[GoodAim]

Seems to be a good shooting little pellet rifle. Alittle heavy though. Anyone else have one of these. It came with a decent scope. I was looking at the Gamo air rifles but they wanted alot of dough for one so I decided to pass on it.

[jerry]

They have been puting out good air rifles for a long time. I also found the ergonomics a bit ungangly. good hardware though.

[GoodAim]

Yea I have fired about 50 pellets thru it seems to be a good shooter though. I have had to get used to the stock.

[29er savoy]

new to this forum glad it's up and running i had daisy bb/pellet years ago it was suprisingly accurate i recently got back into air guns and purchased a beeman r-7 in 20 cal. and just took delivery of a crossman 2300s target pistol, the red dot for it should arrive friday. so i have a springer and a c02.and my daisy(a.k.a. truck gun) anybody have any experiance with tec force guns hows the quality and accuracy? the price seems good, as mom said be carefull.. "YOU'LL SHOOT YOUR EYE OUT"

[ranaylor]

Have a 1000. Kills squirrels easily. two today. Optics are cheap, but work. A bit heavy for a pellet gun, but manageable. Really accurate with 5 shot groups at 20 yards in the 5 inch range. The one thing I don't like and don't know how to fix is the trigger pull. It is far to heavy and too long. Anyone have an idea how to fix that and I would have a pretty good varmint rifle. Thanks!

[Smith&WessonGuy]

I have the 1000sb with the synthetic stock and its awesome. Great gun for the money. I accidently left it on the trunk of my car one day and drove off the next morning with it still on it. It flew off into the road when i went around a turn. It had a couple of scratches on it but it still shot fine. Very durable and accurate if sighted in. Good buy!

[b2f6l12]

Quote:       Originally Posted by ranaylor

Have a 1000. Kills squirrels easily. two today. Optics are cheap, but work. A bit heavy for a pellet gun, but manageable. Really accurate with 5 shot groups at 20 yards in the 5 inch range. The one thing I don't like and don't know how to fix is the trigger pull. It is far to heavy and too long. Anyone have an idea how to fix that and I would have a pretty good varmint rifle. Thanks!

I agree on the trigger pull, and could never get the scope mounted so it would stay in place. Makes accurate shooting difficult. I can deal with the scope, but the trigger pull is a problem. Any suggestions?

[cubesmoothie]

yeah i've got one of those its called the winchester 1000x i believe. I use it to squirrel / rabbit hunt one of my friends has 35 acres in the city limits so its a great gun for that. Mines accurate i always go for head shots or chest.

[ninjatoth]

I had one,it was pretty good.They will last forever if you treat it right and only fire pellets,don't try even 1 bb,or it will be junk fast.I sawed the barrel down to make a sawed off pellet gun and it took forever,it is really good steel all the way through unlike some pellet guns.The stock is junk and the screws come out after a few shots,but for $100 it isn't a bad gun.

[ninjatoth]

Quote:      

I agree on the trigger pull, and could never get the scope mounted so it would stay in place. Makes accurate shooting difficult. I can deal with the scope, but the trigger pull is a problem. Any suggestions?

Not all spring pellet guns have a bad trigger,I know the RWS guns have a hair trigger,but for the scope issue,all spring guns have that issue,the spring goes forward,sliding the scope back,there really isnt a fix for it,I had a hole drilled in the gun and a pin put in the scope,and it still slid back.