Highpower

Gus L. · 09-22-2002, 11:28 PM

I need to have my Highpower re-blued and barreled, Who specializes in Highpower gunsmithing?
Thanks Gents..

Gus L. · 09-30-2002, 12:56 AM

?? Any help.......??..?.?..?..zzzzzzzzzzzz

BattleRifleG3 · 09-30-2002, 08:30 AM

I think a blueing job is a blueing job. I'd find a local gunsmith that does general reblueing. If he doesn't know how to take it apart or is able to read instructions then he probably shouldn't be a gunsmith. As far as rebarreling, you can find standard, threaded, and ported barrels from FAC for the Browning Hi Power 9mm.

lefty o · 09-30-2002, 10:49 AM

no a bluing job isnt a bluing job, it takes a lot of prep work and the proper application to get a hi quality bluing. as far as rebarreling i would talk to either don williams of the action works(very nice guy), or ted yost- its my understanding these guys are both masters with the hi power and would probably fit a new barrel for you-a barsto perhaps-please dont cheap out on your barrel, you will get much better accuracy and reliability out of a properly fit barrel than you will get with a cheap one size fits all piece of tubing. oh im sure that don or ted could recomend somebody to do a quality blue job.:target:

BattleRifleG3 · 09-30-2002, 11:43 AM

Sorry for my presumption of ease, I assumed that the skills used by gunmiths would easily transfer between different guns.

lefty o · 09-30-2002, 11:51 AM

gunsmiths skills do transfer between guns, but all gunsmiths are not created equally-especially when it comes to finishes. there are smiths that can polish a turd and make it look great, and someguys can make a nice looking gun into a turd.

denfoote · 10-05-2002, 07:27 AM

Cylinder and Slide.

http://www.cylinder-slide.com/pricin...wer9mm_tun.htm

09-22-2002, 11:28 PM	#1
Gus L. Senior Member Join Date: May 2002 Posts: 121	Highpower I need to have my Highpower re-blued and barreled, Who specializes in Highpower gunsmithing? Thanks Gents..

09-30-2002, 08:30 AM	#3
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401	I think a blueing job is a blueing job. I'd find a local gunsmith that does general reblueing. If he doesn't know how to take it apart or is able to read instructions then he probably shouldn't be a gunsmith. As far as rebarreling, you can find standard, threaded, and ported barrels from FAC for the Browning Hi Power 9mm. __________________ Trust is earned, not... GIVEN away. - Worf

09-30-2002, 10:49 AM	#4
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,546	no a bluing job isnt a bluing job, it takes a lot of prep work and the proper application to get a hi quality bluing. as far as rebarreling i would talk to either don williams of the action works(very nice guy), or ted yost- its my understanding these guys are both masters with the hi power and would probably fit a new barrel for you-a barsto perhaps-please dont cheap out on your barrel, you will get much better accuracy and reliability out of a properly fit barrel than you will get with a cheap one size fits all piece of tubing. oh im sure that don or ted could recomend somebody to do a quality blue job.:target: Last edited by lefty o; 09-30-2002 at 10:52 AM.

09-30-2002, 11:43 AM	#5
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401	Sorry for my presumption of ease, I assumed that the skills used by gunmiths would easily transfer between different guns. __________________ Trust is earned, not... GIVEN away. - Worf

10-05-2002, 07:27 AM	#7
denfoote Senior Member Join Date: Apr 2002 Location: Buckeye Arizona Posts: 156	Cylinder and Slide. http://www.cylinder-slide.com/pricin...wer9mm_tun.htm __________________ I traded my manners for a handgun!!!!! :assult:

09-30-2002, 12:56 AM	#2
Gus L. Senior Member Join Date: May 2002 Posts: 121	?? Any help.......??..?.?..?..zzzzzzzzzzzz

09-30-2002, 11:51 AM	#6
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,546	gunsmiths skills do transfer between guns, but all gunsmiths are not created equally-especially when it comes to finishes. there are smiths that can polish a turd and make it look great, and someguys can make a nice looking gun into a turd.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode