Modifications

Mike Franklin · 05-19-2008, 06:30 AM

What have you done to your Glock to make it fit you?
I ground off the finger groves, relieved the right bottom edge of the trigger guard and soon will take off some from the inside trigger guard along the bottom. I'll got big hands so they tell me.

just_a_car · 05-19-2008, 04:27 PM

Left everything that came with it:
-Heinie Straight Eight night sights
-Hogue Handall grip sleeve
-Pearce +1 grip/mag extension

All on a GLOCK 27.

I'm thinking of inletting the area under the right side of the trigger guard, as my right middle finger's first knuckle presses against it.

fireguy86 · 05-24-2008, 01:07 PM

Night Sights and a TLR-1 tac light. nothin special

knightRider · 05-24-2008, 01:21 PM

laser inside of the gun

fireguy86 · 05-24-2008, 05:07 PM

I would love to have a lasermax- it is a little steep tho

502adamh · 06-17-2008, 12:32 AM

Were do I start? I shoot a G34 in USPSA Limited class. It has

Hand Fit Stormlake Barrel
Wolfe Recoil Spring
Wolfe Guide Rod
Polished Contact Surfaces
Reduced Striker Spring
Trijicon Sights
3.5 lbs connector
Over travel stop
Pre travel stop
Dawson Precision Magwell
Dawson Precision Basepads
Custom Heat stippling on front strap and Back strap
Skate tape on side panels
20,000 Rounds of break in

GlockMeister · 06-17-2008, 01:23 AM

Put a set of Meprolight night sights, orange rear/ green front, a Streamlight M6 laser/light combo on the rail and most recently bought and installed a Storm Lake 4 port ported barrel. All for use on, in and with my G35 tactical/practical...Oh and FWIW, I also put a Clip-Draw on it.

mwatson · 06-24-2008, 02:52 PM

My 23 and 19 are stock. Why fix it if it aint broke.
Mike

Silent Shooter · 06-25-2008, 06:38 AM

Hand Fit Stormlake Barrel
18lb Recoil Spring
Stainless Steel Guide Rod
Polished Contact Surfaces
3.5 lbs connector
Over travel stop
10,000+ Rounds of break in

DWARREN123 · 06-25-2008, 07:00 AM

Put grip frame plugs and added pinky extensions to the 27's mags.
I don't feel I need to do anything else.

Silent Shooter · 06-25-2008, 07:30 AM

The guide rod is plastic. I just could not get used to that idea. I know, I know there are hundreds of thousands of them out in the field, but I just couldn't do it....

Otter · 06-25-2008, 01:08 PM

On my Glock Model 30 I changed the magazine caps for the finger rest style and reduced the trigger pull to 3 lbs.

GlockMeister · 06-25-2008, 01:24 PM

Quote:

Originally Posted by Silent Shooter

The guide rod is plastic. I just could not get used to that idea. I know, I know there are hundreds of thousands of them out in the field, but I just couldn't do it....

I'm thinking of replacing mine. Never heard of any problems with the stock ones. I'll probably keep it until 1., it wears out or 2., it breaks as I recently saw a picture of. What brand did you replace yours with? Have a link and if not, how much did you pay for it?

Silent Shooter · 06-25-2008, 02:11 PM

Stainless Steel Guide Rod - GlockStore.com

GlockMeister · 06-25-2008, 02:15 PM

Quote:

Originally Posted by Silent Shooter

Stainless Steel Guide Rod - GlockStore.com

Thank you very much. Much cheaper then the $74.95-$84.95 I'd found. That brand was Sprinco? I'll definately just go ahead and get that one before mine goes bad or breaks seeing as how it's very reasonably priced...Thanks again for the link.

UPDATE: Can you say ORDERED? lol Thanks again for the link Sooner. It is/was much appreciated.

Silent Shooter · 06-26-2008, 07:20 AM

Sooner?!?!?! Them there is fightin' words young man...

tonystewartfan · 06-26-2008, 06:00 PM

GLOCK MODIFICATION:

GlockMeister · 06-26-2008, 09:10 PM

^^^^^That's actually pretty cool^^^^^

Anile8er · 07-02-2008, 08:09 AM

For this gun I added a rail kit on the front for bottom and side accessories which was about $30. I added the hand grip to the rail which was another $30. I bought a red dot scope for around $50 and I did my own custom paint job for about $100 with a regular hobby spray gun. Im thinking of adding a flashlight to the side rail but I think that might be a bit much what do you guys think.

GlockMeister · 07-02-2008, 08:32 AM

Quote:

Originally Posted by GlockMeister

Put a set of Meprolight night sights, orange rear/ green front, a Streamlight M6 laser/light combo on the rail and most recently bought and installed a Storm Lake 4 port ported barrel. All for use on, in and with my G35 tactical/practical...Oh and FWIW, I also put a Clip-Draw on it.

Just added a stainless steel guide rod. Link courtesy of SilentShooter. Thanks again. Fit right in.. I'll have to give a range report at a later date.

05-19-2008, 06:30 AM	#1
Mike Franklin Senior Member Join Date: Apr 2008 Location: Poteet, Texas Posts: 1,276	Modifications What have you done to your Glock to make it fit you? I ground off the finger groves, relieved the right bottom edge of the trigger guard and soon will take off some from the inside trigger guard along the bottom. I'll got big hands so they tell me.

