I'm a lifelong semi-auto guy who just recently started shooting revolvers. I used to use Q Tips on all of my semi-autos and they worked famously, since most edges in semi-autos are smooth. I'm discovering that revolvers, on the other hand, have more rough edges (around the barrel...and the shell extractor particularly. I'm getting little strands of cotton everywhere and it's driving me nuts. What do you guys use to clean yours?
__________________
I'll keep my freedom, guns and money. You can keep the "Change."
I'm a lifelong semi-auto guy who just recently started shooting revolvers. I used to use Q Tips on all of my semi-autos and they worked famously, since most edges in semi-autos are smooth. I'm discovering that revolvers, on the other hand, have more rough edges (around the barrel...and the shell extractor particularly. I'm getting little strands of cotton everywhere and it's driving me nuts. What do you guys use to clean yours?
Have you tried a baor Snake? I use that and a face cloth. Even a cut up old T-Shirt has worked too.
I love my bore snakes. I ahve one in .38 and .22 and use the heck out of 'em. But, I'm talking more along the lines of cleaning around little goofy areas. Stuff you'd pick at with a Q tip.... like under the shell extractor or the corners on the inside of the frame around the cylinder...
__________________
I'll keep my freedom, guns and money. You can keep the "Change."
Brass brushes, like for a grill. They come in toothbrush-like sizes and work very well for getting around the forcing cone, the extractor, and so on. You can get a pack of them at a big box store for like 2 bucks.
Since the metal is softer than the steel and my gun isn't plated, nothing scratches.
Nylon brush for exterior.
Bronze brush for forcing cone area and front of cylinder.
Bronze bore brush for barrel followed by cotton patches.
Bronze chamber brush for chambers.
Rinse it all with Outers spray solvent.
Run a patch each through each chamber and the bore.
I use a bore snake on the 0.22 chambers, but not the bore. I know they are popular, but it seems to me that they are like running a dirty patch through the bore.
All that is for stainless steel, which all my revolvers are. I wouldn't use any kind of metal brush on a blued exterior or nickle. I would never use a steel brush on anything.
Nylon brush for exterior.
Bronze brush for forcing cone area and front of cylinder.
Bronze bore brush for barrel followed by cotton patches.
Bronze chamber brush for chambers.
Rinse it all with Outers spray solvent.
Run a patch each through each chamber and the bore.
I use a bore snake on the 0.22 chambers, but not the bore. I know they are popular, but it seems to me that they are like running a dirty patch through the bore.
A brass brush won't hurt a blued gun. Do as much brushing as you need to and then work a patch around those parts. There are a few places that get dirty that don't really hurt function. The underside of the topstrap, the outside face of the crane, the front edge, not face, of the cylinder. But if you don't clean'm your gun will look dirty. you can fold a patch over the end of a flat ended screwdriver and use that to get into some of the tight spots.
__________________
Aim real good we're nearly out of ammo.
Are they brass? Come to think of it, I just buy the ones that are the right color (and size). I don't remember what the package actually says.
Okay see...now you went and made me really think about this.
Apparently I have both bronze cleaning brushes from a cleaning kit and brass brushes as well. Honestly I've never noticed a difference in use except that I was right the first time. You can buy the brass grill brushes at a big box store.
Okay, now I have to ask is there some difference I'm not seeing?
Location: a secret lab on the shores of lake titicaca
Posts: 23,062
Quote:
Originally Posted by Airweight38
I love my bore snakes. I ahve one in .38 and .22 and use the heck out of 'em. But, I'm talking more along the lines of cleaning around little goofy areas. Stuff you'd pick at with a Q tip.... like under the shell extractor or the corners on the inside of the frame around the cylinder...
plastic as well as brass/bronze brushes.
regular bore brushes
and the good ol boresnake
__________________ "I don't practice what I preach because I'm not the kind of person I'm preaching to."
I know I will catch it for this but over cleaning in some places like the frame over the chamber and around the barrel/frame.Every time you clean it down to metal,the next time you shoot it the hot powder/gasses have bare metal to work on until it builds up again.As long as the buildup isnt bothering the function,it is benefitting you. sam.
