lets see your m14/m1a

MJ11 · 05-06-2009, 12:41 PM

03****

...MJ...

Mosin Shooter · 07-27-2009, 07:24 PM

you guys gotta stop. I take one noble venture outside of the Mosin forum, and now I find myself craving an M14....oh well i could do FARRR worse than an M14.

Rifle_Shaman · 08-15-2009, 05:21 AM

Hows the supply for these guns in your parts? My local guy told me the back order is so long i should just forget it. Hes usually a very up beat and enthusiastic fellow too

wunhunglo · 08-15-2009, 05:28 AM

The best things is life are worth waiting for!!

A phone call to the major suppliers/makers should get you that information.

Rex Kramer · 08-15-2009, 08:10 AM

Most of my pictures were lost, but here are two that I salvaged.

Crazy Horse Mk14 SEI Mod 0

MK14 SEI Mod 1

The YouTube video

.

madcratebuilder · 08-22-2009, 08:41 AM

Quote:

Originally Posted by Rifle_Shaman

Hows the supply for these guns in your parts? My local guy told me the back order is so long i should just forget it. Hes usually a very up beat and enthusiastic fellow too

No shortage of M1A's around here. Plenty of them on Gunbroker and the like. I see some good deals on the gun boards. With the poor economy people are selling extra toys.

Rex Kramer · 08-22-2009, 08:47 AM

Crazy Horse M21A5 EBR

Rex Kramer · 09-10-2009, 11:10 AM

nighthawk80 · 09-10-2009, 11:38 AM

How do you like the reverse rail for the scope? I have a scout mount on mine and was wondering how well that might work for me.

Rex Kramer · 09-10-2009, 04:05 PM

Quote:

Originally Posted by nighthawk80

How do you like the reverse rail for the scope? I have a scout mount on mine and was wondering how well that might work for me.

That's not a reverse rail, it's LaRue's LT-608 with SEI's Wire EDM 30mm LOW Rings.
The LT-608 is made specifically for the SAGE EBR and it does not use the stripper clip guide.

I like it

nighthawk80 · 09-11-2009, 11:17 AM

Quote:

Originally Posted by Rex Kramer

That's not a reverse rail, it's LaRue's LT-608 with SEI's Wire EDM 30mm LOW Rings.
The LT-608 is made specifically for the SAGE EBR and it does not use the stripper clip guide.

I like it

Oh. Would it work on the Scout rail? I have the scout version and was considering adding a traditional scope. Also, does the scope mount help protect the scope from the brass?

Also, I could not find it listed on thier website. What is the price for the mount? Thanks!

Rex Kramer · 09-11-2009, 11:57 AM

Quote:

Originally Posted by nighthawk80

Oh. Would it work on the Scout rail? I have the scout version and was considering adding a traditional scope. Also, does the scope mount help protect the scope from the brass?
Also, I could not find it listed on thier website. What is the price for the mount? Thanks!

It's made for the SAGE EBR and it will not work on the scout mount because
that mount sits much farther forward of the receiver.
I think it's $170.00, you need to call the good folks at LaRue.
I use a breech shield and it protects the scope as well as my eyes and face.

GlockMeister · 09-11-2009, 12:12 PM

Quote:

Originally Posted by M14man

It is a real and legal full auto. Really!!
I was able to alter my M1A in 1985 when one could still do so.They closed that door the year after.

Does that make yours/it non transferable then M14man? Know nothing about that aspect of owning firearms...

And to ALL you M14, SOCOM or M1A owners, THANKS A FRIGGIN' LOT. LOL

thrillbilly · 09-15-2009, 03:49 PM

This thread is like showing a starvin' man pics of a loaded buffet! My wife might hurt ya'll...I've had a M1A bug my whole life, and ya'll aint helpin'!

M14man · 09-15-2009, 08:22 PM

Quote:

Originally Posted by GlockMeister

Does that make yours/it non transferable then M14man? Know nothing about that aspect of owning firearms...

It means I have to sell it to a class 3 dealer or to one who has filled out the proper forms and had been Ok'd by BATF to take it. Prior to '86 you could make new machine guns, or alter semi's to full auto. After '86 you no longer could make new machineguns except to sell to Law Enforcement, nor could you get approval to alter. (Not completely understanding what you ment...) Anotherwords it is a legally titled and owned machinegun that would have to be sold to those approved to accept a machinegun.

