any info on 30-06

offroader1994 · 12-10-2007, 08:05 PM

here are the markings on the rifle does anyone know who made these?
-SEARS-TED WILLIAMS-MOD. 53 CAL.30-06 SPRG-SEARS.ROEBUCK AND CO.
MOD. NO. 273.1390- -MADE IN U.S.A.\
Next to action has Ll and circle with SP in it.

Bolt action 4 in mag 1 in chamber
not a magazine just the spring with flip down door, checkered stock black plastic cab at the muzzle end of the stock.

Mooseman684 · 12-10-2007, 08:35 PM

A sears Model 53 is a Winchester Model 70 !
Rich

nathangdad · 12-10-2007, 10:16 PM

Sears contracted out to have their name put on various manufacturer's guns. They are copies with the Sears name. Ted Williams was a sports celebrity (baseball) whose name supposedly added value (or at least approval) to the gun. I'll be you have a post-64 Winchester. Check your gun against this design and I think it will be the same thing.

bigbuddy21 · 12-10-2007, 10:38 PM

a lot of the guns that sears sold was manf. by j.c. higgins.

ArkansasHunter · 12-10-2007, 10:46 PM

Mooseman would this model 70 be a pre 1964 model ?

Mooseman684 · 12-10-2007, 10:59 PM

It More than Likely is a pre-64...the serial Number, or if it has the long Mauser Type Extactor would tell me...
FYI...ALL Sears Guns with a 273.XXXXXX type number were made for Sears By Winchester.
All with a 101.XXXX number were Stevens/Savage /Springfield/Fox.
All with a 103.XXXX number were Marlins.
Rich

ArkansasHunter · 12-10-2007, 11:13 PM

Thanks feller !!! My Dad worked for Sears when I was a little tyke and the store here stocked Ted Williams guns.
My first shotgun was a Sears & Roebuck...A.H

Mooseman684 · 12-10-2007, 11:28 PM

My first Brand New Rifle was a Sears Marlin semi-auto.
I was 17 when I bought it.

offroader1994 · 12-11-2007, 04:52 AM

Hey thanks for the info i will look into the info.

rfc357 · 12-15-2007, 08:52 PM

J.C Higgins never made anything. It was a house brand Sears applied to all sorts of things.

If you show me the J.C. Higgins factory, I'll show you my autograph from Charles Daly..........

rasterman77 · 12-18-2007, 03:08 AM

273.1390 is listed as a winchester mn70 30-06 but others of it's era were called "new model 70". I would hypothesize it is the push feed, post '64 type.
That's my 2 cents.

QuanahBarber · 12-25-2007, 08:13 PM

my dad has a springfield ted williams 30 06 273.1390 can anyone tell me what this rifles valve is

Mooseman684 · 12-25-2007, 08:28 PM

Depending on Condition 250 - 350 unless it is Mint New in Box...Then a little more.
Rich

SwedeSteve · 12-28-2007, 05:46 PM

Where in the SAM HILL do you guys pull this from? It continues to amaze me! Even tho' I was the first 10 y/o in my town to completely disassemble a pre-64 30-06 down to one-piece items, I cannot regurgitate this stuff as fast as you guys do!

billy · 12-28-2007, 06:00 PM

steve,
they are brainiac gun nuts.....
it's simple really........

sunray · 12-28-2007, 08:39 PM

"...Where in the SAM HILL do you guys pull this from?..." There's a 'Cross Reference' page on the Gunparts site. Doesn't cover absolutely everything, but it's close.
Store Brand to Manufacturer Cross Reference | Numrich Gun Parts Corp. | e-GunParts.com

12-10-2007, 08:05 PM	#1
offroader1994 Member Join Date: Sep 2007 Location: east Tn. Posts: 83	any info on 30-06 here are the markings on the rifle does anyone know who made these? -SEARS-TED WILLIAMS-MOD. 53 CAL.30-06 SPRG-SEARS.ROEBUCK AND CO. MOD. NO. 273.1390- -MADE IN U.S.A.\ Next to action has Ll and circle with SP in it. Bolt action 4 in mag 1 in chamber not a magazine just the spring with flip down door, checkered stock black plastic cab at the muzzle end of the stock.

12-10-2007, 08:35 PM	#2
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,637 Images: 2	A sears Model 53 is a Winchester Model 70 ! Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-10-2007, 10:16 PM	#3
nathangdad Senior Member Join Date: Nov 2007 Posts: 2,437	Sears really did not manufacture rifles Sears contracted out to have their name put on various manufacturer's guns. They are copies with the Sears name. Ted Williams was a sports celebrity (baseball) whose name supposedly added value (or at least approval) to the gun. I'll be you have a post-64 Winchester. Check your gun against this design and I think it will be the same thing.

12-10-2007, 10:38 PM	#4
bigbuddy21 Senior Member Join Date: Nov 2007 Location: new albany in. Posts: 973 Images: 5	a lot of the guns that sears sold was manf. by j.c. higgins. __________________ LAND OF THE FREE BECAUSE OF THE BRAVE!

12-10-2007, 10:59 PM	#6
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,637 Images: 2	It More than Likely is a pre-64...the serial Number, or if it has the long Mauser Type Extactor would tell me... FYI...ALL Sears Guns with a 273.XXXXXX type number were made for Sears By Winchester. All with a 101.XXXX number were Stevens/Savage /Springfield/Fox. All with a 103.XXXX number were Marlins. Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-10-2007, 10:46 PM	#5
ArkansasHunter Senior Member Join Date: Mar 2007 Location: South Arkansas Posts: 10,678	Mooseman would this model 70 be a pre 1964 model ?

12-10-2007, 11:13 PM	#7
ArkansasHunter Senior Member Join Date: Mar 2007 Location: South Arkansas Posts: 10,678	Thanks feller !!! My Dad worked for Sears when I was a little tyke and the store here stocked Ted Williams guns. My first shotgun was a Sears & Roebuck...A.H

12-10-2007, 11:28 PM	#8
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,637 Images: 2	My first Brand New Rifle was a Sears Marlin semi-auto. I was 17 when I bought it. __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-11-2007, 04:52 AM	#9
offroader1994 Member Join Date: Sep 2007 Location: east Tn. Posts: 83	Hey thanks for the info i will look into the info.

12-15-2007, 08:52 PM	#10
rfc357 Senior Member Join Date: Jun 2006 Posts: 741	J.C Higgins never made anything. It was a house brand Sears applied to all sorts of things. If you show me the J.C. Higgins factory, I'll show you my autograph from Charles Daly..........

12-18-2007, 03:08 AM	#11
rasterman77 Senior Member Join Date: Dec 2007 Location: B.C. Canada Posts: 298	273.1390 is listed as a winchester mn70 30-06 but others of it's era were called "new model 70". I would hypothesize it is the push feed, post '64 type. That's my 2 cents.

12-25-2007, 08:13 PM	#12
QuanahBarber Registered User Join Date: Dec 2007 Posts: 1	my dad has a springfield ted williams 30 06 273.1390 can anyone tell me what this rifles valve is

12-25-2007, 08:28 PM	#13
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 9,637 Images: 2	Depending on Condition 250 - 350 unless it is Mint New in Box...Then a little more. Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-28-2007, 05:46 PM	#14
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,266 Images: 1	Where in the SAM HILL do you guys pull this from? It continues to amaze me! Even tho' I was the first 10 y/o in my town to completely disassemble a pre-64 30-06 down to one-piece items, I cannot regurgitate this stuff as fast as you guys do! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

12-28-2007, 06:00 PM	#15
billy spiritual counselor Join Date: Jul 2006 Location: a secret lab on the shores of lake titicaca Posts: 11,954 Images: 9 Blog Entries: 146	steve, they are brainiac gun nuts..... it's simple really........ __________________ just leave britney ALONE! she's going thru a hard time snivel sniff....WAH

12-28-2007, 08:39 PM	#16
sunray Banned Join Date: Jul 2006 Posts: 98	"...Where in the SAM HILL do you guys pull this from?..." There's a 'Cross Reference' page on the Gunparts site. Doesn't cover absolutely everything, but it's close. Store Brand to Manufacturer Cross Reference \| Numrich Gun Parts Corp. \| e-GunParts.com