bolt problems

seabee1984 · 05-02-2008, 07:36 PM

i was cleaning my m44 for the first time and when i put the bolt back in the gun it went in fine but now i cannot get it back out it is like the trigger is getting caught any advise.

toolman · 05-02-2008, 08:40 PM

Does the trigger feel normal and does the bolt rotate like it should?

Mosin Shooter · 05-03-2008, 04:39 PM

you might have a sear problem, if you can disassemble the rifle completely and look for broken or worn parts.

R5CYA · 05-03-2008, 06:15 PM

sure the trigger is working right? maybe the pivot pin fell out? if you did lose it, the shank of a 4mm drill bit makes a nice replacement.

05-02-2008, 07:36 PM	#1
seabee1984 Registered User Join Date: Apr 2008 Posts: 7	bolt problems i was cleaning my m44 for the first time and when i put the bolt back in the gun it went in fine but now i cannot get it back out it is like the trigger is getting caught any advise.

05-02-2008, 08:40 PM	#2
toolman Mr. Fixit Join Date: Apr 2002 Location: abilene,tx Posts: 5,582 Blog Entries: 22	Does the trigger feel normal and does the bolt rotate like it should? __________________ Don't be messin' with my gun!

05-03-2008, 04:39 PM	#3
Mosin Shooter Senior Member Join Date: Jan 2008 Posts: 416	you might have a sear problem, if you can disassemble the rifle completely and look for broken or worn parts. __________________ Save a cow, eat a vegetarian.

05-03-2008, 06:15 PM	#4
R5CYA Senior Member Join Date: Feb 2008 Location: San Bruno, Republic of Kalifornia Posts: 646	sure the trigger is working right? maybe the pivot pin fell out? if you did lose it, the shank of a 4mm drill bit makes a nice replacement. __________________ *TROLL HUNTER!* Last edited by R5CYA; 05-03-2008 at 09:02 PM. Reason: the cat made me