Ex-Sniper Pics

SwedeSteve · 05-04-2008, 03:38 PM

A couple of pics. Just the color of the wood. Then the splice. Then the barrel shank.

Mosin Shooter · 05-04-2008, 04:35 PM

doesnt look like a PU mount was there, looks like that side mount PE spinoff version

just_a_car · 05-04-2008, 05:41 PM

Nope, that's a PU-mount splice. They just went a little too far forward with the splice.

OR... it might be one of those ones that was later on that had the really big side-mounts that Vasily Zaitsev used:

Either way, you can see where the plugged, welded and ground-down holes are on the second picture. A better picture would be with the bolt upon, looking into the receiver from the other side so that we could see what the hole configuration is; that's a clear way to tell what kind of mount it is.

You can see what I'm talking about by looking at the photos here: Mosin Nagant Rifle Feature Comparisons I'm not sure if that's a PEM scope mount VZ has there or the one they're talking about that's "Unknown".

acarpenter · 05-04-2008, 07:00 PM

Its sweet Steve!

texnmidwest · 05-04-2008, 08:37 PM

Tula arsenal even! I am jealous!

SwedeSteve · 05-04-2008, 08:49 PM

The cut is about a 1/4-1/2 inch more forward than my PU Sniper's cut.

Capt'n Mil Coll · 05-04-2008, 11:43 PM

Sweeeeeeeeeeeet Swede.

SwedeSteve · 05-05-2008, 01:43 AM

Thanks guys! Now I SWEAR! No more Mosins!

Mooseman684 · 05-05-2008, 02:06 AM

Yeah...I Have some Bridges for sale.... Cheap too, if you believe that statement...
I'll give him 30 days....

LOL

SwedeSteve · 05-05-2008, 02:15 AM

And thank you for all your support, buddy!

just_a_car · 05-05-2008, 02:16 AM

*points to the mosin dictionary...*

http://www.gunandgame.com/forums/mos...tionary-7.html (Add to the New Mosin Dictionary)

SwedeSteve · 05-05-2008, 02:30 AM

Ok! Don't start skipping me across threads. I am confused already! And you HUSH Moose!

ArkansasHunter · 05-05-2008, 02:39 AM

Nice Mosin Steve

SwedeSteve · 05-05-2008, 02:42 AM

Thanks AH!

Enfield trader · 05-05-2008, 06:44 AM

Your rifle is an ex-PEM side mount just like the pic post by just_a_ car.

PU's were not made until 1942 and they were also producing PEM side mount snipers at the same time.

Most Tula PEM side mounts have one hole in the middle of the side wall when the bolt is open as they did not usually drill the locating pin hole completely through. If you look into the chamber area you will see the other hole.

Mosin Shooter · 05-07-2008, 06:32 PM

Quote:

Originally Posted by just_a_car

Nope, that's a PU-mount splice. They just went a little too far forward with the splice.

OR... it might be one of those ones that was later on that had the really big side-mounts that Vasily Zaitsev used:

Either way, you can see where the plugged, welded and ground-down holes are on the second picture. A better picture would be with the bolt upon, looking into the receiver from the other side so that we could see what the hole configuration is; that's a clear way to tell what kind of mount it is.

You can see what I'm talking about by looking at the photos here: Mosin Nagant Rifle Feature Comparisons I'm not sure if that's a PEM scope mount VZ has there or the one they're talking about that's "Unknown".

tis what i meant

SwedeSteve · 05-07-2008, 06:53 PM

We got ya MS

7mmremmag1995 · 05-07-2008, 07:34 PM

give him a week and i bet my marshmallows on it

Mike82 · 05-08-2008, 10:46 AM

quick question....or 2, maybe 3, depends on what i think up

1) Product ID: RI91S on Products Page ...are those ex-snipers, or regular M91/30's that've been modded for snipers?
2) if they are snipers, is it a good price for them?
3) Product ID: RI038 on Products Page ...is that a good price?
4) since my C&R isnt in yet, anyone mind telling me the prices of those 2 rifles?
and yes, still waiting on someone to get an M91/38......realtor said my house is rdy to sell when an M91/38 comes up for sale

rofl jkjk.

SwedeSteve · 05-08-2008, 11:52 AM

7mm-
Just a week?

Mike-
1) These appear to be repro guns.
3) "cracked" stocks!

