SKS? I don't recall having this issue with my Norinco Paratrooper.

two things you can try
First load it from a stripper clip and before you release the bolt take your finger and push the last rnd down hard then release bolt see if it loads
Second . no stripper load a set of five in the mag by hand and then release bolt see if it feeds
then

RMTactical · 04-14-2008, 11:08 AM

Quote:

Originally Posted by marion57

two things you can try
First load it from a stripper clip and before you release the bolt take your finger and push the last rnd down hard then release bolt see if it loads
Second . no stripper load a set of five in the mag by hand and then release bolt see if it feeds
then

Tried both of those. The first one doesn't work.

Works fine if I load less than 10.

Beer Forever · 04-14-2008, 11:50 AM

That is weird, I would look at your stripper clips and see if there are any defects. I don't see why it will work loading less than 10 by hand and not with stripper clips. Odd

My Yugo as never had any problems, but all I have every shot out of it is Wolf loaded onto stripper clips, can't remember if they are all FMJ or if there are some HP in the mix too.

jmp8927 · 04-14-2008, 02:30 PM

Is the mag nice and clean? Maybe there's some gunk in the bottom preventing the spring from setting properly in the bottom.

Oh and for the record, my Norinco eats Winchester, Remington, and Wolf(lacquer or poly coated) very well. I have had one or two instances of Wolf HP not feeding properly, but they're rare. Come to think of it, it hasn't happened in quite a long while.

marion57 · 04-14-2008, 05:13 PM

Quote:

Originally Posted by RMTactical

Tried both of those. The first one doesn't work.

Works fine if I load less than 10.

You my friend have a weak spring if it works with less than ten or as stated something is binding

Sins-of-Mosin · 04-14-2008, 06:13 PM

If I remember right, my Yugo only liked FMJ Brown Bear. Anything else including HP would jam it. I always tell the story like it's a woman.

Don't hurt me fellow women members.

RMTactical · 04-15-2008, 01:52 PM

I am not sure what the problem is. The weapon is clean inside and out. I don't have issues as long as I am not shooting HP's, they just don't get guided into the chamber.

marion57 · 04-15-2008, 04:13 PM

Quote:

Originally Posted by RMTactical

I am not sure what the problem is. The weapon is clean inside and out. I don't have issues as long as I am not shooting HP's, they just don't get guided into the chamber.

I use brown bear soft points have some hp but havent shot it yet so cant tell you anything about it

dispatch55126 · 04-15-2008, 07:20 PM

Maybe I just lucked out but my Yugo loves Wolf Blackbox HP's. Tight groups, never had a FTF/FTE. Its the only thing I feed it.

RMTactical · 04-15-2008, 08:55 PM

Maybe it's something with the Wolf. I haven't tried any other brands of HP's in this SKS, but never had issues of any kind with anything other than Wolf.

Just cleaned my SKS after having shot it from the other day and noticed that part of a primer had covered my firing pin and was stuck on there... It came off with one dry fire trigger pull, but the amount of hard primers and blown primers I am getting with Wolf ammo in every caliber is just getting ridiculous...

I know this isn't primer related (the feeding), but what is it about Wolf? It's the only ammo that gives me issues in any of the weapons I own. When I shoot better quality ammo, no issues...

04-13-2008, 02:51 PM	#1
RMTactical Senior Member Join Date: Dec 2007 Location: Rocky Mountains Posts: 173	My Yugo SKS hates HP ammo I always have an issues with chambering the first round when I load my SKS with HP ammo. Guess I have to stick with FMJ and SP's. Anyone else have this issue with their SKS? I don't recall having this issue with my Norinco Paratrooper. __________________ rockymountaintactical.net

04-13-2008, 03:12 PM	#3
squirrelbaster Senior Member Join Date: Jan 2008 Location: Ohio Posts: 2,264	my norinco will eat anything i feed it. __________________ "My Shotgun SAYS I AM the POLICE !"--Mooseman684 "I like Turtles!" youtube kid

04-13-2008, 03:26 PM	#4
texnmidwest Listen to yur Inner Hippo Join Date: Dec 2007 Location: South east Wisconsin Posts: 3,439	My Yugo is not too finicky. Likes the FMJ stuff best though. __________________ "Quando Omni Flunkus Moritati" (If all else fails play dead)

04-13-2008, 03:37 PM	#5
sean46953 Senior Member Join Date: Jun 2007 Location: Marion, Indiana Posts: 357	I didn't have anymore problems with Wolf HP's than I've had with FMJ Wolf. Yet, my Yugo just absolutlet hates Wolf. lol __________________ http://i206.photobucket.com/albums/b...00_0535100.jpgSean M. Hartman

