12-20-2007, 04:29 PM
| #2 |
| Senior Member  Join Date: Dec 2006
Posts: 5,087
| The 10mm is zippy enough if I stay within SAMMI specs.one nice little cartridge. sam. |
|  |
|
12-20-2007, 06:14 PM
| #3 |
| Senior Member  Join Date: Oct 2006 Location: Edmonds, WA
Posts: 3,504
| If and when I start handloading and if and when I buy a 10mm, I'll likely stay well within specs in the manuals and likely be using a Tanfolio/EAA Witness with full-metal frame (I don't like the look of the plastic frames, even though I love my GLOCK).
__________________  |
|
| |
|
12-20-2007, 09:56 PM
| #4 |
| Senior Member  Join Date: Jun 2004 Location: AL
Posts: 1,661
| Just go to osCommerce to get the hot stuff - not worth blowing up your gun or hand trying to max it out. I regret getting rid of my Glock 20. I plan on rectifying that mistake one day. |
|
| |
|
12-20-2007, 10:06 PM
| #5 |
| Registered User Join Date: Mar 2007 Location: P.A.
Posts: 6
| I'd leave any cartridge as the SAAMI specs say they should be left at. No need to go blowing up the the gun or worse, yourself! |
|
| |
|
12-21-2007, 08:10 PM
| #6 |
| Senior Member Join Date: Nov 2007 Location: Las Vegas, NV
Posts: 399
| If you do decide to go hotter than recommend loads. I would recommend going with a stiffer spring to handle the recoil so the frame doesn't absorb the abuse and wear out before it's time. If it is in a revolver you might be ok. I would just be very careful and start loading up in half grain incroments and watch for pressure signs. if they get to hot you might have problems with extraction and could damage the extractor. I think it would be wise to stay within SAAMI parameters. If you are looking for a fast round to shoot out of your 10mm maybe you should look into the 9X25 dillon. It's a 10mm case necked down to take a 9mm bullet and it's a screamer. Similar to the .357 sig with the 40 case necked down to 9mm and the 400 corbon being .45acp necked down to .40cal. All you would need is a barrel and a set of dies and you would be set. Scott Last edited by Palladin8; 12-21-2007 at 08:13 PM. Reason: wanted to add more content |
|
| |
|
12-30-2007, 05:46 AM
| #7 |
| Bullet Maintenance !!  | I'm not looking to blow myself up! Just wondered if someone had played with this round and found an accurate load that uses it's potential.
__________________ Thank God we don't get as much Government as we pay for! -Will Rogers |
|
| |
|
12-30-2007, 11:19 AM
| #8 |
| Super Moderator   | Steve, Do you have a 10mm ??? I have a lot of OF Brass for you if you do... Rich
__________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!  |
| |
|
12-30-2007, 03:42 PM
| #10 |
| Super Moderator | No, I'm just gonna give it to you for free....I have probably a couple hundred...most are nickel plated ! I'll pay you for the .338 federal Ammo... Rich
__________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM! |
|
| |
