Wasr 10 - Page 2

voidfinger · 05-11-2008, 03:42 PM

Hey guys I'm new to the forum. I was looking at getting a WASR-10 and Found this thread. After looking at what you guys had to say i was currious where I could find a Yugo underfolder? I looked on the net and only other forums were selling them in the WTS sections. It said somewhere up above that you could get the yugo underfolder for like 100 dollars more than the 350 dollar wasr-10... where can i find one with the stuff for that? also, I went to the centuryarm site and you have to be a dealer to buy guns... so what am I left with here guys... also, my dad has a mak 90 and it is a very very very well put together gun ... does the yugo compair? and my brother has the romanian one and its not the nicest... the bolt hangs on the hammer when you cock it back ya know.

voidfinger · 05-11-2008, 04:12 PM

I'm new but where can I get a decent priced underfolder? I saw someone on this thread say you can get them for like 400 or 450 dollars... where at? I went to this century arms and they only sell to gun sellers or something so where can I get one for decently cheap.

Also, my pops has a mac90 and its a really nicely done gun. Does the yugo compair with the quality?

billy · 05-11-2008, 04:19 PM

Quote:

Originally Posted by Pred

No, but you'll care if your WASR-10 is shooting 14" to the right and my MAK-90 is shooting 1" low at 200 yards.

ive got a wasr also and it sure as hell dont shoot like that!
$300
shoots fine.

it sounds like you are talking about a broken rifle.

i dont shoot it much anymore because just about any bolt rifle is more accurate than an ak.
all of my bolts are .
my 308 saiga does ok
1 1/2 MOA

Hahn · 05-11-2008, 06:27 PM

you all talking about a WASR10 or GP WASR10/63 night and day difference.

voidfinger · 05-11-2008, 06:34 PM

whats the difference?

Hahn · 05-11-2008, 07:20 PM

GP wasr10/63 is mil spec'd. A lot of care was put into them. Very minimal imperfections. No canted sights or gas block. Sights almost dead on at 100 yrds wo/adjusting. Zero misfires or jams execpt for a bad Wolf round which I recycled and it went boom. Matching wood which looks awsome. Tapco G2 fcg. Chrome lined barrel. Beefed up front trunnion. But like all AKs in the US they'r casterated by B.A.T.F. and parts compliance crap. Love my 10/63. I will admit that that Century's hammer was too long and hit high on the bolt more than it did on the firing-pin but dremeled that issue away in 10 mins. This rifle is square from butt stock to muzzle.

voidfinger · 05-11-2008, 07:34 PM

nice, so where can i get one and how much do they run?

Hahn · 05-11-2008, 07:43 PM

You will have to Google that question. Type "GP WASR10/63 prices" will give you some leads. But the factory that made the the WASR in Romania is switching to making auto parts so I don't know whats available for low cost AK. You can other varients like STG 2000 fairly cheap but I don't much about them. I think theyr WASR10/63s with plastic furniture not wood and other minor differences. I could be wrong and usually am.lol Good shoping.

SuckLead · 05-13-2008, 10:36 PM

I dunno, guys. I wasn't expecting much from my WASR-10 when I bought it, I just got it as a fun gun. But it floored me how accurate it was. Mine is pretty darn tight. No matter what AK I had though, I'd still reach for my K31 if I was shooting for marksmanship. If I want to blow off steam and just leave the range with a smile, though, any AK will do.

billy · 05-13-2008, 10:43 PM

Quote:

Originally Posted by SuckLead

I dunno, guys. I wasn't expecting much from my WASR-10 when I bought it, I just got it as a fun gun. But it floored me how accurate it was. Mine is pretty darn tight. No matter what AK I had though, I'd still reach for my K31 if I was shooting for marksmanship. If I want to blow off steam and just leave the range with a smile, though, any AK will do.

yeah!

voidfinger · 05-14-2008, 08:50 AM

Ok, well I've looked around and what is the difference between the GP WASR-10 and the GP WASR-10/63 ? This is because I can't seem to find the 10/63 call out and I've only found the GP model?

Capt'n Mil Coll · 05-14-2008, 10:56 AM

I had a WASR-10 that shot so off target I was hitting trees behind me. I would aim at the target and hit a tree behind me. (well maybe not quite that bad).

voidfinger · 05-19-2008, 12:09 PM

Well I just got my GP WASR-10/63 sidefolder from the gun shop in my home town. Pretty nice looking gun. I think i'm gonna get a standard butt to go on it though.

tommy · 05-19-2008, 02:14 PM

pictures /pictures???

Quote:

Originally Posted by voidfinger

Well I just got my GP WASR-10/63 sidefolder from the gun shop in my home town. Pretty nice looking gun. I think i'm gonna get a standard butt to go on it though.

voidfinger · 05-19-2008, 04:02 PM

I need to get the connector for my digital camera lol... I can spend 420 bucks on this rifle but not 20 bucks on a connector lol. I'll see what I can come up with.

