My pics, info and all that crap put in 1 post.

Mike82 · 05-09-2008, 09:59 AM

1) Remove rear sight base (gunsmith removed it): $30
2) Leupold Vertical-split 1" scope, 3/8" mount scope rings: $15
3) NcStar (New Century) 2-7x zoom, 32mm objective lens, 7-layer Illuminated Reticle, etc. $54/included s/h from OpticsPlanet - Best Telescopes Microscopes Sunglasses Rifle Scopes Night Vision Binoculars Flashlights Goggles & more!

Leupold scope rings model number: 55850 (Matte Black) (very low rise of .826")
Leupold scope rings that don't need modded: 56533 (Matte Black) (low rise of .96")
NcStar scope model number: SEPB2732B (Black)
Bipods: Wicks Trading Post,Optics, Shooting and Hunting Supplies

Now, for fitting:
The scope will not fit just right with those rings....the rear lens area likes to "touch" the receiver with a lil bit of force. The rings that come with scope are for weaver style rails, but they have something helpful. The inside of rings have a soft layer of "shim" to keep scope from getting scuffed by rings. If you remove the layer from the top half of one of the included rings(you wont use these cheapo rings), cut it in half shortways, so u have 2 square pieces. Now apply each piece to lower part of each half of the vertical split ring that's gonna be holding rear of scope....dont need to add any to front ring....that lil bit of shim is just enuff to raise the rear of scope about 1mm....that's just enuff so you have about enuff space between rear of scope and receiver that u can slide of piece of "ammo paper" "wax paper" w/e it is between scope and receiver without any pressure....hold the finished setup up to light and you can see it clears. This way also makes it so you can use stripper clips, and the tops of the vertical split rings make a decent "iron sights" for getting a basic lineup of a target that may be WAAAYYYYY off in the distance.

Pics of finished product:
http://www.gunandgame.com/forums/att...1.30-front.jpg
http://www.gunandgame.com/forums/att...91.30-left.jpg
http://www.gunandgame.com/forums/att...1.30-right.jpg
http://www.gunandgame.com/forums/att...1.30-scope.jpg
http://www.gunandgame.com/forums/att...paper.thin.jpg

SwedeSteve · 05-09-2008, 10:04 AM

I likes it, I do!

Mike82 · 05-09-2008, 10:05 AM

thank you very much....appreciate it.

i just got that new bolt-on bipod installed on it last night....i had a cheapo el plastico one on it, and the 'teeth' that clamped barrel(dont ask)....the small bit of muzzle heat flattened em and it slipped off....so i stuck it in bonfire yesterday

it only costs $.50 at Cummins Tool Sale....think it was made by a deaf, blind, mute chinaman, that had no arms

Ps. no offense to any deaf, blind, mute chinamen with no arms.

Capt'n Mil Coll · 05-09-2008, 11:52 AM

Hey IM a deaf blind mute chinaman with no legs. So guess I just missed it. Nice looking scope. Let me know how it is to fire that monster.

Mike82 · 05-10-2008, 07:19 AM

oh it's nice alright, the Ncstar scope really holds up well....got an extra set of vertical split scope rings, made by bushnell, if anyone is planning on doin this, holler at me.

SwedeSteve · 05-10-2008, 07:24 AM

OK, so what's your next project?

Mike82 · 05-10-2008, 08:45 AM

same thing with 91/59, then afterwards with 91/38

is this an M91/38 or just a regular M38? C&R RIFLES2

UPDATE: nevermind, i see the Tula price, that makes em M38's....cause M91/38's are czech-made

vcpilot79 · 05-10-2008, 03:01 PM

nice rifle mike!

