Just got the Huber trigger, one problem though... - Page 2

Smokin' Nagant · 05-04-2008, 12:58 AM

ok thanks guys ill get one tomorrow see how it works out

marion57 · 05-04-2008, 02:09 AM

Quote:

Originally Posted by toolman

The besteasiest method is to use a handheld impact driver with the correct bit. If you're unfamiliar with one, here's a link:
Impact driver - Wikipedia, the free encyclopedia

+1
listen to tool man he knows what he is talking about !
If you use the right bit with the impact driver I know it will come out

Mooseman684 · 05-04-2008, 02:21 AM

Or break off...

DWARREN123 · 05-04-2008, 06:07 AM

Maybe try a little heat first. If cosmoline or crud it may make it easier to remove. A large soldering iron or small hand torch will usually do the job, do not over heat.

SwedeSteve · 05-04-2008, 06:24 AM

Any luck yet SN?

marion57 · 05-04-2008, 08:37 AM

Quote:

Originally Posted by Mooseman684

Or break off...

Maybe but that screw looks to be a heat treated hardend screw it shouldnt break like our US made screws that are so commonly used

billy · 05-04-2008, 08:51 AM

Quote:

Originally Posted by marion57

+1
listen to tool man he knows what he is talking about !
If you use the right bit with the impact driver I know it will come out

the guys name IS toolman fer cryin out loud!

or for us in the know cap'n tool

lefty o · 05-04-2008, 08:59 AM

he may be the toolman, but an impact driver would be my last choice for a tool to be used on a gun.

toolman · 05-04-2008, 10:56 AM

Quote:

Originally Posted by lefty o

he may be the toolman, but an impact driver would be my last choice for a tool to be used on a gun.

Like my wife tells me, it's not what tool ya use it's all in how ya use it....

BTW Smokin N, another option is the use a small pair of Vice Grips to grab the outside of the screw, but it's going to get buggered up a bit. There are a bunch of ways to get it out, I prefer the easy ones first.

billy · 05-04-2008, 11:01 AM

Quote:

Originally Posted by toolman

Like my wife tells me, it's not what tool ya use it's all in how ya use it....

what do you mean uncle toolman?
(stares up with wide eyed innocence)

toolman · 05-04-2008, 11:23 AM

Quote:

Originally Posted by billy

what do you mean uncle toolman?
(stares up with wide eyed innocence)

Well, um, ya see son....

billy · 05-04-2008, 11:27 AM

Quote:

Originally Posted by toolman

Well, um, ya see son....

yeah yeah
i know
go ask yer mother........

Capt'n Mil Coll · 05-04-2008, 11:56 AM

Here Smokin this is how you get that stuck screw out. You put the screwdriver in the slot and hold it tight. Have a friend turn you around as you hold that screwdriver. And in no time that stubborn screw will be out. Glad to help ya. Send me $20.

Smokin' Nagant · 05-04-2008, 01:24 PM

Quote:

Originally Posted by Capt'n Mil Coll

Here Smokin this is how you get that stuck screw out. You put the screwdriver in the slot and hold it tight. Have a friend turn you around as you hold that screwdriver. And in no time that stubborn screw will be out. Glad to help ya. Send me $20.

none of my freinds can turn my 200 pound ass if they wanted. im going now to the Depot to get the impact driver. i tried heat again, no luck, so if one of these tools are cheap, then sweet, if not, to the gunsmith.

but knowing my gunsmiths around here, it will either take 8 weeks, or they will tell me they cant get it out.

we'll see

LefthandShooter · 05-04-2008, 02:36 PM

Here is a perfect solution: Just go buy another Mosin and put that one on the shelf as a display piece! This way you will have a MN to shoot while you try other ways to remove it or wait on the gunsmith.

Smokin' Nagant · 05-04-2008, 02:45 PM

i have my mini-14 to shoot if the mosin has be worked on to get the bolt out

SwedeSteve · 05-04-2008, 02:53 PM

I was gonna say to use needle nose vice grips. It'll mess up the screw, but you'll get it out. Plus you can't see the screw anyway. And if you're still concerned, just order a new one!

LefthandShooter · 05-04-2008, 03:22 PM

Quote:

Originally Posted by Smokin' Nagant

i have my mini-14 to shoot if the mosin has be worked on to get the bolt out

NO NO NO!!! You need another gun - prfeferably a Mosin!

Maybe my wife will let me buy one on your behalf?

tmfun · 05-04-2008, 04:07 PM

Yup! That stuff works great for loosening stuck screws and bolts. It penetrates much better than WD. Also, believe it or not, soaking the parts in Coca Cola overnight works too. That stuff will even eat through concrete.

Smokin' Nagant · 05-04-2008, 04:34 PM

well i went to home depot and apparantly an impact driver is a specialty tool and they dont have it. PLUS all the Ace Hardware's in my area are closed sunday, wtf. i guess i will get it done tomorrow...

05-04-2008, 02:21 AM	#23
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,736 Images: 2	Or break off... __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

05-04-2008, 06:07 AM	#24
DWARREN123 Senior Member Join Date: Jan 2004 Location: BETWEEN TN & KY Posts: 781	Maybe try a little heat first. If cosmoline or crud it may make it easier to remove. A large soldering iron or small hand torch will usually do the job, do not over heat. __________________ Have a nice day!

05-04-2008, 06:24 AM	#25
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 10,449 Images: 1	Any luck yet SN? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-04-2008, 11:56 AM	#33
Capt'n Mil Coll Military Rifle Collector Join Date: Mar 2008 Location: Right behind you. -NRA Member- Posts: 2,317 Images: 15	Here Smokin this is how you get that stuck screw out. You put the screwdriver in the slot and hold it tight. Have a friend turn you around as you hold that screwdriver. And in no time that stubborn screw will be out. Glad to help ya. Send me $20. __________________ Let's light this fuse and see what happens!

05-04-2008, 02:36 PM	#35
LefthandShooter Senior Member Join Date: Nov 2007 Location: In A House in NE Ohio! Posts: 1,493	Here is a perfect solution: Just go buy another Mosin and put that one on the shelf as a display piece! This way you will have a MN to shoot while you try other ways to remove it or wait on the gunsmith. __________________ VOTE Mooseman64 / Billy for President/VP!!

05-04-2008, 12:58 AM	#21
Smokin' Nagant Senior Member Join Date: Apr 2008 Posts: 136	ok thanks guys ill get one tomorrow see how it works out

05-04-2008, 08:59 AM	#28
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,815	he may be the toolman, but an impact driver would be my last choice for a tool to be used on a gun.

05-04-2008, 02:45 PM	#36
Smokin' Nagant Senior Member Join Date: Apr 2008 Posts: 136	i have my mini-14 to shoot if the mosin has be worked on to get the bolt out

05-04-2008, 02:53 PM	#37
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 10,449 Images: 1	I was gonna say to use needle nose vice grips. It'll mess up the screw, but you'll get it out. Plus you can't see the screw anyway. And if you're still concerned, just order a new one! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-04-2008, 04:07 PM	#39
tmfun Member Join Date: Sep 2007 Location: San Jose, California Posts: 69	Yup! That stuff works great for loosening stuck screws and bolts. It penetrates much better than WD. Also, believe it or not, soaking the parts in Coca Cola overnight works too. That stuff will even eat through concrete.

05-04-2008, 04:34 PM	#40
Smokin' Nagant Senior Member Join Date: Apr 2008 Posts: 136	well i went to home depot and apparantly an impact driver is a specialty tool and they dont have it. PLUS all the Ace Hardware's in my area are closed sunday, wtf. i guess i will get it done tomorrow...