Concept (the 5 gazillionth one)

BattleRifleG3 · 09-09-2003, 11:42 PM

Ok, here's an idea...
Thinking about what's the best setup for a pistol caliber carbine, and seeing as people pay plenty for an AR carbine, what if someone made a carbine that looks like an AR, operates much like an AR, but with simpler internals, like straight blowback. It would be generally smaller than an AR, with a pistol caliber length action, and would feed with subgun mags.
I figure if people buy entire AR carbines for pistol calibers, they could spend a bit less and get one more compact and dedicated to that caliber.
Just picture an AR with a mag well for subgun mags, a lower barrel axis, and a shorter action. Wouldn't be as space aged in the curves, but they aren't functional anyway.

Wayne · 09-09-2003, 11:49 PM

It's called a Hi-Point

BattleRifleG3 · 09-10-2003, 09:13 AM

Farthest thing from it. I'm talking alloy or steel upper with lower trigger/grip assembly. Mag well would probably be in upper receiver like FAL. Furniture could even be from the AR for standardization. Maybe even a firing component or two. Plus a picatinny rail for a carry handle and front site.

Hi Points have a single piece polymer stock with a single stack mag in the grip. And I don't think what I'm describing could co for $150ish. More like $3-400, or more.

Doglips · 09-11-2003, 11:03 AM

Why not figureout how to convert a Hi Point carbine to accept hi cap mags...lots of them out there???

BattleRifleG3 · 09-11-2003, 02:41 PM

Thought about that... Would have to buy one to see, and take it apart. While Hi-Point itself could easily just mold it with another mag well, and even then it would probably only be able to use pistol, not subgun mags. My objective is an AR style carbine using cheap and big subgun mags.

BattleRifleG3 · 09-11-2003, 04:45 PM

Tell ya what, there's a few screwed up damaged hi-points out there, suppose anyone would want to send me one for a song (I do sing) and I could rip it open and see what can be done?

09-09-2003, 11:42 PM	#1
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401	Concept (the 5 gazillionth one) Ok, here's an idea... Thinking about what's the best setup for a pistol caliber carbine, and seeing as people pay plenty for an AR carbine, what if someone made a carbine that looks like an AR, operates much like an AR, but with simpler internals, like straight blowback. It would be generally smaller than an AR, with a pistol caliber length action, and would feed with subgun mags. I figure if people buy entire AR carbines for pistol calibers, they could spend a bit less and get one more compact and dedicated to that caliber. Just picture an AR with a mag well for subgun mags, a lower barrel axis, and a shorter action. Wouldn't be as space aged in the curves, but they aren't functional anyway. __________________ Trust is earned, not... GIVEN away. - Worf

09-09-2003, 11:49 PM	#2
Wayne Senior Member Join Date: Mar 2002 Location: Copperas Cove TX Posts: 307	It's called a Hi-Point __________________ You give peace a chance. I'll stay back here and cover you, just in case it don't work out. Moderation is for Monks

09-10-2003, 09:13 AM	#3
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401	Farthest thing from it. I'm talking alloy or steel upper with lower trigger/grip assembly. Mag well would probably be in upper receiver like FAL. Furniture could even be from the AR for standardization. Maybe even a firing component or two. Plus a picatinny rail for a carry handle and front site. Hi Points have a single piece polymer stock with a single stack mag in the grip. And I don't think what I'm describing could co for $150ish. More like $3-400, or more. __________________ Trust is earned, not... GIVEN away. - Worf Last edited by BattleRifleG3; 09-10-2003 at 09:16 AM.

09-11-2003, 02:41 PM	#5
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401	Thought about that... Would have to buy one to see, and take it apart. While Hi-Point itself could easily just mold it with another mag well, and even then it would probably only be able to use pistol, not subgun mags. My objective is an AR style carbine using cheap and big subgun mags. __________________ Trust is earned, not... GIVEN away. - Worf

09-11-2003, 04:45 PM	#6
BattleRifleG3 Super Moderator Join Date: Mar 2002 Location: Western PA Posts: 11,401	Tell ya what, there's a few screwed up damaged hi-points out there, suppose anyone would want to send me one for a song (I do sing) and I could rip it open and see what can be done? __________________ Trust is earned, not... GIVEN away. - Worf

09-11-2003, 11:03 AM	#4
Doglips Senior Member Join Date: Mar 2002 Location: Cocoa Florida Posts: 9,090	Why not figureout how to convert a Hi Point carbine to accept hi cap mags...lots of them out there???

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode