[RackHunter]

Quote:       Originally Posted by jmp8927

I would do it myself in a heartbeat. Measure a double stack mag and figure out how much you need to remove, mark it accordingly, then cut it out a little tight and then sand it smooth. Make sure you go a little tight to start with so you can continue to adjust it until it fits the way you like it. That's one reason I like doing it myself. I can get it just the way I want it.

Yea but I guess there is more to it like staying legal with so many foreign parts or something so I dont wanna screw it up LOL

[BarryHalls]

Quote:       Originally Posted by RackHunter

Yea but I guess there is more to it like staying legal with so many foreign parts or something so I dont wanna screw it up LOL

don't worry so much about that, it's only illegal if you actually put a 11+rd mag in it before you convert the rest of the weapon.

I like the sound of customizing the fit. I would also like to bevel the mag well to it guides the mag in better. . . hmmm.. . .

[Wildcat75]

Quote:       Originally Posted by RackHunter

Trying to locate any aftermarket magazines for this new rifle I bought. It is a Zastava 7.62 P.A.P imported by EAA. They are made in Serbia. I know the EAA website has them but only in 10rd magazines. I was wanting a 5 round for hunting. Also any other comments or suggestions on this rifle are appreciated.

Just got two single stack mags from Centerfire Systems, Inc. - Your Home For Ammo, Firearms, Magazines, and Gun Accessories. Identified as WASR10 surplus. Fits Zastava PAP.
$12.99 each at AK-47 10rd Single Stack Black Magazine
Plastic mags from EAA are crappy and cost $45.

5 round single stack WASR10 mags are available from gunboker and other web sites.

EAA does not answer e-mails and it takes two days for them to call you back.

Any cleaning rod for standard 16" barrels will fit. The one I got is 15 3/4". Had to take the handguard off to push it in place. Looks a lot better.

Silver Bear ammo looks good enough for photo shoot.

Advanced Technology (ATI) SKS/AK Rifle Sling is a perfect fit.

[Sprout47]

So these are imported single stack?

I agree with Moose that it is nice to see some new imports aside from Saiga's.

If I see one of these out and about I may have to pick one up.

Post a range report when you can OP

[RackHunter]

Quote:       Originally Posted by Wildcat75

Just got two single stack mags from Centerfire Systems, Inc. - Your Home For Ammo, Firearms, Magazines, and Gun Accessories. Identified as WASR10 surplus. Fits Zastava PAP. $12.99 each at AK-47 10rd Single Stack Black Magazine Plastic mags from EAA are crappy and cost $45. 5 round single stack WASR10 mags are available from gunboker and other web sites. EAA does not answer e-mails and it takes two days for them to call you back. Any cleaning rod for standard 16" barrels will fit. The one I got is 15 3/4". Had to take the handguard off to push it in place. Looks a lot better. Silver Bear ammo looks good enough for photo shoot. Advanced Technology (ATI) SKS/AK Rifle Sling is a perfect fit.

Thanks a ton!!!!!!!!!!

Quote:       Originally Posted by Sprout47

So these are imported single stack? Post a range report when you can OP

EAA imports them from Serbia. and Yes I will post a range report as soon as I get to shoot it. It has been nasty weather here the last few weeks but should get to go shoot it soon.

[Wildcat75]

Quote:       Originally Posted by RackHunter

Trying to locate any aftermarket magazines for this new rifle I bought. It is a Zastava 7.62 P.A.P imported by EAA. They are made in Serbia. I know the EAA website has them but only in 10rd magazines. I was wanting a 5 round for hunting. Also any other comments or suggestions on this rifle are appreciated.

Did you try putting a scope on it? I have a serious concern about dust cover mount holding a zero. Mine appears to be sturdy, not really sure if it will remain sturdy after couple hundred rounds and multiple removals.

[jmp8927]

Serbian...that's interesting. Wonder what level of quality they have....night be my next buy. I'm almost missing my WASR-10.

[Sprout47]

Quote:       Originally Posted by jmp8927

Serbian...that's interesting. Wonder what level of quality they have....night be my next buy. I'm almost missing my WASR-10.

I am hearing they are better than the kit built Yugo's running around, which that's what Serbia was a part of before they just got lucky enough to have the AK factories within their territory

[RackHunter]

Quote:       Originally Posted by Wildcat75

Just got two single stack mags from Centerfire Systems, Inc. - Your Home For Ammo, Firearms, Magazines, and Gun Accessories. Identified as WASR10 surplus. Fits Zastava PAP. $12.99 each at AK-47 10rd Single Stack Black Magazine Plastic mags from EAA are crappy and cost $45. 5 round single stack WASR10 mags are available from gunboker and other web sites. EAA does not answer e-mails and it takes two days for them to call you back. Any cleaning rod for standard 16" barrels will fit. The one I got is 15 3/4". Had to take the handguard off to push it in place. Looks a lot better. Silver Bear ammo looks good enough for photo shoot. Advanced Technology (ATI) SKS/AK Rifle Sling is a perfect fit.

I ordered one magazine from Centerfire systems like you said and it was a perfect fit. Also they sent a cleaning kit for it for free. Thanks a lot Bro!

[RackHunter]

Quote:       Originally Posted by Sprout47

So these are imported single stack? I agree with Moose that it is nice to see some new imports aside from Saiga's. If I see one of these out and about I may have to pick one up. Post a range report when you can OP

All I can say is awesome. I used Silver Bear ammo and shot at 100 yards. Grouping was about three inches with open sights standing and about 1 1/2 inches sitting and using a rest. I was very happy. Shot about 60 rounds through it and not one problem. Every round feed perfect. I shot a Romanian AK about 2 months ago, but I thought this Zastava shot a lot better.

[War Hammer]

Quote:       Originally Posted by RackHunter

Trying to locate any aftermarket magazines for this new rifle I bought. It is a Zastava 7.62 P.A.P imported by EAA. They are made in Serbia. I know the EAA website has them but only in 10rd magazines. I was wanting a 5 round for hunting. Also any other comments or suggestions on this rifle are appreciated.

Rackhunter, where are you hunting? Texas does not have a restriction on how many rounds you can have in your rifle while hunting. So, unless you just want a smaller mag to avoid catching it on stuff, you don't need to worry about finding a five-rounder. If you still want a short, five-rounder, Military Gun Supply in Ft. Worth always has a couple of single stack fivers on their shelf.

[Wildcat75]

Quote:       Originally Posted by RackHunter

I ordered one magazine from Centerfire systems like you said and it was a perfect fit. Also they sent a cleaning kit for it for free. Thanks a lot Bro!

You are very welcome. I got cleaning kit at no charge as well. Looks like eastern bloc military surplus.
Too bad Zastava removed side rail from PAP. I'm thinking about 4x compact scope and not sure if receiver cover is stable enough to retain zero.
Do you know if there are any 15 round single stack mags available? Here in NJ 15 is the legal maximum.

[RackHunter]

Quote:       Originally Posted by Wildcat75

You are very welcome. I got cleaning kit at no charge as well. Looks like eastern bloc military surplus. Too bad Zastava removed side rail from PAP. I'm thinking about 4x compact scope and not sure if receiver cover is stable enough to retain zero. Do you know if there are any 15 round single stack mags available? Here in NJ 15 is the legal maximum.

I have been looking, but have yet to find a 15rd single stack. If I do I will let you know. Thanks again.

[RackHunter]

Quote:       Originally Posted by War Hammer

Rackhunter, where are you hunting? Texas does not have a restriction on how many rounds you can have in your rifle while hunting. So, unless you just want a smaller mag to avoid catching it on stuff, you don't need to worry about finding a five-rounder. If you still want a short, five-rounder, Military Gun Supply in Ft. Worth always has a couple of single stack fivers on their shelf.

I was told there was a limit at Lake Meredith area which is where I do most of my hunting. Not sure if thats true I will have to research it I guess. Thanks

[War Hammer]

Quote:       Originally Posted by RackHunter

I was told there was a limit at Lake Meredith area which is where I do most of my hunting. Not sure if thats true I will have to research it I guess. Thanks

Even in a National Recreation Area, the firearms laws are dictated by the state you are in. There are no legal rifle capacity limits in Texas... period. The Lake Meridith website even links to the Texas Penal Code to answer and questions about what costitues a legal firearm. While there are no capacity limits for rifles, shotguns are restricted to no more than 3 shells for some species.