05-19-2008, 04:27 PM	#2
just_a_car Senior Member Join Date: Oct 2006 Location: Edmonds, WA Posts: 3,522	Left everything that came with it: -Heinie Straight Eight night sights -Hogue Handall grip sleeve -Pearce +1 grip/mag extension All on a GLOCK 27. I'm thinking of inletting the area under the right side of the trigger guard, as my right middle finger's first knuckle presses against it. __________________

05-24-2008, 01:07 PM	#3
fireguy86 Member Join Date: Jan 2008 Location: NE Colorado Posts: 89	Night Sights and a TLR-1 tac light. nothin special __________________ The militia is our ultimate safety there is no security without it but every man must be armed

05-24-2008, 01:21 PM	#4
knightRider Senior Member Join Date: Jan 2007 Location: you know where Posts: 2,683 Images: 19 Blog Entries: 11	laser inside of the gun __________________ I'm part kalishnakov, part heckler and Koch.

05-24-2008, 05:07 PM	#5
fireguy86 Member Join Date: Jan 2008 Location: NE Colorado Posts: 89	I would love to have a lasermax- it is a little steep tho __________________ The militia is our ultimate safety there is no security without it but every man must be armed

06-17-2008, 12:32 AM	#6
502adamh Member Join Date: Oct 2007 Location: Louisville, Kentucky Posts: 70	Were do I start? I shoot a G34 in USPSA Limited class. It has Hand Fit Stormlake Barrel Wolfe Recoil Spring Wolfe Guide Rod Polished Contact Surfaces Reduced Striker Spring Trijicon Sights 3.5 lbs connector Over travel stop Pre travel stop Dawson Precision Magwell Dawson Precision Basepads Custom Heat stippling on front strap and Back strap Skate tape on side panels 20,000 Rounds of break in

06-17-2008, 01:23 AM	#7
GlockMeister Senior Member Join Date: Dec 2007 Location: Northern Illinois Posts: 5,485	Put a set of Meprolight night sights, orange rear/ green front, a Streamlight M6 laser/light combo on the rail and most recently bought and installed a Storm Lake 4 port ported barrel. All for use on, in and with my G35 tactical/practical...Oh and FWIW, I also put a Clip-Draw on it. __________________ I'd rather be tried by 12 than carried by 6!

06-24-2008, 02:52 PM	#8
mwatson Senior Member Join Date: Apr 2008 Location: Rogers, Arkansas Posts: 236	My 23 and 19 are stock. Why fix it if it aint broke. Mike __________________ ..............................HOWDY

06-25-2008, 06:38 AM	#9
Silent Shooter Senior Member Join Date: Feb 2008 Posts: 292	Hand Fit Stormlake Barrel 18lb Recoil Spring Stainless Steel Guide Rod Polished Contact Surfaces 3.5 lbs connector Over travel stop 10,000+ Rounds of break in __________________ http://sosministries.phpbb-host.com/index-forum.php

06-25-2008, 07:00 AM	#10
DWARREN123 Senior Member Join Date: Jan 2004 Location: BETWEEN TN & KY Posts: 774	Put grip frame plugs and added pinky extensions to the 27's mags. I don't feel I need to do anything else. __________________ Have a nice day!

06-25-2008, 07:30 AM	#11
Silent Shooter Senior Member Join Date: Feb 2008 Posts: 292	The guide rod is plastic. I just could not get used to that idea. I know, I know there are hundreds of thousands of them out in the field, but I just couldn't do it.... __________________ http://sosministries.phpbb-host.com/index-forum.php

06-25-2008, 01:08 PM	#12
Otter Senior Member Join Date: Apr 2005 Location: Vermont Posts: 955 Images: 6	On my Glock Model 30 I changed the magazine caps for the finger rest style and reduced the trigger pull to 3 lbs. __________________ Life is too important to be taken seriously.

06-25-2008, 02:11 PM	#14
Silent Shooter Senior Member Join Date: Feb 2008 Posts: 292	Stainless Steel Guide Rod - GlockStore.com __________________ http://sosministries.phpbb-host.com/index-forum.php

06-26-2008, 07:20 AM	#16
Silent Shooter Senior Member Join Date: Feb 2008 Posts: 292	Sooner?!?!?! Them there is fightin' words young man... __________________ http://sosministries.phpbb-host.com/index-forum.php

06-26-2008, 06:00 PM	#17
tonystewartfan Senior Member Join Date: Apr 2008 Location: Southern Indiana Posts: 194	GLOCK MODIFICATION: __________________ "if guns kill people, then I can blame misspelled words on my pencil.- Larry "The Cable Guy"

06-26-2008, 09:10 PM	#18
GlockMeister Senior Member Join Date: Dec 2007 Location: Northern Illinois Posts: 5,485	^^^^^That's actually pretty cool^^^^^ __________________ I'd rather be tried by 12 than carried by 6!

07-02-2008, 08:09 AM	#19
Anile8er Registered User Join Date: Jul 2008 Posts: 2	Cx4 Storm For this gun I added a rail kit on the front for bottom and side accessories which was about $30. I added the hand grip to the rail which was another $30. I bought a red dot scope for around $50 and I did my own custom paint job for about $100 with a regular hobby spray gun. Im thinking of adding a flashlight to the side rail but I think that might be a bit much what do you guys think.