Mike82 · 05-15-2008, 01:55 AM

ty vc

i'm proud of my work hehe

05-09-2008, 09:59 AM	#1
Mike82 Senior Member Join Date: Feb 2008 Location: Vicksburg, Mississippi USA Posts: 1,023 Images: 7	My pics, info and all that crap put in 1 post. 1) Remove rear sight base (gunsmith removed it): $30 2) Leupold Vertical-split 1" scope, 3/8" mount scope rings: $15 3) NcStar (New Century) 2-7x zoom, 32mm objective lens, 7-layer Illuminated Reticle, etc. $54/included s/h from OpticsPlanet - Best Telescopes Microscopes Sunglasses Rifle Scopes Night Vision Binoculars Flashlights Goggles & more! Leupold scope rings model number: 55850 (Matte Black) (very low rise of .826") Leupold scope rings that don't need modded: 56533 (Matte Black) (low rise of .96") NcStar scope model number: SEPB2732B (Black) Bipods: Wicks Trading Post,Optics, Shooting and Hunting Supplies Now, for fitting: The scope will not fit just right with those rings....the rear lens area likes to "touch" the receiver with a lil bit of force. The rings that come with scope are for weaver style rails, but they have something helpful. The inside of rings have a soft layer of "shim" to keep scope from getting scuffed by rings. If you remove the layer from the top half of one of the included rings(you wont use these cheapo rings), cut it in half shortways, so u have 2 square pieces. Now apply each piece to lower part of each half of the vertical split ring that's gonna be holding rear of scope....dont need to add any to front ring....that lil bit of shim is just enuff to raise the rear of scope about 1mm....that's just enuff so you have about enuff space between rear of scope and receiver that u can slide of piece of "ammo paper" "wax paper" w/e it is between scope and receiver without any pressure....hold the finished setup up to light and you can see it clears. This way also makes it so you can use stripper clips, and the tops of the vertical split rings make a decent "iron sights" for getting a basic lineup of a target that may be WAAAYYYYY off in the distance. Pics of finished product: http://www.gunandgame.com/forums/att...1.30-front.jpg http://www.gunandgame.com/forums/att...91.30-left.jpg http://www.gunandgame.com/forums/att...1.30-right.jpg http://www.gunandgame.com/forums/att...1.30-scope.jpg http://www.gunandgame.com/forums/att...paper.thin.jpg __________________ No Trespassing! Violators Will Be Shot! Survivors Will Be Shot Again!

05-09-2008, 10:04 AM	#2
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,309 Images: 1	I likes it, I do! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-09-2008, 10:05 AM	#3
Mike82 Senior Member Join Date: Feb 2008 Location: Vicksburg, Mississippi USA Posts: 1,023 Images: 7	thank you very much....appreciate it. i just got that new bolt-on bipod installed on it last night....i had a cheapo el plastico one on it, and the 'teeth' that clamped barrel(dont ask)....the small bit of muzzle heat flattened em and it slipped off....so i stuck it in bonfire yesterday it only costs $.50 at Cummins Tool Sale....think it was made by a deaf, blind, mute chinaman, that had no arms Ps. no offense to any deaf, blind, mute chinamen with no arms. __________________ No Trespassing! Violators Will Be Shot! Survivors Will Be Shot Again! Last edited by Mike82; 05-09-2008 at 10:11 AM. Reason: Automerged Doublepost

05-09-2008, 11:52 AM	#4
Capt'n Mil Coll Military Rifle Collector Join Date: Mar 2008 Location: Right behind you. -NRA Member- Posts: 2,268 Images: 10	Hey IM a deaf blind mute chinaman with no legs. So guess I just missed it. Nice looking scope. Let me know how it is to fire that monster. __________________ Let's light this fuse and see what happens!

05-10-2008, 07:19 AM	#5
Mike82 Senior Member Join Date: Feb 2008 Location: Vicksburg, Mississippi USA Posts: 1,023 Images: 7	oh it's nice alright, the Ncstar scope really holds up well....got an extra set of vertical split scope rings, made by bushnell, if anyone is planning on doin this, holler at me. __________________ No Trespassing! Violators Will Be Shot! Survivors Will Be Shot Again!

05-10-2008, 07:24 AM	#6
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,309 Images: 1	OK, so what's your next project? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-10-2008, 08:45 AM	#7
Mike82 Senior Member Join Date: Feb 2008 Location: Vicksburg, Mississippi USA Posts: 1,023 Images: 7	same thing with 91/59, then afterwards with 91/38 is this an M91/38 or just a regular M38? C&R RIFLES2 UPDATE: nevermind, i see the Tula price, that makes em M38's....cause M91/38's are czech-made __________________ No Trespassing! Violators Will Be Shot! Survivors Will Be Shot Again! Last edited by Mike82; 05-10-2008 at 11:10 AM. Reason: Automerged Doublepost

05-10-2008, 03:01 PM	#8
vcpilot79 Member Join Date: Apr 2008 Location: coastal california Posts: 49	nice rifle mike!

05-15-2008, 01:55 AM	#9
Mike82 Senior Member Join Date: Feb 2008 Location: Vicksburg, Mississippi USA Posts: 1,023 Images: 7	ty vc i'm proud of my work hehe __________________ No Trespassing! Violators Will Be Shot! Survivors Will Be Shot Again!