From TX Parks and Wildlife: (Link)

Quote:      

Magazine Capacity (number of shells/cartridges allowed): There are no restrictions on the number of shells or cartridges a legal firearm may hold when hunting game animals or game birds (except migratory game birds, see Legal Shotgun).

All that being said, many LEOs don't actually know the law they are paid to enforce. They simply shoot from the hip (hopefully figuratively) and then let the local judge sort out their ham-handed actions. When it comes to gun laws, this goes double. Never ask a cop about legal issues, they are rarely any more informed than you are.

[jmp8927]

^Unless you can find the Police chief. Sometimes they're good with that stuff. Other times they're just a bully...

[RackHunter]

Quote:       Originally Posted by War Hammer

Even in a National Recreation Area, the firearms laws are dictated by the state you are in. There are no legal rifle capacity limits in Texas... period. The Lake Meridith website even links to the Texas Penal Code to answer and questions about what costitues a legal firearm. While there are no capacity limits for rifles, shotguns are restricted to no more than 3 shells for some species. From TX Parks and Wildlife: (Link) All that being said, many LEOs don't actually know the law they are paid to enforce. They simply shoot from the hip (hopefully figuratively) and then let the local judge sort out their ham-handed actions. When it comes to gun laws, this goes double. Never ask a cop about legal issues, they are rarely any more informed than you are.

Quote:       Originally Posted by jmp8927

^Unless you can find the Police chief. Sometimes they're good with that stuff. Other times they're just a bully...

LOL actually my dad is the Police Chief here. Thanks guys I appreciate all the input really. Keep it coming.

[Emots]

Just bought this as my first gun ever, excited to get it shipped to me next week.
Couple questions: towards the tip of the under side of the barrel, is that a bayonet lug or strap mount spot?
Is the inside of the barrel threaded to accept a flash supressor?
If both yes than I've got one to sell because it's not legal in NJ

I'm really hoping it is because I'm excited to get it.

Also does anyone know what quad rail system fits? And can you provide a link to one please.

[War Hammer]

Quote:       Originally Posted by Emots

Just bought this as my first gun ever, excited to get it shipped to me next week. Couple questions: towards the tip of the under side of the barrel, is that a bayonet lug or strap mount spot? Is the inside of the barrel threaded to accept a flash supressor? If both yes than I've got one to sell because it's not legal in NJ I'm really hoping it is because I'm excited to get it. Also does anyone know what quad rail system fits? And can you provide a link to one please.

Congrats on buying your first gun! Start saving more money now... you'll soon want another, and another and another...

No bayonet lug. This gun has been "Clintonized" to conform to the now non-applicable Assault Weapons Ban. That's also why it accepts only low-capacity, single-stack mags and has a thumbhole (read "no pistol grip) stock. The bump you see at the front of the rifle is to hold the tip of the cleaning rod (which appears not to be included, but you can get them pretty easily).

Threads for a flash suppressor would be on the outside, never the inside of the barrel. Along with the other AWB conforming features, this rifle will either have no barrel threads, or will have a cap welded in place over the threads.

You should be fine with this rifle in NJ, as long as you don't do anything to un-neuter it. I really feel for you guys who have to jump through such hoops to stay "legal" while excercising your Constitutional rights.

As for the quad-rail. I'd go with a UTG rail for this rifle. They're cheap (about $70) and surprisingly well built.

[Emots]

Quote:       Originally Posted by War Hammer

Congrats on buying your first gun! Start saving more money now... you'll soon want another, and another and another... No bayonet lug. This gun has been "Clintonized" to conform to the now non-applicable Assault Weapons Ban. That's also why it accepts only low-capacity, single-stack mags and has a thumbhole (read "no pistol grip) stock. The bump you see at the front of the rifle is to hold the tip of the cleaning rod (which appears not to be included, but you can get them pretty easily). Threads for a flash suppressor would be on the outside, never the inside of the barrel. Along with the other AWB conforming features, this rifle will either have no barrel threads, or will have a cap welded in place over the threads. You should be fine with this rifle in NJ, as long as you don't do anything to un-neuter it. I really feel for you guys who have to jump through such hoops to stay "legal" while excercising your Constitutional rights. As for the quad-rail. I'd go with a UTG rail for this rifle. They're cheap (about $70) and surprisingly well built.

Warhammer, THANK YOU for the fast response and answering everything I've been worrying over.