Ammo or Rifle

DrewJ · 01-28-2008, 11:45 PM

I have 1953 M44 That ive had for a couple of years. I had actually bought several and made one really nice one. I liked the stock on one and the hardware of the other. I gave the one to my dad that i didnt want, that sounds horrible but it was nice as well. I shot that one before i gave it to him with out any problems. I got mine out today to shoot and i had three consecutive rounds that did not fire. Upon ejection they were all struck on the primer. I have to admit i kind of got a little spooked, so i didnt try anymore.

The ammo was mil-surp and green in color. How likely is it that it's bad ammo. It's in a green box of 20. I would think if it were a firing pin problem it would'nt have dented the primer like it did, but i really don't know.

Mooseman684 · 01-28-2008, 11:55 PM

Did you use the Screwdriver Tool for mosins that has the firing pin gauge cut into it ? If the bolt was disassembled and the pin not reset , It may be a light strike, Just not quite enough..075 is Min, and .095 is Max.... Otherwise, you may have some bad ammo.
Rich

DrewJ · 01-28-2008, 11:59 PM

I dont know if i got a tool with it.

Joshua M. Smith · 01-29-2008, 12:03 AM

Then you probably didn't. It's a teardrop shaped deal.

They're very cheap to order off the internet. Something like five bucks max.

Personally I'd switch to some other ammo and see what happens first, if you don't have the tool, and if it's been firing well up to this point.

Josh <><

DrewJ · 01-29-2008, 12:09 AM

I will have to get one of those, And try some differant ammo, thanks for your replies.

Mooseman684 · 01-29-2008, 12:18 AM

It looks like this...

Ricochet · 01-29-2008, 07:08 PM

The most common cause of a light strike on the primer resulting in failures to fire in these old milsurps is cosmoline hiding out inside the bolt. Take it apart and clean everything inside it really well.

marion57 · 01-30-2008, 12:11 AM

My advise is same as above Take it apart and clean it !!I take every bolt and rifle apart I buy and clean it even the refurbs .. Especially the bolt and check all the adjustments on the bolt..sugest you check out this site
Mosin Nagant Rifle Exploded Views and Disassembly

01-28-2008, 11:45 PM	#1
DrewJ Member Join Date: Jan 2008 Location: Daleville, IN Posts: 36	Ammo or Rifle I have 1953 M44 That ive had for a couple of years. I had actually bought several and made one really nice one. I liked the stock on one and the hardware of the other. I gave the one to my dad that i didnt want, that sounds horrible but it was nice as well. I shot that one before i gave it to him with out any problems. I got mine out today to shoot and i had three consecutive rounds that did not fire. Upon ejection they were all struck on the primer. I have to admit i kind of got a little spooked, so i didnt try anymore. The ammo was mil-surp and green in color. How likely is it that it's bad ammo. It's in a green box of 20. I would think if it were a firing pin problem it would'nt have dented the primer like it did, but i really don't know.

01-28-2008, 11:55 PM	#2
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness. Unit 13 Posts: 12,789	Did you use the Screwdriver Tool for mosins that has the firing pin gauge cut into it ? If the bolt was disassembled and the pin not reset , It may be a light strike, Just not quite enough..075 is Min, and .095 is Max.... Otherwise, you may have some bad ammo. Rich __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

01-29-2008, 12:03 AM	#4
Joshua M. Smith Senior Member Join Date: Dec 2004 Location: Wabash IN Posts: 545	Then you probably didn't. It's a teardrop shaped deal. They're very cheap to order off the internet. Something like five bucks max. Personally I'd switch to some other ammo and see what happens first, if you don't have the tool, and if it's been firing well up to this point. Josh <>< __________________ Is it better to live by a corrupt society's standards rather than face persecution for not doing the same? This is the dilemma we now face. We must hold fast to our convictions as we confront this dilemma. Knowing one's self goes a long way in the crisis. - Me, Standup Philosopher

01-29-2008, 12:18 AM	#6
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness. Unit 13 Posts: 12,789	It looks like this... __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

01-29-2008, 07:08 PM	#7
Ricochet Senior Member Join Date: Jul 2004 Location: Bristol, Tennessee, USA Posts: 166	The most common cause of a light strike on the primer resulting in failures to fire in these old milsurps is cosmoline hiding out inside the bolt. Take it apart and clean everything inside it really well. __________________ "A cheerful heart is good medicine."

01-28-2008, 11:59 PM	#3
DrewJ Member Join Date: Jan 2008 Location: Daleville, IN Posts: 36	I dont know if i got a tool with it.

01-29-2008, 12:09 AM	#5
DrewJ Member Join Date: Jan 2008 Location: Daleville, IN Posts: 36	I will have to get one of those, And try some differant ammo, thanks for your replies.

01-30-2008, 12:11 AM	#8
marion57 Senior Member Join Date: Dec 2007 Location: Missouri Posts: 3,640	My advise is same as above Take it apart and clean it !!I take every bolt and rifle apart I buy and clean it even the refurbs .. Especially the bolt and check all the adjustments on the bolt..sugest you check out this site Mosin Nagant Rifle Exploded Views and Disassembly