ati stocks?

jaeger · 03-16-2008, 12:24 AM

I have a 91/30 that was hacked off to 18" and the stock trimmed. I think I will use this rifle for hog hunting in GA and would like to know if anyone knows how long the fore-end of the ati stocks are. Will I have to trim the stock to correctly fit the 18" barrel. By the way even with a short barrel this thing is a deer slayer off-hand at 200 yds.

SwedeSteve · 03-16-2008, 10:55 AM

Welcome to G&G jaeger! With an original barrel length of 28 3/4 inches, I think it's going to be close on the ATI intened for the M91/30. Maybe you could get the one intended for the M44, and do a little dremeling to fit? Hopefully someone who has one sitting in front of them can measure for you. Again, welcome!

Geo M44 · 03-16-2008, 11:09 AM

Steve, I always thought that the ATI stocks were universal fit (M38, M44, 91/30, etc.) as the pictures I've seen have a lot of barrel overhang with a 91/30. Fer instance (kinda small pic):

SwedeSteve · 03-16-2008, 12:08 PM

Don't know. I was just throwing out some possibilities to research. As I said I don't have one. But from your pic, it looks like the stock would still work with a 18" barrel, don't you think?

EDIT: Went to ATI site, an it is a generic stock for all Mosins. Couldn't find any dimensions. The carbines have a 20 1/4 inch
barrel, but that includes about an inch or so in the receiver.
Jaeger-Where are you measuring fom to get 18" ?

jaeger · 03-16-2008, 04:58 PM

I am measuring from about where the bold face locks up.

jd1911 · 03-16-2008, 05:13 PM

nice collection of firearms

jaeger · 03-16-2008, 05:21 PM

thank you.

texnmidwest · 03-16-2008, 05:36 PM

Jaeger, now that I have just drooled all over my keyboard....tell us to grab a towel before posting stuff like that.

jaeger · 03-16-2008, 06:21 PM

Thanks, Ive actually got quite a few more, however they happen to be illegal in Soviet NJ. So I keep them at my brother in laws in MI.

just_a_car · 03-16-2008, 08:41 PM

Yeah, from the pic with the mosin second from the left (took a while to find it... didn't recognize it at first!) the ATI stock should work just fine on that.

Geo M44 · 03-16-2008, 09:11 PM

The magazine is always what I look for to ID a MN.

Nice group of firearms. We can help store the non-NJ fireams in AZ for ya. Not a problem here. Make sure to ship some ammo so they get warmed up once in a while.

jaeger · 03-16-2008, 10:45 PM

Yeah Jersey sucks. No pistol grip long guns, mag cap 15, no folding or tele-stocks, only certain muzzle brakes, cant hunt with centerfire rifle. I actually have been using this mosin for my camp gun when I go to copper harbor snow-mobiling. Everyone looks at it and says what the hell is that. And I simply reply with "A rifle I know will fire in this weather". I think I will order the ATI tommorow, and worst case just have to trim it. Thanks guys.

03-16-2008, 12:24 AM	#1
jaeger Senior Member Join Date: Dec 2007 Location: NJ Posts: 289 Images: 3	ati stocks? I have a 91/30 that was hacked off to 18" and the stock trimmed. I think I will use this rifle for hog hunting in GA and would like to know if anyone knows how long the fore-end of the ati stocks are. Will I have to trim the stock to correctly fit the 18" barrel. By the way even with a short barrel this thing is a deer slayer off-hand at 200 yds.

03-16-2008, 10:55 AM	#2
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,266 Images: 1	Welcome to G&G jaeger! With an original barrel length of 28 3/4 inches, I think it's going to be close on the ATI intened for the M91/30. Maybe you could get the one intended for the M44, and do a little dremeling to fit? Hopefully someone who has one sitting in front of them can measure for you. Again, welcome! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers Last edited by SwedeSteve; 03-16-2008 at 10:59 AM.

03-16-2008, 12:08 PM	#4
SwedeSteve Bullet Maintenance !! Join Date: Feb 2007 Location: The anchor point, Alaska Posts: 10,266 Images: 1	Don't know. I was just throwing out some possibilities to research. As I said I don't have one. But from your pic, it looks like the stock would still work with a 18" barrel, don't you think? EDIT: Went to ATI site, an it is a generic stock for all Mosins. Couldn't find any dimensions. The carbines have a 20 1/4 inch barrel, but that includes about an inch or so in the receiver. Jaeger-Where are you measuring fom to get 18" ? __________________ Thank God we don't get as much Government as we pay for! -Will Rogers Last edited by SwedeSteve; 03-16-2008 at 12:22 PM.

03-16-2008, 04:58 PM	#5
jaeger Senior Member Join Date: Dec 2007 Location: NJ Posts: 289 Images: 3	I am measuring from about where the bold face locks up. Last edited by jaeger; 03-16-2008 at 05:02 PM. Reason: Automerged Doublepost

03-16-2008, 05:36 PM	#8
texnmidwest Listen to yur Inner Hippo Join Date: Dec 2007 Location: South east Wisconsin Posts: 3,381	Jaeger, now that I have just drooled all over my keyboard....tell us to grab a towel before posting stuff like that. __________________ "Quando Omni Flunkus Moritati" (If all else fails play dead)

03-16-2008, 05:13 PM	#6
jd1911 Banned Join Date: Dec 2006 Posts: 125	nice collection of firearms

03-16-2008, 05:21 PM	#7
jaeger Senior Member Join Date: Dec 2007 Location: NJ Posts: 289 Images: 3	thank you.

03-16-2008, 06:21 PM	#9
jaeger Senior Member Join Date: Dec 2007 Location: NJ Posts: 289 Images: 3	Thanks, Ive actually got quite a few more, however they happen to be illegal in Soviet NJ. So I keep them at my brother in laws in MI.

03-16-2008, 08:41 PM	#10
just_a_car Senior Member Join Date: Oct 2006 Location: Edmonds, WA Posts: 3,509	Yeah, from the pic with the mosin second from the left (took a while to find it... didn't recognize it at first!) the ATI stock should work just fine on that. __________________

03-16-2008, 09:11 PM	#11
Geo M44 Senior Member Join Date: May 2006 Location: The Desert Posts: 2,161	The magazine is always what I look for to ID a MN. Nice group of firearms. We can help store the non-NJ fireams in AZ for ya. Not a problem here. Make sure to ship some ammo so they get warmed up once in a while.

03-16-2008, 10:45 PM	#12
jaeger Senior Member Join Date: Dec 2007 Location: NJ Posts: 289 Images: 3	Yeah Jersey sucks. No pistol grip long guns, mag cap 15, no folding or tele-stocks, only certain muzzle brakes, cant hunt with centerfire rifle. I actually have been using this mosin for my camp gun when I go to copper harbor snow-mobiling. Everyone looks at it and says what the hell is that. And I simply reply with "A rifle I know will fire in this weather". I think I will order the ATI tommorow, and worst case just have to trim it. Thanks guys.