Will Colt SAA parts fit my Dakota

BOOTH · 07-12-2007, 03:54 PM

Hi, I'm new here and was looking for so help. I have a Dakota SAA 45 LONG COLT pistol and was wondering if any of the Colt SAA parts would fit it and if so which gen. 1st , 2nd or 3rd . Pistol has a brass trigger guard and backstrap, left side of barrel is marked " DAKOTA CAL.45 COLT" . Top of barrel is marked " inter continental arms inc. " these is no transfer bar. Right side of frame says " made in italy". Any help would be very nice. Thanks in advance for your replys. BOOTH

Big Dog · 07-12-2007, 05:27 PM

Almost certainly NOT - but no real way to know without trying. A good gunsmith may have some Colt parts in stock to test it. Even if it's close, he might be able to fit the Colt parts to it.
SIngle-actions are made by many different companies, each a bit different. Even the same company alters their guns over time - I have two Pietta 1851 Navies, made a couple decades apart, that are totally different in manufacture, with no parts interchangeable!

BOOTH · 07-12-2007, 06:16 PM

Thanks for the reply . I'll try to see if I can locate some Colt SAA parts.

rfc357 · 07-31-2007, 08:18 PM

What parts do you need? Numrich may have them. A real gunsmith can make any part for a SAA, but try to find a real gunsmith.................................

lefty o · 07-31-2007, 09:35 PM

highly unlikely that parts from one will work in the other.

07-12-2007, 03:54 PM	#1
BOOTH Registered User Join Date: Jul 2007 Location: ARIZONA Posts: 2	Will Colt SAA parts fit my Dakota Hi, I'm new here and was looking for so help. I have a Dakota SAA 45 LONG COLT pistol and was wondering if any of the Colt SAA parts would fit it and if so which gen. 1st , 2nd or 3rd . Pistol has a brass trigger guard and backstrap, left side of barrel is marked " DAKOTA CAL.45 COLT" . Top of barrel is marked " inter continental arms inc. " these is no transfer bar. Right side of frame says " made in italy". Any help would be very nice. Thanks in advance for your replys. BOOTH

07-12-2007, 05:27 PM	#2
Big Dog Moderator Join Date: Mar 2002 Location: Tallahassee, Florida Posts: 9,843	Almost certainly NOT - but no real way to know without trying. A good gunsmith may have some Colt parts in stock to test it. Even if it's close, he might be able to fit the Colt parts to it. SIngle-actions are made by many different companies, each a bit different. Even the same company alters their guns over time - I have two Pietta 1851 Navies, made a couple decades apart, that are totally different in manufacture, with no parts interchangeable! __________________ Moderator of: AR15/M16, M14/M1A, New/Beginning Shooters and Militaria/Collectables.

07-12-2007, 06:16 PM	#3
BOOTH Registered User Join Date: Jul 2007 Location: ARIZONA Posts: 2	saa inter change Thanks for the reply . I'll try to see if I can locate some Colt SAA parts.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-31-2007, 08:18 PM	#4
rfc357 Senior Member Join Date: Jun 2006 Posts: 741	What parts do you need? Numrich may have them. A real gunsmith can make any part for a SAA, but try to find a real gunsmith.................................

07-31-2007, 09:35 PM	#5
lefty o Senior Member Join Date: Mar 2002 Location: mn Posts: 4,543	highly unlikely that parts from one will work in the other.