Rex Kramer · 09-22-2009, 05:04 PM

M21A5/RRM

MJ11 · 10-12-2009, 12:02 PM

'81 NM/M21

Deersniper · 10-12-2009, 12:40 PM

Quote:

Originally Posted by Rex Kramer

Crazy Horse M21A5 EBR

Dang, nice pictures folks, #67 & 68 has got me drooling for one. How heavy it that beauty?
I'm now guilty of coveting someones good looking babe. The butt stocks rock on those.

Rex Kramer · 10-13-2009, 04:32 PM

Quote:

Originally Posted by Deersniper

Dang, #67 & 68 has got me drooling for one. How heavy it that beauty?
I'm now guilty of coveting someones good looking babe. The butt stocks rock on those.

About 13 lbs. without ammo & the suppressor.

2dogs · 11-08-2009, 09:20 PM

my Polytech M1A,,,SEMPER FI

07-27-2009, 07:24 PM	#62
Mosin Shooter Senior Member Join Date: Jan 2008 Location: I don't know where I am, but I know where you are. Posts: 615	you guys gotta stop. I take one noble venture outside of the Mosin forum, and now I find myself craving an M14....oh well i could do FARRR worse than an M14. __________________ 1939 Tula M91/30 1944 Ishevesk M38 The Mosin Men- Founder Order of the Mosin- Founder

08-15-2009, 05:28 AM	#64
wunhunglo Senior Member Join Date: Dec 2007 Location: currently "Sunny West Africa" Posts: 4,102	The best things is life are worth waiting for!! A phone call to the major suppliers/makers should get you that information. __________________ How can I 'Soar with the Eagles' when I'm working with such 'Turkeys'!

08-15-2009, 08:10 AM	#65
Rex Kramer Senior Member Join Date: May 2005 Posts: 607	Most of my pictures were lost, but here are two that I salvaged. Crazy Horse Mk14 SEI Mod 0 MK14 SEI Mod 1 The YouTube video . __________________ Danger Seeker Last edited by Rex Kramer; 08-15-2009 at 08:15 AM.

09-10-2009, 11:10 AM	#68
Rex Kramer Senior Member Join Date: May 2005 Posts: 607	__________________ Danger Seeker

09-15-2009, 03:49 PM	#74
thrillbilly Senior Member Join Date: Apr 2009 Location: Ozark Hill Country Posts: 2,611	This thread is like showing a starvin' man pics of a loaded buffet! My wife might hurt ya'll...I've had a M1A bug my whole life, and ya'll aint helpin'! __________________ *" I won't be wronged, I won't be insulted, and I won't be laid a hand on."* John Wayne

05-06-2009, 12:41 PM	#61
MJ11 Senior Member Join Date: Sep 2008 Posts: 140	03**** ...MJ...

08-15-2009, 05:21 AM	#63
Rifle_Shaman Senior Member Join Date: Aug 2009 Location: North Eastern PA Posts: 164	Hows the supply for these guns in your parts? My local guy told me the back order is so long i should just forget it. Hes usually a very up beat and enthusiastic fellow too

08-22-2009, 08:47 AM	#67
Rex Kramer Senior Member Join Date: May 2005 Posts: 607	Crazy Horse M21A5 EBR __________________ Danger Seeker Last edited by Rex Kramer; 08-23-2009 at 10:29 PM.

09-10-2009, 11:38 AM	#69
nighthawk80 Senior Member Join Date: Nov 2006 Location: Just south of Central Indiana Posts: 478	How do you like the reverse rail for the scope? I have a scout mount on mine and was wondering how well that might work for me.

09-22-2009, 05:04 PM	#76
Rex Kramer Senior Member Join Date: May 2005 Posts: 607	M21A5/RRM __________________ Danger Seeker

10-12-2009, 12:02 PM	#77
MJ11 Senior Member Join Date: Sep 2008 Posts: 140	'81 NM/M21

11-08-2009, 09:20 PM	#80
2dogs Member Join Date: Dec 2008 Location: Georgia Posts: 21	my Polytech M1A,,,SEMPER FI Attached Thumbnails