04-13-2008, 08:48 PM	#8
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,668 Images: 2	The hollow Points are so small they are not that much different from FMJ bullets to matter...Something else needs to be looked at...I shoot both without problem. Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

04-13-2008, 03:06 PM	#2
marcusdunn8192 Member Join Date: Mar 2008 Posts: 15	Ive had problems with the zytel mags using HP but factory mags seem to work ok

04-13-2008, 06:34 PM	#6
res45 Senior Member Join Date: Jul 2007 Posts: 322	When you cleaned the rifle did you take out the magazine and clean the spring and feed lip,if you have a weak mag spring it may not be lifting up the Rd. high enough to feed reliably. Question is does it do the same thing with less Rds. say 5.

04-13-2008, 08:45 PM	#7
jack007 Senior Member Join Date: Apr 2008 Location: texas Posts: 130	Do you have a detachable magazine?The only time I have had feed problems it was due to mag problems.Never had any problems with the factory magazine.

04-13-2008, 09:50 PM	#9
jmp8927 Senior Member Join Date: Nov 2007 Location: Walterboro, SC Posts: 1,139 Images: 17	If it is detachable mags and they're metal, try bending the mag right in front of the follower. Mine has a flange of metal there that can be bent and depending on where you bend it, the follower sill stop in certain positions. You can bend it so the front of the follower is slightly higher than it was and thus the front of your bullet will be in a better position to slide into the chamber. __________________ Doing the unexpected makes the unexpected the expected and thus the expected becomes the unexpected.

04-14-2008, 11:50 AM	#13
Beer Forever Senior Member Join Date: Dec 2005 Location: Tucson, AZ Posts: 2,714	That is weird, I would look at your stripper clips and see if there are any defects. I don't see why it will work loading less than 10 by hand and not with stripper clips. Odd My Yugo as never had any problems, but all I have every shot out of it is Wolf loaded onto stripper clips, can't remember if they are all FMJ or if there are some HP in the mix too. __________________ Paramedic sks forever

04-14-2008, 02:30 PM	#14
jmp8927 Senior Member Join Date: Nov 2007 Location: Walterboro, SC Posts: 1,139 Images: 17	Is the mag nice and clean? Maybe there's some gunk in the bottom preventing the spring from setting properly in the bottom. Oh and for the record, my Norinco eats Winchester, Remington, and Wolf(lacquer or poly coated) very well. I have had one or two instances of Wolf HP not feeding properly, but they're rare. Come to think of it, it hasn't happened in quite a long while. __________________ Doing the unexpected makes the unexpected the expected and thus the expected becomes the unexpected. Last edited by jmp8927; 04-14-2008 at 02:33 PM. Reason: Automerged Doublepost

04-14-2008, 06:13 PM	#16
Sins-of-Mosin Senior Member Join Date: Mar 2008 Location: IL Posts: 194 Blog Entries: 3	If I remember right, my Yugo only liked FMJ Brown Bear. Anything else including HP would jam it. I always tell the story like it's a woman. Don't hurt me fellow women members. __________________ Leave me alone I am not an angel yet. [SIGPIC][/SIGPIC] http://i59.photobucket.com/albums/g3...13/themets.png

04-15-2008, 01:52 PM	#17
RMTactical Senior Member Join Date: Dec 2007 Location: Rocky Mountains Posts: 173	I am not sure what the problem is. The weapon is clean inside and out. I don't have issues as long as I am not shooting HP's, they just don't get guided into the chamber. __________________ rockymountaintactical.net

04-15-2008, 07:20 PM	#19
dispatch55126 Member Join Date: Mar 2008 Posts: 19	Maybe I just lucked out but my Yugo loves Wolf Blackbox HP's. Tight groups, never had a FTF/FTE. Its the only thing I feed it.

04-15-2008, 08:55 PM	#20
RMTactical Senior Member Join Date: Dec 2007 Location: Rocky Mountains Posts: 173	Maybe it's something with the Wolf. I haven't tried any other brands of HP's in this SKS, but never had issues of any kind with anything other than Wolf. Just cleaned my SKS after having shot it from the other day and noticed that part of a primer had covered my firing pin and was stuck on there... It came off with one dry fire trigger pull, but the amount of hard primers and blown primers I am getting with Wolf ammo in every caliber is just getting ridiculous... I know this isn't primer related (the feeding), but what is it about Wolf? It's the only ammo that gives me issues in any of the weapons I own. When I shoot better quality ammo, no issues... __________________ rockymountaintactical.net