Marlin 60/795 Accessories

[big shrek]

There are many manufacturers making accessories for Marlin 60's/795's. This includes Furniture (stocks), Sights, and Triggers.

If anyone knows of a MFR that I've missed in the next posts, feel free to make a post below INCLUDING a LINK in the very least to their website...preferrably a Link and Picture of the product. Let's try to keep this "Sticky Worthy" and High in Professional Content.

The Action of the Marlin 60 is basically the same as a Marlin 795...the differences start where the bullets load...so Bolt-On accessories are interchangeable for the OUTSIDE, but the stocks are Slightly differnt configuration.

--I'll be working on this for the next few hours...expect changes between now & midnight--

[big shrek]

First we have stocks...there are only a few MFR's known to me and a few used purveyors, but they're generally enough

Bear in mind that not all 60's are made alike, you have New style with LSHO, and old style without it. There are SLIGHT differences between the two, but nothing that can't be resolved with a little hand-fitting.

Same for the 70/795/995/7000...expect a little modification/pillar bedding to be required for a Perfect Fit.

New:

ATI Fiberforce stock - Marlin Accessories - Marlin Rifle Accessories - Marlin Gun Accessories - Noveltyguns - Marlin Mags & Accessories - Marlin Rifle Stocks
For the 795, you cut out the magwell hole & fill in the magtube area with whatever you prefer. HAND FITTING REQUIRED.


BullpupGunStocks.com | bullpup rifle stocks for Ruger, SKS, M14 / M1A and Marlin brands
Model 60

Model 70


Butler Creek for model 70/995 (have to remove material for LSHO if used for 795)
23943 - Marlin M70/995 Sporter Fixed Stock, Black Polymer


Midway USA
Model 60 Grey Laminate, they do have other choices on their site
MidwayUSA - Marlin Stock 60, 60SS, 75C, 990 Laminated Wood Gray

Model 795 Synthetic
MidwayUSA - Marlin Stock 795





NOS (New, Old Stock) & Used Stocks

Bob's Gun Shop
ALL are MARLIN GUN STOCKS AND FORENDS , Bob's Gun Shop.Marlin Gun Stocks in Walnut and Synthetic Stocks. Marlin Semi Finish Gun Stocks, Marlin Rifle Forends, Marlin Lever Action Stocks and Froends, Marlin Antique Stocks and Forends, Marlin Synthetic

Numrich (e-gunparts.com)
Marlin | Numrich Gun Parts Corp. | e-GunParts.com


I've been bugging the squish out of Richard's Microfit Gunstocks to get a specific line of THESE going...for the 795/60's...but I think it's going to take a lot more letters from a lot more people.
They can at present, be Special Ordered. But feel free to write 'em Richards Microfit Gunstocks
There are 9 million model 70/795's that would love an option of this nature.
http://rifle-stocks.com/silhouette.htm



However, since most 10/22 stocks, with some WECSOG bedding, would work for a 795, and with a lot more mods, would work for a Model 60. Judge for yourself if it is something you'd want to try to handle, but only the VERY experienced in Gunsmithing/stock fitting, IMHO, should even try.


That's the best of what I've found so far on Stocks

Oh, and don't forget Marlin.com for New Items...and a few oddball items that only the guys in Customer Service/Repair know about.

[big shrek]

New Trigger Guards for the 60 (soon for the 795) from Rimfire Technologies.
https://www.rimfiretechnologies.com/...ductCode=15001

Bolt Handles for 60 & 795
https://www.rimfiretechnologies.com/...ductCode=15004

If you use the Contact email, they can get you Gold versions of these which aren't listed at the moment (temporarily out of stock). Like MINE




There's New/NOS/Used from:

Marlin themselves, just call Customer Service. Anything under warranty is FREE.
www.Marlin.com

MidwayUSA
MidwayUSA - The page you were looking for could not be found...***

Bob's
Marlin Gun Parts, Marlin Factrory Gun Parts.Marlin Lever Action gun Parts, Marlin 22 Automatic Parts, Marlin Bolt Action 22 Parts, Marlin Gun Stocks, Marlin Walnut Gun Stocks, Marlin Rifle Sights, Marlin Sight Hoods, Marlin Screws, Marlin Firearms Pa


Brownell's
BROWNELLS : Brownells Search : Search Results for "marlin 60" - World's Largest Supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools



Trigger Itself:
Riflebasix is SUPPOSED to make a Model 60/795 trigger, but i can't find it.

The best MOD I've seen so far to take creep out & make trigger/sear engaugement a light as possible is with THIS...you Drill & Tap a 6/32" hole in a Marlin trigger & put in a 6/32" setscrew for adjustment. Polish the Sear where it mates, adjust the setcrew through trial & error, and you end up with about a 2# to 3# pull with no creep. Looks like this.


This one was done by HotRod9mm of RimFireCentral.com on a not-quite-completed Rimfire Technologies trigger guard. I've got the same 6/32" setscrews, I'm just waiting on a replacement drill press belt so I can do it to all my triggers, and will post on that mod after I complete it.

That's everything I have on Triggers/Action parts so far.

[big shrek]

With sights, you have several Options...Peep, Original (buckhorn) style, and Firesights.

For Scope Mounts...you need a 3/8" rail adaptor style. So you either have to stick with a 3/8" style .22 rail-mounted scope, OR Drill & Tap a Weaver/Picatinny-type rail (like the Weaver TO-10 Universal Top Mount Base).

Peep

Skinner Sights, has several varieties. Most have to be D/T'd on the 60/795 except for the dovetail versions, which slide right on.
Marlin peep sights
Dovetail Peep



Tech-Sights
Tech-SIGHTS Precision Shooting Accessories



Williams
BROWNELLS : WILLIAMS GUN SIGHT : "WGRS" RECEIVER SIGHTS - World's Largest Supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools



Fire Sights/Williams
BROWNELLS : WILLIAMS GUN SIGHT : MARLIN & WINCHESTER LEVER ACTION FIRE SIGHTS - World's Largest Supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools



And of course your standard replacement New/NOS/Used like
Marlin
www.marlin.com

Bob's
Marlin Gun Parts, Marlin Factrory Gun Parts.Marlin Lever Action gun Parts, Marlin 22 Automatic Parts, Marlin Bolt Action 22 Parts, Marlin Gun Stocks, Marlin Walnut Gun Stocks, Marlin Rifle Sights, Marlin Sight Hoods, Marlin Screws, Marlin Firearms Pa

Numrich
Welcome to Numrich Gun Parts Corp.


Hope all this helps the Model 60/795 owners out there

[marlinman795]

Anything for mags?

[big shrek]

Originally Posted by marlinman795

Anything for mags?

That's going to have to be a new thread...

[UtahMike]

Impressive list of accessories. I didn' realize there were that many mods for the 60/795.

[big shrek]

And if you've totally lost your mind...you can do THIS with a Marlin 795



You could also do it with a Marlin 60 for a better effect, the Tube Mag would be where the Ramrod goes


There are more things for Marlin's out there, I just ain't found 'em all yet...but I will

[big shrek]

795 Trigger Guard Fix - RimfireCentral.com Forums

If you are in need of a replacement METAL trigger guard, first send an email to sales@rimfiretechnologies.com

Please include:

Full name
Shipping address
Phone number
Preferred Color (Black/Anodized Alum/Gold)

This way they can let you know Exactly when they are in, the Alum ones are expected in about 10 days.

HotRod9mm used Allen screws on that first one for test purposes "read the thread" But if you like Allen heads...it ain't a bad idea

So far my model 60 T/G in Gold has performed Perfectly
Looks pretty darn nice too

[SwedeSteve]

I just bought a Marlin 60 a few days ago. Thanks for all the great info !!

[99z28monster]

any ideas on the model 7000 shrek? is it compatible with other models parts?

[big shrek]

Originally Posted by 99z28monster

any ideas on the model 7000 shrek? is it compatible with other models parts?

The 7000 is pretty much a Target version of the 795 with a Heavy Target Barrel...it's supposed to have a better trigger & the 7000-T version had a killer Red White & Blue stock. Action should be the same as your standard 795...so it should share the parts.

The chamber in that 7000 barrel is supposed to be semi-match quality...so bullet choice is Highly important.

From what I read on Numrich, the guts are pretty much the same. The big differences being the barrel & trigger...but from the pics I've seen, the trigger doesn't look much different...need to find someone with one to get some closeups.

As far as stocks, anything that'll fit the 795 should fit the 7000...IF you take the time to cut out/sand out extra space for the larger .920 barrel.

If I'm wrong on anything, let me know I've not actually HELD a 7000 yet, only read about 'em. But I'd love to get one of the RWB 7000-T models

[ArkansasHunter]

My Wife. Son and I went to Gander Mountain in Texarkana, Tx. Sunday and one of the things my son wanted to buy while there was Marlin 60 SN which is the synthectic stock tubular magazine model.
They did'nt have one and there data base showed they did'nt stock that model.

Shrek are the accessories for the model 60 tube magazine models or the Clip models ?

If anyone lives near this Gander Mountain they have a Very Good condition 91/30
Mosin Nagant round receiver all matching numbers. Did'nt see the price and it seemed to be very heavy in weight.

[99z28monster]

Thanks for the info Shrek, I will try and remember to get some pics of the trigger assembly next time I am around my 7000

[big shrek]

Originally Posted by ArkansasHunter

My Wife. Son and I went to Gander Mountain in Texarkana, Tx. Sunday and one of the things my son wanted to buy while there was Marlin 60 SN which is the synthectic stock tubular magazine model.
They did'nt have one and there data base showed they did'nt stock that model.

Shrek are the accessories for the model 60 tube magazine models or the Clip models ?

Both. They share the same action, just different bullet loading systems.
60 - tube mag
795 - Clip mag
The only things that doesn't switch back & forth easily is Stocks, & the Trigger Guard...and they are all marked in their descriptions

Also, the 795 is the Rebate one...$20 back from Marlin.
The 60 is the best-selling .22 rifle of all time so far...over 16 million out there when you include the Glenfield Model 99 series (same thing as a 60).

[thrillbilly]

Thanks for the info BS (<lol) I wasn't aware of all the accessories for my Marlins...my wife isn't thankful to you though!

[big shrek]

This is by far, not a complete list.
Just the stuff I found that interested me & I saved...the more I know, the more I can help others.

Marlin oughta hire me

[big shrek]

New Pics Marlin 795 Trigger Guard, Anodized Aluminium.



And no, you can't get that Red unless they get a buncha requests for colors
If you want colors, email 'em HERE
sales@rimfiretechnologies.com

Here's how they come right now...


Several in stock at the moment
Order here
https://www.rimfiretechnologies.com/...ductCode=15028

[big shrek]

for the 800 & 900 series Bolt-Actions.

Shooters Discount, Inc. - (Powered by CubeCart)





Other colors available on their site

[big shrek]

this is HANDY!!!

Just ordered & got mine...now I've got to figure out which rifle to use it on...LOL

https://www.rimfiretechnologies.com/...ductCode=15011


It's a Pic Base that fits on your 3/8" rail! Held on by 6 setscrews, it ain't gonna move like those Other Rails