Swede Stock Disk

SwedeSteve · 12-25-2007, 12:36 PM

Isn't this disk missing something??

OZHUNTER62 · 12-25-2007, 07:30 PM

Hi steve,nothing missing that I can see? the bore is in as new condition it has been miced at 6.50 and there is no need to hold over on the target at 100 mts.Am I missing something??

Regards.

SwedeSteve · 12-25-2007, 07:36 PM

Y is there only one row of numbers? Every one I have seen had 2!

Doctor Larry K · 12-26-2007, 03:44 PM

How can you tell the bore has been miked at 6.5 and what do the numbers mean. I've had mine for years and could never determine what the numbers mean.

Thanks

Doc

OZHUNTER62 · 12-26-2007, 07:00 PM

The large piece of the pie disc is marked with an arrow at the 0 this indicates that it was miced at 6.50 the scale runs from 6.49 to 6.55,the small pie piece is not marked at all indicating that the bore was deemed to be in as new condition when last inspected,the torped indicates that the gun was adapted to take the boat tail 139 gr m/41 spitzer bullet as opposed to the old round nose bullets,these discs with lesser number range are generally found on the older guns.the word overslag refers to the striking point above the point of aim at 100mts,I am not familiar with the scale of measurement used but an abscence of a number in this portion indicates that the gun is accurate at 100mts and the point of aim will be the point of impact.there are many sites out there that will provide more detailed analysis of this disc feature.
Overall and allowing for any wear and tear since this gun was last inspected your disc would indicate that your rifle is in good condition.

Regards.

Plank Road Farm · 12-26-2007, 09:53 PM

Quote:

Originally Posted by SwedeSteve

Isn't this disk missing something??

Stock Discs for 1894 & 1896 Swedish Mausers

This should help you out.

Regards.....

SwedeSteve · 12-28-2007, 01:35 PM

Yea, I understand the disk info. Ive never seen one with only one row of figures. Normally see with 2. M38 vs. M96 or? Look and see... OZ, holdover unit of measurment is streck, which is applied to the decal for holdover based on sights setting.

Mooseman684 · 12-28-2007, 01:56 PM

Different guns...Different disks....

SwedeSteve · 12-28-2007, 02:02 PM

My mistake! Streck is a unit of angle with 6300 streck in a circle. They used it like we use MOA.

12-25-2007, 07:30 PM	#2
OZHUNTER62 Senior Member Join Date: Jul 2007 Posts: 174	Hi steve,nothing missing that I can see? the bore is in as new condition it has been miced at 6.50 and there is no need to hold over on the target at 100 mts.Am I missing something?? Regards. __________________ You dont need a weather man to know which way the wind blows

12-25-2007, 07:36 PM	#3
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 14,121 Images: 1	Y is there only one row of numbers? Every one I have seen had 2! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

12-26-2007, 07:00 PM	#5
OZHUNTER62 Senior Member Join Date: Jul 2007 Posts: 174	The large piece of the pie disc is marked with an arrow at the 0 this indicates that it was miced at 6.50 the scale runs from 6.49 to 6.55,the small pie piece is not marked at all indicating that the bore was deemed to be in as new condition when last inspected,the torped indicates that the gun was adapted to take the boat tail 139 gr m/41 spitzer bullet as opposed to the old round nose bullets,these discs with lesser number range are generally found on the older guns.the word overslag refers to the striking point above the point of aim at 100mts,I am not familiar with the scale of measurement used but an abscence of a number in this portion indicates that the gun is accurate at 100mts and the point of aim will be the point of impact.there are many sites out there that will provide more detailed analysis of this disc feature. Overall and allowing for any wear and tear since this gun was last inspected your disc would indicate that your rifle is in good condition. Regards. __________________ You dont need a weather man to know which way the wind blows

12-28-2007, 01:56 PM	#8
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness...Currently in Holiday, Fla. Posts: 11,002 Images: 2	Different guns...Different disks.... __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

12-28-2007, 02:02 PM	#9
SwedeSteve Thor's Hammer Join Date: Feb 2007 Location: Alaska Posts: 14,121 Images: 1	My mistake! Streck is a unit of angle with 6300 streck in a circle. They used it like we use MOA. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

12-26-2007, 03:44 PM	#4
Doctor Larry K Senior Member Join Date: May 2007 Location: Palm Springs, Calif. Posts: 444	How can you tell the bore has been miked at 6.5 and what do the numbers mean. I've had mine for years and could never determine what the numbers mean. Thanks Doc