05-04-2008, 04:35 PM	#2
Mosin Shooter Senior Member Join Date: Jan 2008 Location: NY Posts: 247	doesnt look like a PU mount was there, looks like that side mount PE spinoff version __________________ In a world were political correctness rules...forget it its too depressing

05-04-2008, 05:41 PM	#3
just_a_car Senior Member Join Date: Oct 2006 Location: Edmonds, WA Posts: 3,382	Nope, that's a PU-mount splice. They just went a little too far forward with the splice. OR... it might be one of those ones that was later on that had the really big side-mounts that Vasily Zaitsev used: Either way, you can see where the plugged, welded and ground-down holes are on the second picture. A better picture would be with the bolt upon, looking into the receiver from the other side so that we could see what the hole configuration is; that's a clear way to tell what kind of mount it is. You can see what I'm talking about by looking at the photos here: Mosin Nagant Rifle Feature Comparisons I'm not sure if that's a PEM scope mount VZ has there or the one they're talking about that's "Unknown". __________________

05-04-2008, 08:37 PM	#5
texnmidwest Senior Member Join Date: Dec 2007 Location: South east Wisconsin Posts: 2,389	Tula arsenal even! I am jealous! __________________ "Quando Omni Flunkus Moritati" (If all else fails play dead)

05-04-2008, 08:49 PM	#6
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	The cut is about a 1/4-1/2 inch more forward than my PU Sniper's cut. __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-04-2008, 11:43 PM	#7
Capt'n Mil Coll Senior Member Join Date: Mar 2008 Location: Right behind you. -NRA Member- Posts: 1,456	Sweeeeeeeeeeeet Swede. __________________ Let's light this fuse and see what happens!

05-04-2008, 07:00 PM	#4
acarpenter Senior Member Join Date: Mar 2008 Location: Lubbock, Texas Posts: 245	Its sweet Steve!

05-05-2008, 01:43 AM	#8
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	Thanks guys! Now I SWEAR! No more Mosins! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-05-2008, 02:06 AM	#9
Mooseman684 Super Moderator Join Date: Dec 2005 Location: Alaska Wilderness Posts: 8,919	Yeah...I Have some Bridges for sale.... Cheap too, if you believe that statement... I'll give him 30 days.... LOL __________________ You know you might be facing your doom,when all you get is a click when you're expecting a BOOM!

05-05-2008, 02:15 AM	#10
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	And thank you for all your support, buddy! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-05-2008, 02:16 AM	#11
just_a_car Senior Member Join Date: Oct 2006 Location: Edmonds, WA Posts: 3,382	points to the mosin dictionary... http://www.gunandgame.com/forums/mos...tionary-7.html (Add to the New Mosin Dictionary) __________________

05-05-2008, 02:30 AM	#12
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	Ok! Don't start skipping me across threads. I am confused already! And you HUSH Moose! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-05-2008, 02:39 AM	#13
ArkansasHunter Senior Member Join Date: Mar 2007 Location: South Arkansas Posts: 9,872	Nice Mosin Steve

05-05-2008, 02:42 AM	#14
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	Thanks AH! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-05-2008, 06:44 AM	#15
Enfield trader Senior Member Join Date: Oct 2006 Posts: 167	Your rifle is an ex-PEM side mount just like the pic post by just_a_ car. PU's were not made until 1942 and they were also producing PEM side mount snipers at the same time. Most Tula PEM side mounts have one hole in the middle of the side wall when the bolt is open as they did not usually drill the locating pin hole completely through. If you look into the chamber area you will see the other hole.

05-07-2008, 06:53 PM	#17
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	We got ya MS __________________ Thank God we don't get as much Government as we pay for! -Will Rogers

05-07-2008, 07:34 PM	#18
7mmremmag1995 Senior Member Join Date: Feb 2008 Location: Kentucky Posts: 1,248	give him a week and i bet my marshmallows on it __________________ Just LeDoux it

05-08-2008, 10:46 AM	#19
Mike82 Senior Member Join Date: Feb 2008 Location: Vicksburg, Mississippi USA Posts: 450	quick question....or 2, maybe 3, depends on what i think up 1) Product ID: RI91S on Products Page ...are those ex-snipers, or regular M91/30's that've been modded for snipers? 2) if they are snipers, is it a good price for them? 3) Product ID: RI038 on Products Page ...is that a good price? 4) since my C&R isnt in yet, anyone mind telling me the prices of those 2 rifles? and yes, still waiting on someone to get an M91/38......realtor said my house is rdy to sell when an M91/38 comes up for sale rofl jkjk. __________________ No Trespassing! Violators Will Be Shot! Survivors Will Be Shot Again!

05-08-2008, 11:52 AM	#20
SwedeSteve Senior Member Join Date: Feb 2007 Location: AnchorTown, Alaska Posts: 6,167	7mm- Just a week? Mike- 1) These appear to be repro guns. 3) "cracked" stocks! __________________ Thank God we don't get as much Government as we pay for! -Will Rogers Last edited by SwedeSteve; 05-08-2008 at 11:54 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode