Need a little help with a red dot

Pred · 10-13-2005, 09:56 PM

Ok, my brother-in-law had a red dot mounted on his AK. He had bought one of the tri rail receiver covers from Centerfire. The box said it was a weaver style base. Ok, so I bring home the red dot cause he doesn't want it on there anymore. Now, theres a bar that runs under the ring, is that supposed to fit down inside the groove on the top of my receiver? I've never mounted a red dot before so hopefully you all will know what I'm talking about. I'm so confused.....

Anyways, if it IS supposed to fit down between it, the bar under the ring is to big for the groove on my receiver.

BattleRifleG3 · 10-13-2005, 10:23 PM

Sadly, I have no experience with scoping stamped receiver G3s. Mine uses an aluminum receiver with an integrated Weaver rail.

Pred · 10-13-2005, 10:25 PM

I thought thats what I had?

Is my rail not the same as yours?

BattleRifleG3 · 10-13-2005, 10:27 PM

Wait a sec... on second thought, if you ARE talking about the aluminum receiver, do you mean that the screw that tightens the ring onto a weaver rail is too wide for the notch in the weaver rail on your receiver? If that's the case, a new set of scope rings would be in order. If the red dot has an integrated clamp for the rail and the screws are spaced incorrectly for the notches in your receiver's weaver rail, you'll have to cut a notch to accomodate the screw in your receiver.

Normally this might void the lifetime warranty on your receiver. However, Federal Arms is out of business. Warranty Schmaranty.

Pred · 10-13-2005, 10:30 PM

Does this help?

Is that bar on the bottom of the mount supposed to fit in the groove on the base?

BattleRifleG3 · 10-13-2005, 10:33 PM

Hmm, do you know the ring size? Because if it's a standard size, you could just get another ring to fit and make sure its tightening screw is the correct size.

Pred · 10-13-2005, 10:43 PM

I don't know the ring size. How can I messure to find out? I'm just wondering if this isn't a pictinny(sp?) mount instead. I think that a weaver mount would work in a pictinny, but not the other way around because of the different groove size.

BattleRifleG3 · 10-13-2005, 11:02 PM

That is correct. Standard ring sizes are 1" and 30mm. I think there's one out there in the middle, not sure what.

Pred · 10-13-2005, 11:23 PM

Info says it's a 30mm Red Dot Spotting Scope.

BattleRifleG3 · 10-13-2005, 11:55 PM

Then there you have it. See about finding a 30mm ring and makesure the screw is the right size. That is, if that's the internal diameter of the ring and not of the objective lens/panel.

Pred · 10-14-2005, 06:43 AM

This is what someone told me...

Quote:

The problem with weaver bases is that there is no universal spec for them. Unlike 1913 specs, some weaver rails can differ. I had the same problem on one of my rails/ mounts.

BattleRifleG3 · 10-14-2005, 10:58 AM

Me too. So I machined my Weaver rail down to picatinny specs.

Pred · 10-14-2005, 11:55 AM

Well... I went to Wal-Mart(mistake), and three local gun stores/pawn shops. The three gun stores told me that what I have is a picatinny ring, and not a Weaver. To make a long story short, I can buy an Aimpoint 30mm Weaver ring for like $24.00

http://www.riflescopes.com/products/..._30mm_ring.htm

But, I don't know. The red-dot is a SPOT Mark III, I think. New they go for $150, but I can buy this one for $100, and had probably less then a 100 rounds go through the rifle while it was attached. The thing is though is my end goal is put a Bushnell Trophy 3-9x40 Mildot scope on it. However, this red-dot would go good on my future AR build..

BattleRifleG3 · 10-14-2005, 12:19 PM

Don't know what to tell ya, but it is good not to spend your money twice. How do the iron sites treat you?

Pred · 10-14-2005, 12:23 PM

Well, at 50 yards I was 3-4 inches low(I know realize I was an idiot though because I had the rear drum set to 400 meters) and like 5 inches to the left. At the time though I had no idea how to adjust the sights. I'm going to take it out this weekend and see what I can do.

silentknight · 10-14-2005, 01:58 PM

Here's the Weaver mount I use on my 870

as you can see from the pic, the slots are .140 wide, sorry I forgot to measure the depth. The square posts of my red dot measured .136 wide, so they have about 4 thousanths clearance, I think thats standard for weaver mounts. I hope this helps

Pred · 10-14-2005, 02:15 PM

I did a rough comparison last night with a flat-head screwdriver, and yeah, there's not a lot of difference, but just enough. As I posted earlier, I still don't know what I'm going to do. Not one place in town has a 30mm Weaver style ring. The best I can do is order it off of riflescopes.com and get it here by sometime next week. Or on the flip side I could just give the red-dot back to him and order a scope and mounts and get those in by next week also. I don't know, got some thinking to do I guess.

