My new Hi-Point 995TS

rwt101 · 09-22-2009, 09:01 PM

My new 995TS that I just got. I have not been to the range with it yet. But it feels good and looks good. 9mm 10 round mag. Red Dot scope and I had 2 scope rings so I mounted a led light and a laser that I had.
Bob T

tommy · 09-22-2009, 11:04 PM

your setup looks almost identical to mine but i have the light and the laser in oposite spots.nice guns ain't they?

rwt101 · 09-22-2009, 11:10 PM

I may change mine around. I will see how it works out. I will be glad when I can get to the range and get to try it out.
Bob T

tommy · 09-22-2009, 11:16 PM

make sure to maybe put a little rag in between your face and the stock cause that little 995ts give a nice "beyatch slap" when you shoot her.

rwt101 · 09-22-2009, 11:21 PM

Is it actually the recoil or is it twisting?
Bob T

tommy · 09-22-2009, 11:28 PM

don't know all i did was shot a few mags out of her to sight in the redot and mess around . i do know that it gives a nice little sting to your cheek i don't recall my other two carbines the 995/4095 doing it.

rwt101 · 09-22-2009, 11:31 PM

Well I guess I will find out at the range. Thanks for the warning.
Bob T

tommy · 09-22-2009, 11:51 PM

i bet that gun would leave a nasty strawberry cheek on a cold day.lol

collector1948 · 09-23-2009, 04:40 PM

Looks good, I did mine a little different, I co-witnessed my factory sight with the red dot, I also modified the factory swivels by grinding off the sling loops and added Vulcan swivels so I could use my tactical sling. I also coated the receiver cover with ceramic engine paint, to get rid of the funky looking factory finish........having problems getting pics up on this site or I would share it

rwt101 · 09-23-2009, 05:09 PM

I wanted to leave my factory sights on, but the rail lock was in the way just enough that I could not get the red dot on. . Also what color did you use on the receiver?
Bob T

tommy · 09-23-2009, 06:47 PM

i too want to see some pictures of the paintjob. as for as the reddot i always use my front sight to line it up and so far the guns i have put them on they all seem to be dead on by doing it that way.

collector1948 · 09-23-2009, 06:53 PM

I had a Tru Glo 30mm, from an earlier project that fit without any problem. If I could figure out how to send pics, I'm having a problem on this site, I would post it...........I coated the cover with semi gloss Dupli-color semi gloss ceramic engine paint. I also have a 995 that I used VHT Hi-Temp wrinkle finish paint on the cover. So far both have been very durable, but then again I am very anile when it comes to taking care of my firearms.

LiveToShoot · 09-23-2009, 07:01 PM

If you're a newcomer to the world of Hi-Point, welcome aboard...

...and, if this is a follow-on Hi-Point purchase, good job!

Hope to read about how it shoots for you on the range...

tommy · 09-23-2009, 07:14 PM

go to imageshack or photo bucket and upload them there then you can post them in here.i use image shack and it's pretty easy

collector1948 · 09-23-2009, 07:51 PM

My 995 TS

995

ok figured out the pic thing, duh, and I yell at the "kids" at work for being stupid...........lol

The 995 has a 4x32 scope and a green laser which works out to 100 yds in the daylight.

The TS has a red dot sight that is co witnessed with the factory sights and also is dead on.

I've run a few hundred rounds through the 995 and it is an accurate little carbine.

The TS has only had about 50 rds. but it is just as accurate as it's little brother, you gotta love these for they are the most fun and bang for the buck...........

rwt101 · 09-23-2009, 08:12 PM

They both look great. It looks like your red dot sits a little higher than mine. Mine was hitting the rail lock in the front. I like receiver also.
Bob T

Freedom-1911 · 09-29-2009, 11:23 PM

In shooting the TS. Have you had any problems with the stock slaping or pinching you any?

tommy · 09-29-2009, 11:26 PM

yea dat ole 995ts will let you know who you got in your hands and who's the boss. you get cocky with her ahd shee gonna bee-yatch slap yo butt.

rwt101 · 09-29-2009, 11:55 PM

Mine did pinch some. After shooting a while it stopped. I almost think it is the separation between the cheek rest and the stock.
Bob T

collector1948 · 10-03-2009, 03:14 PM

No problems so far getting slapped, but with the red dot, I don't really need a "hard" cheek weld...........

09-22-2009, 09:01 PM	#1
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	My new Hi-Point 995TS My new 995TS that I just got. I have not been to the range with it yet. But it feels good and looks good. 9mm 10 round mag. Red Dot scope and I had 2 scope rings so I mounted a led light and a laser that I had. Bob T Attached Thumbnails __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

09-22-2009, 11:04 PM	#2
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	your setup looks almost identical to mine but i have the light and the laser in oposite spots.nice guns ain't they? __________________ [SIGPIC][/SIGPIC]

09-22-2009, 11:10 PM	#3
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	I may change mine around. I will see how it works out. I will be glad when I can get to the range and get to try it out. Bob T __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

09-22-2009, 11:16 PM	#4
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	make sure to maybe put a little rag in between your face and the stock cause that little 995ts give a nice "beyatch slap" when you shoot her. __________________ [SIGPIC][/SIGPIC]

09-22-2009, 11:21 PM	#5
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	Is it actually the recoil or is it twisting? Bob T __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

09-22-2009, 11:28 PM	#6
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	don't know all i did was shot a few mags out of her to sight in the redot and mess around . i do know that it gives a nice little sting to your cheek i don't recall my other two carbines the 995/4095 doing it. __________________ [SIGPIC][/SIGPIC]

09-22-2009, 11:31 PM	#7
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	Well I guess I will find out at the range. Thanks for the warning. Bob T __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

09-22-2009, 11:51 PM	#8
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	i bet that gun would leave a nasty strawberry cheek on a cold day.lol __________________ [SIGPIC][/SIGPIC]

09-23-2009, 04:40 PM	#9
collector1948 Member Join Date: Jan 2008 Location: under the radar Posts: 58	995 ts Looks good, I did mine a little different, I co-witnessed my factory sight with the red dot, I also modified the factory swivels by grinding off the sling loops and added Vulcan swivels so I could use my tactical sling. I also coated the receiver cover with ceramic engine paint, to get rid of the funky looking factory finish........having problems getting pics up on this site or I would share it

09-23-2009, 05:09 PM	#10
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	I wanted to leave my factory sights on, but the rail lock was in the way just enough that I could not get the red dot on. . Also what color did you use on the receiver? Bob T __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

09-23-2009, 06:47 PM	#11
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	i too want to see some pictures of the paintjob. as for as the reddot i always use my front sight to line it up and so far the guns i have put them on they all seem to be dead on by doing it that way. __________________ [SIGPIC][/SIGPIC]

09-23-2009, 06:53 PM	#12
collector1948 Member Join Date: Jan 2008 Location: under the radar Posts: 58	995ts I had a Tru Glo 30mm, from an earlier project that fit without any problem. If I could figure out how to send pics, I'm having a problem on this site, I would post it...........I coated the cover with semi gloss Dupli-color semi gloss ceramic engine paint. I also have a 995 that I used VHT Hi-Temp wrinkle finish paint on the cover. So far both have been very durable, but then again I am very anile when it comes to taking care of my firearms.

09-23-2009, 07:01 PM	#13
LiveToShoot 28 Principles of Liberty Join Date: Oct 2007 Location: SE IDAHO Posts: 4,789	If you're a newcomer to the world of Hi-Point, welcome aboard... ...and, if this is a follow-on Hi-Point purchase, good job! Hope to read about how it shoots for you on the range... __________________ "Happiness is not the absence of conflict, but the ability to cope with it." -Unknown

09-23-2009, 07:14 PM	#14
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	go to imageshack or photo bucket and upload them there then you can post them in here.i use image shack and it's pretty easy __________________ [SIGPIC][/SIGPIC]

09-23-2009, 07:51 PM	#15
collector1948 Member Join Date: Jan 2008 Location: under the radar Posts: 58	My 995 TS 995 ok figured out the pic thing, duh, and I yell at the "kids" at work for being stupid...........lol The 995 has a 4x32 scope and a green laser which works out to 100 yds in the daylight. The TS has a red dot sight that is co witnessed with the factory sights and also is dead on. I've run a few hundred rounds through the 995 and it is an accurate little carbine. The TS has only had about 50 rds. but it is just as accurate as it's little brother, you gotta love these for they are the most fun and bang for the buck........... Last edited by collector1948; 09-23-2009 at 07:59 PM.

09-23-2009, 08:12 PM	#16
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	They both look great. It looks like your red dot sits a little higher than mine. Mine was hitting the rail lock in the front. I like receiver also. Bob T __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

09-29-2009, 11:23 PM	#17
Freedom-1911 Member Join Date: Sep 2009 Posts: 39	In shooting the TS. Have you had any problems with the stock slaping or pinching you any?

09-29-2009, 11:26 PM	#18
tommy Senior Member Join Date: Mar 2002 Location: schriever la Posts: 4,846 Images: 6	yea dat ole 995ts will let you know who you got in your hands and who's the boss. you get cocky with her ahd shee gonna bee-yatch slap yo butt. __________________ [SIGPIC][/SIGPIC]

09-29-2009, 11:55 PM	#19
rwt101 Senior Member Join Date: Oct 2008 Location: Pigeon Forge, TN Posts: 516	Mine did pinch some. After shooting a while it stopped. I almost think it is the separation between the cheek rest and the stock. Bob T __________________ I'M IN MY OWN LITTLE WORLD AND EVERYONE IN HERE LIKES ME

10-03-2009, 03:14 PM	#20
collector1948 Member Join Date: Jan 2008 Location: under the radar Posts: 58	No problems so far getting slapped, but with the red dot, I don't really need a "hard" cheek weld...........