wierd.....

squirrelblaster · 03-20-2008, 07:05 PM

to got my bersa thunder back from the shop and took it to the range it functioned great! just like new, BUT when i took it home and icleaned i found that i am unable to put it back together..... now this is the bersa thunder we are talking about its not complicated, but i cant seem toget the slide back on...... what could i be doing wrong? this is wierd! im pushing the front lever when i try to do it... any help would be great!

rondog · 03-20-2008, 08:46 PM

I know the hammer has to be cocked, and you might have to pull down on the hammer a little. I don't have mine handy to check it out, but it ain't no thang to reassemble it. Basically pull the slide back until it drops down on the frame, IIRC.

CrazyIvan · 03-20-2008, 09:01 PM

http://www.bersafirearmsusa.com/pdf/manual380.pdf

See if you aren't doing it quite right. If it doesnt work as explained, call them.

squirrelblaster · 03-21-2008, 08:59 AM

well first i wanttosay thanks for the input guys! i realy apriciate it. anyways i finaly figured it out this morning, guess i needed a fresh outlook or somthing, well it turned out that the bar one the right side that you can see moving when you pull the trigger (dont know what to call it) had poped out of place a bit makeing the the gun to thick for the slide to go back on. all i had to do was snap it back into place and everything was back to normal! thanks again!

03-20-2008, 07:05 PM	#1
squirrelblaster lord of lego turtles! Join Date: Jan 2008 Location: Ohio Posts: 3,493	wierd..... to got my bersa thunder back from the shop and took it to the range it functioned great! just like new, BUT when i took it home and icleaned i found that i am unable to put it back together..... now this is the bersa thunder we are talking about its not complicated, but i cant seem toget the slide back on...... what could i be doing wrong? this is wierd! im pushing the front lever when i try to do it... any help would be great! __________________ "I like Turtles!" youtube kid

03-20-2008, 09:01 PM	#3
CrazyIvan Senior Member Join Date: Sep 2006 Location: Englewood, CO Posts: 3,413 Blog Entries: 1	http://www.bersafirearmsusa.com/pdf/manual380.pdf See if you aren't doing it quite right. If it doesnt work as explained, call them. __________________ "Minimum wage, minimum effort." "Never underestimate the power of stupidity." ~Me

03-21-2008, 08:59 AM	#4
squirrelblaster lord of lego turtles! Join Date: Jan 2008 Location: Ohio Posts: 3,493	well first i wanttosay thanks for the input guys! i realy apriciate it. anyways i finaly figured it out this morning, guess i needed a fresh outlook or somthing, well it turned out that the bar one the right side that you can see moving when you pull the trigger (dont know what to call it) had poped out of place a bit makeing the the gun to thick for the slide to go back on. all i had to do was snap it back into place and everything was back to normal! thanks again! __________________ "I like Turtles!" youtube kid

03-20-2008, 08:46 PM	#2
rondog Senior Member Join Date: Aug 2007 Location: Parker, CO Posts: 3,296	I know the hammer has to be cocked, and you might have to pull down on the hammer a little. I don't have mine handy to check it out, but it ain't no thang to reassemble it. Basically pull the slide back until it drops down on the frame, IIRC.