10-13-2005, 09:56 PM	#1
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	Need a little help with a red dot Ok, my brother-in-law had a red dot mounted on his AK. He had bought one of the tri rail receiver covers from Centerfire. The box said it was a weaver style base. Ok, so I bring home the red dot cause he doesn't want it on there anymore. Now, theres a bar that runs under the ring, is that supposed to fit down inside the groove on the top of my receiver? I've never mounted a red dot before so hopefully you all will know what I'm talking about. I'm so confused..... Anyways, if it IS supposed to fit down between it, the bar under the ring is to big for the groove on my receiver.

10-13-2005, 10:23 PM	#2
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	Sadly, I have no experience with scoping stamped receiver G3s. Mine uses an aluminum receiver with an integrated Weaver rail. __________________ Trust is earned, not... GIVEN away. - Worf

10-13-2005, 10:27 PM	#4
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	Wait a sec... on second thought, if you ARE talking about the aluminum receiver, do you mean that the screw that tightens the ring onto a weaver rail is too wide for the notch in the weaver rail on your receiver? If that's the case, a new set of scope rings would be in order. If the red dot has an integrated clamp for the rail and the screws are spaced incorrectly for the notches in your receiver's weaver rail, you'll have to cut a notch to accomodate the screw in your receiver. Normally this might void the lifetime warranty on your receiver. However, Federal Arms is out of business. Warranty Schmaranty. __________________ Trust is earned, not... GIVEN away. - Worf

10-13-2005, 10:33 PM	#6
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	Hmm, do you know the ring size? Because if it's a standard size, you could just get another ring to fit and make sure its tightening screw is the correct size. __________________ Trust is earned, not... GIVEN away. - Worf

10-13-2005, 11:02 PM	#8
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	That is correct. Standard ring sizes are 1" and 30mm. I think there's one out there in the middle, not sure what. __________________ Trust is earned, not... GIVEN away. - Worf

10-13-2005, 10:25 PM	#3
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	I thought thats what I had? Is my rail not the same as yours?

10-13-2005, 10:30 PM	#5
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	Does this help? Is that bar on the bottom of the mount supposed to fit in the groove on the base?

10-13-2005, 10:43 PM	#7
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	I don't know the ring size. How can I messure to find out? I'm just wondering if this isn't a pictinny(sp?) mount instead. I think that a weaver mount would work in a pictinny, but not the other way around because of the different groove size.

10-13-2005, 11:23 PM	#9
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	Info says it's a 30mm Red Dot Spotting Scope.

10-13-2005, 11:55 PM	#10
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	Then there you have it. See about finding a 30mm ring and makesure the screw is the right size. That is, if that's the internal diameter of the ring and not of the objective lens/panel. __________________ Trust is earned, not... GIVEN away. - Worf

10-14-2005, 10:58 AM	#12
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	Me too. So I machined my Weaver rail down to picatinny specs. __________________ Trust is earned, not... GIVEN away. - Worf

10-14-2005, 11:55 AM	#13
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	Well... I went to Wal-Mart(mistake), and three local gun stores/pawn shops. The three gun stores told me that what I have is a picatinny ring, and not a Weaver. To make a long story short, I can buy an Aimpoint 30mm Weaver ring for like $24.00 http://www.riflescopes.com/products/..._30mm_ring.htm But, I don't know. The red-dot is a SPOT Mark III, I think. New they go for $150, but I can buy this one for $100, and had probably less then a 100 rounds go through the rifle while it was attached. The thing is though is my end goal is put a Bushnell Trophy 3-9x40 Mildot scope on it. However, this red-dot would go good on my future AR build..

10-14-2005, 12:19 PM	#14
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,400	Don't know what to tell ya, but it is good not to spend your money twice. How do the iron sites treat you? __________________ Trust is earned, not... GIVEN away. - Worf

10-14-2005, 12:23 PM	#15
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	Well, at 50 yards I was 3-4 inches low(I know realize I was an idiot though because I had the rear drum set to 400 meters) and like 5 inches to the left. At the time though I had no idea how to adjust the sights. I'm going to take it out this weekend and see what I can do.

10-14-2005, 01:58 PM	#16
silentknight Senior Member Join Date: Jul 2004 Location: Iowa Posts: 1,125	Here's the Weaver mount I use on my 870 as you can see from the pic, the slots are .140 wide, sorry I forgot to measure the depth. The square posts of my red dot measured .136 wide, so they have about 4 thousanths clearance, I think thats standard for weaver mounts. I hope this helps __________________ Sic Vis Pacem Parabellum

10-14-2005, 02:15 PM	#17
Pred Senior Member Join Date: Aug 2005 Location: Kentucky Posts: 3,786	I did a rough comparison last night with a flat-head screwdriver, and yeah, there's not a lot of difference, but just enough. As I posted earlier, I still don't know what I'm going to do. Not one place in town has a 30mm Weaver style ring. The best I can do is order it off of riflescopes.com and get it here by sometime next week. Or on the flip side I could just give the red-dot back to him and order a scope and mounts and get those in by next week also. I don't know, got some thinking to do I guess.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode