Hey Roadie, I'm getting the same press. the only dies I saw that Hornady warned against was other brands crimp dies. Other then that, just make sure to use/get carbide dies or dies with the carbide inserts.
If you want to use Hornady's brands, they are Carbide inserted, like Dillon brands, and I found them really reasonable at Midway and Midsouth Reloading. In fact, they Midsouth,have the press, if you haven't bought it yet, for $344.99.
Midsouth*HORNADY/PACIFIC RELOADING TOOLS*LOCK-N-LOAD AUTO PROGRESSIVE PRESS
Anyhow, here's the NOTE:/Warning from Hornady on the crimp dies. This is copy and pasted from Hornady's site, Lock n Load AP press page.>>>>>>>>>>>
*Note: Some manufacturers taper crimp dies may interfere with the ejector wire when they are used in station 5. Hornady New Dimension Taper Crimp Dies are designed to work flawlessly in station 5. If you will be using dies other than Hornady, we suggest that you use our powder through expander and install the taper crimp die in the 4th station. Ejector wires are set at the factory and we
DO NOT RECOMMEND adjustment.
Only thing I've found or was informed about.
