RC K98k sight hood .....

Lngstrt · 10-18-2009, 01:24 PM

Hi folks.
I lurk here a bit but I thought I'd ask a question.
I have a 1937 Erma K98k that is a RC. The lock screws, cleaning rod and sight hood were missing. I acquired all three. The screws and rod fit fine. The hood has curved edges on the inside. I can get it on but it rocks back and forth. I also have a Yugo 27/47, with a hood. The sight base there has a groove that the hood slides into.
So .... Should the replacement hood have curved edges? Should the sight base have grooves like the Yugo? Should the '37 Erma not have a hood at all?
I guess that's three questions, huh?
Thanks in advance

PfcDavid_Kocher · 10-18-2009, 01:27 PM

it might just need the exact type of sight hood but if it wobbles left to right and you don't plan on taking it off just take a pair of pliers and bend the bottom inward.

wcassidy · 10-18-2009, 01:50 PM

some of the k98s didn't use sight hoods, if there's a groove for one like on your yugo you're all set otherwise one does not belong...or so i have been informed

Lngstrt · 10-18-2009, 01:59 PM

Thanks ...
Being spring steel it doesn't bend that easy but perhaps the judicious application of a Dremel will do it. I might see if the Yugo one works better.
I bought the hood from the good folks at Numrich ( e-gunparts.com ). Part #48040A
Attached is the pic from their site:

Lngstrt · 10-18-2009, 02:04 PM

I should say .... Dremel the hood not the sight base!!

SightNSqueeze · 10-18-2009, 09:20 PM

Well, for what it is worth, I goggled several images of 1937 Erma K98k service rifles and “none” of them had front sight hoods. If you look at photos of German troops armed with later Kar98k Mausers made at any number of facilities around Europe, they may, or may not have front sight hoods on them. I am guessing your '37 Erma K98k is to accurate specs without the hood.

Lngstrt · 10-18-2009, 11:06 PM

Quote:

Originally Posted by SightNSqueeze

Well, for what it is worth, I goggled several images of 1937 Erma K98k service rifles and “none” of them had front sight hoods.

After looking at a few pics ... I think I'll go with that thought.

10-18-2009, 01:24 PM	#1
Lngstrt Member Join Date: Nov 2008 Posts: 13	RC K98k sight hood ..... Hi folks. I lurk here a bit but I thought I'd ask a question. I have a 1937 Erma K98k that is a RC. The lock screws, cleaning rod and sight hood were missing. I acquired all three. The screws and rod fit fine. The hood has curved edges on the inside. I can get it on but it rocks back and forth. I also have a Yugo 27/47, with a hood. The sight base there has a groove that the hood slides into. So .... Should the replacement hood have curved edges? Should the sight base have grooves like the Yugo? Should the '37 Erma not have a hood at all? I guess that's three questions, huh? Thanks in advance

10-18-2009, 01:27 PM	#2
PfcDavid_Kocher Senior Member Join Date: Nov 2008 Posts: 570	it might just need the exact type of sight hood but if it wobbles left to right and you don't plan on taking it off just take a pair of pliers and bend the bottom inward. __________________ The Man that paints the sky green and the field blue should be sterilized

10-18-2009, 09:20 PM	#6
SightNSqueeze Senior Member Join Date: Sep 2008 Location: Intercoastal Sea Islands, SC, USA Posts: 2,725	Well, for what it is worth, I goggled several images of 1937 Erma K98k service rifles and “none” of them had front sight hoods. If you look at photos of German troops armed with later Kar98k Mausers made at any number of facilities around Europe, they may, or may not have front sight hoods on them. I am guessing your '37 Erma K98k is to accurate specs without the hood. __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Was "Your" Voice Heard Today? NRA-ILA ~~~~~~~~~~~~~~~~~~~~~~~~~~~

10-18-2009, 01:50 PM	#3
wcassidy Senior Member Join Date: Nov 2008 Location: Connecticut Posts: 283	some of the k98s didn't use sight hoods, if there's a groove for one like on your yugo you're all set otherwise one does not belong...or so i have been informed

10-18-2009, 01:59 PM	#4
Lngstrt Member Join Date: Nov 2008 Posts: 13	Thanks ... Being spring steel it doesn't bend that easy but perhaps the judicious application of a Dremel will do it. I might see if the Yugo one works better. I bought the hood from the good folks at Numrich ( e-gunparts.com ). Part #48040A Attached is the pic from their site: Attached Thumbnails

10-18-2009, 02:04 PM	#5
Lngstrt Member Join Date: Nov 2008 Posts: 13	I should say .... Dremel the hood not the sight base!!