I need to get the connector for my digital camera lol... I can spend 420 bucks on this rifle but not 20 bucks on a connector lol. I'll see what I can come up with.

mike63 · 05-20-2008, 01:18 PM

Quote:

Originally Posted by Capt'n Mil Coll

I had a WASR-10 that shot so off target I was hitting trees behind me. I would aim at the target and hit a tree behind me. (well maybe not quite that bad).

Maybe you should try turning it around.

voidfinger · 07-13-2008, 10:07 PM

haha pics finaly almost forgot about this tread.

Sorry about the format for the pics... don't have them online to link so i had to upload this way 8)

05-13-2008, 10:36 PM	#29
SuckLead Senior Member Join Date: Aug 2007 Location: USA Posts: 572 Trader Rating: (0)	I dunno, guys. I wasn't expecting much from my WASR-10 when I bought it, I just got it as a fun gun. But it floored me how accurate it was. Mine is pretty darn tight. No matter what AK I had though, I'd still reach for my K31 if I was shooting for marksmanship. If I want to blow off steam and just leave the range with a smile, though, any AK will do. __________________ "Ruin a liberal's day; recite historical fact." - found on a bumper sticker

05-14-2008, 10:56 AM	#32
Capt'n Mil Coll Military Rifle Collector Join Date: Mar 2008 Location: Right behind you. -NRA Member- Posts: 2,011 Trader Rating: (0)	I had a WASR-10 that shot so off target I was hitting trees behind me. I would aim at the target and hit a tree behind me. (well maybe not quite that bad). __________________ Let's light this fuse and see what happens!

05-19-2008, 04:02 PM	#35
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	I need to get the connector for my digital camera lol... I can spend 420 bucks on this rifle but not 20 bucks on a connector lol. I'll see what I can come up with. I need to get the connector for my digital camera lol... I can spend 420 bucks on this rifle but not 20 bucks on a connector lol. I'll see what I can come up with. Last edited by voidfinger; 05-19-2008 at 04:02 PM. Reason: Automerged Doublepost

05-11-2008, 03:42 PM	#21
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	Hey guys I'm new to the forum. I was looking at getting a WASR-10 and Found this thread. After looking at what you guys had to say i was currious where I could find a Yugo underfolder? I looked on the net and only other forums were selling them in the WTS sections. It said somewhere up above that you could get the yugo underfolder for like 100 dollars more than the 350 dollar wasr-10... where can i find one with the stuff for that? also, I went to the centuryarm site and you have to be a dealer to buy guns... so what am I left with here guys... also, my dad has a mak 90 and it is a very very very well put together gun ... does the yugo compair? and my brother has the romanian one and its not the nicest... the bolt hangs on the hammer when you cock it back ya know.

05-11-2008, 04:12 PM	#22
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	I'm new but where can I get a decent priced underfolder? I saw someone on this thread say you can get them for like 400 or 450 dollars... where at? I went to this century arms and they only sell to gun sellers or something so where can I get one for decently cheap. Also, my pops has a mac90 and its a really nicely done gun. Does the yugo compair with the quality?

05-11-2008, 06:27 PM	#24
Hahn Member Join Date: Mar 2008 Posts: 84 Trader Rating: (0)	you all talking about a WASR10 or GP WASR10/63 night and day difference.

05-11-2008, 06:34 PM	#25
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	whats the difference?

05-11-2008, 07:20 PM	#26
Hahn Member Join Date: Mar 2008 Posts: 84 Trader Rating: (0)	GP wasr10/63 is mil spec'd. A lot of care was put into them. Very minimal imperfections. No canted sights or gas block. Sights almost dead on at 100 yrds wo/adjusting. Zero misfires or jams execpt for a bad Wolf round which I recycled and it went boom. Matching wood which looks awsome. Tapco G2 fcg. Chrome lined barrel. Beefed up front trunnion. But like all AKs in the US they'r casterated by B.A.T.F. and parts compliance crap. Love my 10/63. I will admit that that Century's hammer was too long and hit high on the bolt more than it did on the firing-pin but dremeled that issue away in 10 mins. This rifle is square from butt stock to muzzle.

05-11-2008, 07:34 PM	#27
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	nice, so where can i get one and how much do they run?

05-11-2008, 07:43 PM	#28
Hahn Member Join Date: Mar 2008 Posts: 84 Trader Rating: (0)	You will have to Google that question. Type "GP WASR10/63 prices" will give you some leads. But the factory that made the the WASR in Romania is switching to making auto parts so I don't know whats available for low cost AK. You can other varients like STG 2000 fairly cheap but I don't much about them. I think theyr WASR10/63s with plastic furniture not wood and other minor differences. I could be wrong and usually am.lol Good shoping.

05-14-2008, 08:50 AM	#31
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	Ok, well I've looked around and what is the difference between the GP WASR-10 and the GP WASR-10/63 ? This is because I can't seem to find the 10/63 call out and I've only found the GP model?

05-19-2008, 12:09 PM	#33
voidfinger Registered User Join Date: May 2008 Posts: 8 Trader Rating: (0)	Well I just got my GP WASR-10/63 sidefolder from the gun shop in my home town. Pretty nice looking gun. I think i'm gonna get a standard butt to go on it though.