http://www.gunandgame.com/forums/ en Sat, 21 Nov 2009 21:34:08 GMT vBulletin 60 http://www.gunandgame.com/forums/../forums/images/misc/rss.jpg http://www.gunandgame.com/forums/ http://www.gunandgame.com/forums/savage/89783-savage-775a-12-gauge.html Wed, 18 Nov 2009 04:34:02 GMT I have a friend that has a 775A that has lost the ring patterns for his shotgun, he now doesn't know which rings go in the proper position to shoot high brass and low brass.. if anyone has the information that will resolve his issues I would appreciate the help..

please email me at desty@bellsouth.net ]]> Savage pilotpop http://www.gunandgame.com/forums/savage/89783-savage-775a-12-gauge.html http://www.gunandgame.com/forums/savage/89264-if-you-own-savage-10fp-check-one-out.html Mon, 09 Nov 2009 21:18:24 GMT I'm sure that folks have seen this rifle before...



Good rifle action, but I could not get comfortable with this stock. I had to really work at getting a good shot off. Plus, the internal magazine was slow to top off, and to exchange ammunition was a pain.

So, after a lot of soul searching and research, I contacted a gentleman named Jeff, the owner of CDI Precision Gunworks, out of Sarasota, Florida. I explained my situation to him.

Bottom line: I purchased a Choate Savage Short Action Tactical Stock, direct from Choate--along with a large cheekpiece. Hint: The large cheekpieces for the Ultimate Sniper and Ultimate Varmint stocks work, too. I sent it off to Jeff, and here's what he did:



He makes and installs bottom metal for this rifle. Now, I have a rifle that accepts the Accuracy International 5 and 10 round magazines. It feeds flawlessly, too! From what I understand, he also makes the bottom metal for other rifles as well.

Got an older Savage short action, with the 4.25 spacing between screws? Not to worry--that's what mine is! Jeff moved the hole a bit, and made it work perfectly.

Best part is the turnaround time...WELL under 2 weeks! No, that's not a typo, either! Jeff does quality work, and charges a fair price, too!

Take a look, and give him a call:

CDI Precision Gunworks - Home ]]> Savage Powderman http://www.gunandgame.com/forums/savage/89264-if-you-own-savage-10fp-check-one-out.html http://www.gunandgame.com/forums/savage/89217-springfield-mdl-67d.html Mon, 09 Nov 2009 01:49:34 GMT A few days ago I bought a .410 pump for 200 dollars I dont know much about it, except it says springfield model 67D. Any help please A few days ago I bought a .410 pump for 200 dollars I dont know much about it, except it says springfield model 67D. Any help please ]]> Savage serfp http://www.gunandgame.com/forums/savage/89217-springfield-mdl-67d.html http://www.gunandgame.com/forums/savage/88867-model-15-missfire.html Mon, 02 Nov 2009 20:10:26 GMT Recently repaired this old gun by replacing a missing firing pin. It doesn't fire when the trigger is pulled. Upon inspection of the rim of the shell I can see that the firing pin his hitting the shell. I did pull back on the cocking knob and with the trigger depressed was able to get the gun to fire ( an empty shell of course ) when I released the knob. Before I spend the $62 for a new bolt do you think the mainspring could need replacing. It has probably been used a time or two over the years. :haha:

JD ]]> Savage OODA http://www.gunandgame.com/forums/savage/88867-model-15-missfire.html http://www.gunandgame.com/forums/savage/88761-springfield-745b-savage.html Sat, 31 Oct 2009 15:04:54 GMT My dad just received an old shotgun from my grandpa that was his dads and it looks like and old browning copy that is marked Springfield 745b on the receiver and savage on the barrel. There is no serial number on the shogun at all. Does anybody know much about these shotguns or if they are safe to... My dad just received an old shotgun from my grandpa that was his dads and it looks like and old browning copy that is marked Springfield 745b on the receiver and savage on the barrel. There is no serial number on the shogun at all. Does anybody know much about these shotguns or if they are safe to fire modern steel shot through. ]]> Savage sea_chicken1 http://www.gunandgame.com/forums/savage/88761-springfield-745b-savage.html http://www.gunandgame.com/forums/savage/88760-good-alternative-stock-replace-platic-stock.html Sat, 31 Oct 2009 14:57:09 GMT Just bought a 308 SS package Savage.
Don't like the plastic stock. You can feel it bend when you put pressure on the barrel.
What would be a good replacement weatherproof stock? ]]> Savage Full MeTal Jack http://www.gunandgame.com/forums/savage/88760-good-alternative-stock-replace-platic-stock.html http://www.gunandgame.com/forums/savage/88718-mossberg-46b-b.html Sat, 31 Oct 2009 03:49:17 GMT ?:Flush: ?:Flush: ]]> Savage Plumber http://www.gunandgame.com/forums/savage/88718-mossberg-46b-b.html http://www.gunandgame.com/forums/savage/88663-new-m24-showed-up.html Fri, 30 Oct 2009 01:44:44 GMT In the local Gun Shop today. It's a 22 mag/ 20 Ga. Real nice shape. Brad hadn't put a price on it before I had to leave. I am interested. ]]> Savage SwedeSteve http://www.gunandgame.com/forums/savage/88663-new-m24-showed-up.html http://www.gunandgame.com/forums/savage/88342-need-bolt-model-86-stevens.html Sat, 24 Oct 2009 20:52:38 GMT Where can one find a bolt for the Model 86 tube fed Stevens 22 rifle? Where can one find a bolt for the Model 86 tube fed Stevens 22 rifle? ]]> Savage Dakoma http://www.gunandgame.com/forums/savage/88342-need-bolt-model-86-stevens.html